diff options
Diffstat (limited to 'src/soc/intel/common')
-rw-r--r-- | src/soc/intel/common/block/fast_spi/Kconfig | 4 | ||||
-rw-r--r-- | src/soc/intel/common/block/fast_spi/Makefile.inc | 21 | ||||
-rw-r--r-- | src/soc/intel/common/block/fast_spi/fast_spi.c | 205 | ||||
-rw-r--r-- | src/soc/intel/common/block/fast_spi/fast_spi_def.h | 157 | ||||
-rw-r--r-- | src/soc/intel/common/block/fast_spi/fast_spi_flash.c | 352 | ||||
-rw-r--r-- | src/soc/intel/common/block/include/intelblocks/fast_spi.h | 67 |
6 files changed, 806 insertions, 0 deletions
diff --git a/src/soc/intel/common/block/fast_spi/Kconfig b/src/soc/intel/common/block/fast_spi/Kconfig new file mode 100644 index 0000000000..87edb92095 --- /dev/null +++ b/src/soc/intel/common/block/fast_spi/Kconfig @@ -0,0 +1,4 @@ +config SOC_INTEL_COMMON_BLOCK_FAST_SPI + bool + help + Intel Processor common FAST_SPI support diff --git a/src/soc/intel/common/block/fast_spi/Makefile.inc b/src/soc/intel/common/block/fast_spi/Makefile.inc new file mode 100644 index 0000000000..9c75f3bc46 --- /dev/null +++ b/src/soc/intel/common/block/fast_spi/Makefile.inc @@ -0,0 +1,21 @@ +bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c + +verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c + +romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c + +ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c + +postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c + +ifeq ($(CONFIG_SPI_FLASH_SMM),y) +smm-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi.c +smm-$(CONFIG_SOC_INTEL_COMMON_BLOCK_FAST_SPI) += fast_spi_flash.c +endif + +CPPFLAGS_common += -I$(src)/soc/intel/common/block/fast_spi diff --git a/src/soc/intel/common/block/fast_spi/fast_spi.c b/src/soc/intel/common/block/fast_spi/fast_spi.c new file mode 100644 index 0000000000..603af16881 --- /dev/null +++ b/src/soc/intel/common/block/fast_spi/fast_spi.c @@ -0,0 +1,205 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/io.h> +#include <assert.h> +#include <device/pci_def.h> +#include <commonlib/helpers.h> +#include <console/console.h> +#include <fast_spi_def.h> +#include <intelblocks/fast_spi.h> +#include <soc/intel/common/spi_flash.h> +#include <soc/pci_devs.h> +#include <spi_flash.h> +#include <spi-generic.h> +#include <stdlib.h> +#include <string.h> + +/* + * Get the FAST_SPIBAR. + */ +void *fast_spi_get_bar(void) +{ + device_t dev = PCH_DEV_SPI; + uintptr_t bar; + + bar = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + assert(bar != 0); + /* + * Bits 31-12 are the base address as per EDS for SPI, + * Don't care about 0-11 bit + */ + return (void *)(bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK); +} + +/* + * Disable the BIOS write protect and Enable Prefetching and Caching. + */ +void fast_spi_init(void) +{ + device_t dev = PCH_DEV_SPI; + uint8_t bios_cntl; + + bios_cntl = pci_read_config8(dev, SPIBAR_BIOS_CONTROL); + + /* Disable the BIOS write protect so write commands are allowed. */ + bios_cntl &= ~SPIBAR_BIOS_CONTROL_EISS; + bios_cntl |= SPIBAR_BIOS_CONTROL_WPD; + /* Enable Prefetching and caching. */ + bios_cntl |= SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE; + bios_cntl &= ~SPIBAR_BIOS_CONTROL_CACHE_DISABLE; + + pci_write_config8(dev, SPIBAR_BIOS_CONTROL, bios_cntl); +} + +/* + * Set FAST_SPIBAR BIOS Control BILD bit. + */ +static void fast_spi_set_bios_control_reg(uint8_t bios_cntl_bit) +{ + device_t dev = PCH_DEV_SPI; + uint8_t bc_cntl; + + assert((bios_cntl_bit & (bios_cntl_bit - 1)) == 0); + bc_cntl = pci_read_config8(dev, SPIBAR_BIOS_CONTROL); + bc_cntl |= bios_cntl_bit; + pci_write_config8(dev, SPIBAR_BIOS_CONTROL, bc_cntl); +} + +/* + * Set FAST_SPIBAR BIOS Control BILD bit. + */ +void fast_spi_set_bios_interface_lock_down(void) +{ + fast_spi_set_bios_control_reg(SPIBAR_BIOS_CONTROL_BILD); +} + +/* + * Set FAST_SPIBAR BIOS Control LE bit. + */ +void fast_spi_set_lock_enable(void) +{ + fast_spi_set_bios_control_reg(SPIBAR_BIOS_CONTROL_LOCK_ENABLE); +} + +/* + * Set FAST_SPIBAR BIOS Control EISS bit. + */ +void fast_spi_set_eiss(void) +{ + fast_spi_set_bios_control_reg(SPIBAR_BIOS_CONTROL_EISS); +} + +/* + * Set FAST_SPI opcode menu. + */ +void fast_spi_set_opcode_menu(void) +{ + void *spibar = fast_spi_get_bar(); + + write16(spibar + SPIBAR_PREOP, SPI_OPPREFIX); + write16(spibar + SPIBAR_OPTYPE, SPI_OPTYPE); + write32(spibar + SPIBAR_OPMENU_LOWER, SPI_OPMENU_LOWER); + write32(spibar + SPIBAR_OPMENU_UPPER, SPI_OPMENU_UPPER); +} + +/* + * Lock FAST_SPIBAR. + */ +void fast_spi_lock_bar(void) +{ + void *spibar = fast_spi_get_bar(); + uint32_t hsfs; + + hsfs = read32(spibar + SPIBAR_HSFSTS_CTL); + hsfs |= SPIBAR_HSFSTS_FLOCKDN; + write32(spibar + SPIBAR_HSFSTS_CTL, hsfs); +} + +/* + * Set FAST_SPIBAR Soft Reset Data Register value. + */ +void fast_spi_set_strap_msg_data(uint32_t soft_reset_data) +{ + void *spibar = fast_spi_get_bar(); + uint32_t ssl, ssms; + + /* Set Strap Lock Disable */ + ssl = read32(spibar + SPIBAR_RESET_LOCK); + ssl &= ~SPIBAR_RESET_LOCK_ENABLE; + write32(spibar + SPIBAR_RESET_LOCK, ssl); + + /* Write Soft Reset Data register at SPIBAR0 offset 0xF8[0:15] */ + write32(spibar + SPIBAR_RESET_DATA, soft_reset_data); + + /* Set Strap Mux Select set to '1' */ + ssms = read32(spibar + SPIBAR_RESET_CTRL); + ssms |= SPIBAR_RESET_CTRL_SSMC; + write32(spibar + SPIBAR_RESET_CTRL, ssms); + + /* Set Strap Lock Enable */ + ssl = read32(spibar + SPIBAR_RESET_LOCK); + ssl |= SPIBAR_RESET_LOCK_ENABLE; + write32(spibar + SPIBAR_RESET_LOCK, ssl); +} + +/* + * Returns bios_start and fills in size of the BIOS region. + */ +size_t fast_spi_get_bios_region(size_t *bios_size) +{ + size_t bios_start, bios_end; + /* + * BIOS_BFPREG provides info about BIOS Flash Primary Region + * Base and Limit. + * Base and Limit fields are in units of 4KiB. + */ + uint32_t val = read32(fast_spi_get_bar() + SPIBAR_BFPREG); + + bios_start = (val & SPIBAR_BFPREG_PRB_MASK) * 4 * KiB; + bios_end = (((val & SPIBAR_BFPREG_PRL_MASK) >> + SPIBAR_BFPREG_PRL_SHIFT) + 1) * 4 * KiB; + *bios_size = bios_end - bios_start; + return bios_start; +} + +/* + * Program temporary BAR for SPI in case any of the stages before ramstage need + * to access FAST_SPI MMIO regs. Ramstage will assign a new BAR during PCI + * enumeration. + */ +void fast_spi_early_init(uintptr_t spi_base_address) +{ + device_t dev = PCH_DEV_SPI; + uint8_t pcireg; + + /* Assign Resources to SPI Controller */ + /* Clear BIT 1-2 SPI Command Register */ + pcireg = pci_read_config8(dev, PCI_COMMAND); + pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + pci_write_config8(dev, PCI_COMMAND, pcireg); + + /* Program Temporary BAR for SPI */ + pci_write_config32(dev, PCI_BASE_ADDRESS_0, + spi_base_address | PCI_BASE_ADDRESS_SPACE_MEMORY); + + /* Enable Bus Master and MMIO Space */ + pcireg = pci_read_config8(dev, PCI_COMMAND); + pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config8(dev, PCI_COMMAND, pcireg); + + /* Initialize SPI to allow BIOS to write/erase on flash. */ + fast_spi_init(); +} diff --git