diff options
Diffstat (limited to 'src/soc/intel/sch/acpi/smbus.asl')
-rw-r--r-- | src/soc/intel/sch/acpi/smbus.asl | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/src/soc/intel/sch/acpi/smbus.asl b/src/soc/intel/sch/acpi/smbus.asl new file mode 100644 index 0000000000..3354b03c4b --- /dev/null +++ b/src/soc/intel/sch/acpi/smbus.asl @@ -0,0 +1,240 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2009 coresystems GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// Intel SMBus Controller 0:1f.3 + +Device (SBUS) +{ + Name (_ADR, 0x001f0003) + + OperationRegion (SMBP, PCI_Config, 0x00, 0x100) + Field(SMBP, DWordAcc, NoLock, Preserve) + { + Offset(0x40), + , 2, + I2CE, 1 + } + + /* + OperationRegion (SMBI, SystemIO, 0x400, 0x20) + Field (SMBI, ByteAcc, NoLock, Preserve) + { + HSTS, 8, // Host Status + , 8, + HCNT, 8, // Host Control + HCMD, 8, // Host Command + TXSA, 8, // Transmit Slave Address + DAT0, 8, // Host Data 0 + DAT1, 8, // Host Data 1 + HBDB, 8, // Host Block Data Byte + PECK, 8, // Packet Error Check + RXSA, 8, // Receive Slave Address + RXDA, 16, // Receive Slave Data + AUXS, 8, // Auxiliary Status + AUXC, 8, // Auxiliary Control + SLPC, 8, // SMLink Pin Control + SBPC, 8, // SMBus Pin Control + SSTS, 8, // Slave Status + SCMD, 8, // Slave Command + NADR, 8, // Notify Device Address + NDLB, 8, // Notify Data Low Byte + NDLH, 8, // Notify Data High Byte + } + + // Kill all SMBus communication + Method (KILL, 0, Serialized) + { + Or (HCNT, 0x02, HCNT) // Send Kill + Or (HSTS, 0xff, HSTS) // Clean Status + } + + // Check if last operation completed + // return Failure = 0, Success = 1 + Method (CMPL, 0, Serialized) + { + Store (4000, Local0) // Timeout 200ms in 50us steps + While (Local0) { + If (And(HSTS, 0x02)) { // Completion Status? + Return (1) // Operation Completed + } Else { + Stall (50) + Decrement (Local0) + If (LEqual(Local0, 0)) { + KILL() + } + } + } + + Return (0) // Failure + } + + + // Wait for SMBus to become ready + Method (SRDY, 0, Serialized) + { + Store (200, Local0) // Timeout 200ms + While (Local0) { + If (And(HSTS, 0x40)) { // IN_USE? + Sleep(1) // Wait 1ms + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + Return (1) + } + } Else { + Store (0, Local0) // We're ready + } + } + + Store (4000, Local0) // Timeout 200ms (50us * 4000) + While (Local0) { + If (And (HSTS, 0x01)) { // Host Busy? + Stall(50) // Wait 50us + Decrement(Local0) // timeout-- + If (LEqual(Local0, 0)) { + KILL() + } + } Else { + Return (0) // Success + } + } + + Return (1) // Failure + } + + // SMBus Send Byte + // Arg0: Address + // Arg1: Data + // Return: 1 = Success, 0=Failure + + Method (SSXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Data + + Store (0x48, HCNT) // Start + Byte Data Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Receive Byte + // Arg0: Address + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRXB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + + Store (0x44, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } + + + // SMBus Write Byte + // Arg0: Address + // Arg1: Command + // Arg2: Data + // Return: 1 = Success, 0=Failure + + Method (SWRB, 3, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0) + } + + // Send Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Arg0, TXSA) // Write Address + Store (Arg1, HCMD) // Write Command + Store (Arg2, DAT0) // Write Data + + Store (0x48, HCNT) // Start + Byte Protocol + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (1) // Success + } + + Return (0) + } + + + // SMBus Read Byte + // Arg0: Address + // Arg1: Command + // Return: 0xffff = Failure, Data (8bit) = Success + + Method (SRDB, 2, Serialized) + { + + // Is the SMBus Controller Ready? + If (SRDY()) { + Return (0xffff) + } + + // Receive Byte + Store (0, I2CE) // SMBus Enable + Store (0xbf, HSTS) + Store (Or (Arg0, 1), TXSA) // Write Address + Store (Arg1, HCMD) // Command + + Store (0x48, HCNT) // Start + + If (CMPL()) { + Or (HSTS, 0xff, HSTS) // Clean up + Return (DAT0) // Success + } + + Return (0xffff) + } + */ + + // Todo: Does anyone ever use these? + // Missing: Read / Write Word + // Missing: Read / Write Block +} |