a/src/soc/intel/common/block/fast_spi/fast_spi_def.h b/src/soc/intel/common/block/fast_spi/fast_spi_def.h new file mode 100644 index 0000000000..1262e6aed0 --- /dev/null +++ b/src/soc/intel/common/block/fast_spi/fast_spi_def.h @@ -0,0 +1,157 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BLOCK_FAST_SPI_DEF_H +#define SOC_INTEL_COMMON_BLOCK_FAST_SPI_DEF_H + +/* PCI configuration registers */ + +#define SPIDVID_OFFSET 0x0 +#define SPIBAR_BIOS_CONTROL 0xdc + +/* Bit definitions for BIOS_CONTROL */ +#define SPIBAR_BIOS_CONTROL_WPD (1 << 0) +#define SPIBAR_BIOS_CONTROL_LOCK_ENABLE (1 << 1) +#define SPIBAR_BIOS_CONTROL_CACHE_DISABLE (1 << 2) +#define SPIBAR_BIOS_CONTROL_PREFETCH_ENABLE (1 << 3) +#define SPIBAR_BIOS_CONTROL_EISS (1 << 5) +#define SPIBAR_BIOS_CONTROL_BILD (1 << 7) + +/* Register offsets from the MMIO region base (PCI_BASE_ADDRESS_0) */ + +#define SPIBAR_BFPREG 0x00 +#define SPIBAR_HSFSTS_CTL 0x04 +#define SPIBAR_FADDR 0x08 +#define SPIBAR_FDATA(n) (0x10 + ((n) & 0xf) * 4) +#define SPIBAR_FPR_BASE 0x84 +#define SPIBAR_FPR(n) 0x84 + (4 * n)) +#define SPIBAR_PREOP 0xA4 +#define SPIBAR_OPTYPE 0xA6 +#define SPIBAR_OPMENU_LOWER 0xA8 +#define SPIBAR_OPMENU_UPPER 0xAc +#define SPIBAR_FDOC 0xB4 +#define SPIBAR_FDOD 0xB8 +#define SPIBAR_PTINX 0xcc +#define SPIBAR_PTDATA 0xd0 + +/* Bit definitions for BFPREG (0x00) register */ +#define SPIBAR_BFPREG_PRB_MASK (0x7fff) +#define SPIBAR_BFPREG_PRL_SHIFT (16) +#define SPIBAR_BFPREG_PRL_MASK (0x7fff << SPIBAR_BFPREG_PRL_SHIFT) +#define SPIBAR_BFPREG_SBRS (1 << 31) + +/* Bit definitions for HSFSTS_CTL (0x04) register */ +#define SPIBAR_HSFSTS_FDBC_MASK (0x3f << 24) +#define SPIBAR_HSFSTS_FDBC(n) (((n) << 24) & SPIBAR_HSFSTS_FDBC_MASK) +#define SPIBAR_HSFSTS_WET (1 << 21) +#define SPIBAR_HSFSTS_FCYCLE_MASK (0xf << 17) +#define SPIBAR_HSFSTS_FCYCLE(cyc) (((cyc) << 17) \ + & SPIBAR_HSFSTS_FCYCLE_MASK) +/* Supported flash cycle types */ +#define SPIBAR_HSFSTS_CYCLE_READ SPIBAR_HSFSTS_FCYCLE(0) +#define SPIBAR_HSFSTS_CYCLE_WRITE SPIBAR_HSFSTS_FCYCLE(2) +#define SPIBAR_HSFSTS_CYCLE_4K_ERASE SPIBAR_HSFSTS_FCYCLE(3) +#define SPIBAR_HSFSTS_CYCLE_64K_ERASE SPIBAR_HSFSTS_FCYCLE(4) +#define SPIBAR_HSFSTS_CYCLE_RD_STATUS SPIBAR_HSFSTS_FCYCLE(8) + +#define SPIBAR_HSFSTS_FGO (1 << 16) +#define SPIBAR_HSFSTS_FLOCKDN (1 << 15) +#define SPIBAR_HSFSTS_FDV (1 << 14) +#define SPIBAR_HSFSTS_FDOPSS (1 << 13) +#define SPIBAR_HSFSTS_SAF_CE (1 << 8) +#define SPIBAR_HSFSTS_SAF_ACTIVE (1 << 7) +#define SPIBAR_HSFSTS_SAF_LE (1 << 6) +#define SPIBAR_HSFSTS_SCIP (1 << 5) +#define SPIBAR_HSFSTS_SAF_DLE (1 << 4) +#define SPIBAR_HSFSTS_SAF_ERROR (1 << 3) +#define SPIBAR_HSFSTS_AEL (1 << 2) +#define SPIBAR_HSFSTS_FCERR (1 << 1) +#define SPIBAR_HSFSTS_FDONE (1 << 0) +#define SPIBAR_HSFSTS_W1C_BITS (0xff) + +#define WPSR_MASK_SRP0_BIT 0x80 + +/* Bit definitions for FADDR (0x08) register */ +#define SPIBAR_FADDR_MASK 0x7FFFFFF + +/* Maximum bytes of data that can fit in FDATAn (0x10) registers */ +#define SPIBAR_FDATA_FIFO_SIZE 0x40 + +/* Bit definitions for FDOC (0xB4) register */ +#define SPIBAR_FDOC_COMPONENT (1 << 12) +#define SPIBAR_FDOC_FDSI_1 (1 << 2) + +/* Flash Descriptor Component Section - Component 0 Density Bit Settings */ +#define FLCOMP_C0DEN_MASK 0xF +#define FLCOMP_C0DEN_8MB 4 +#define FLCOMP_C0DEN_16MB 5 +#define FLCOMP_C0DEN_32MB 6 + +/* Bit definitions for FPRn (0x84 + (4 * n)) registers */ +#define SPIBAR_FPR_WPE (1 << 31) /* Flash Write protected */ +#define SPIBAR_FPR_MAX 5 + +/* Programmable values for OPMENU_LOWER(0xA8) & OPMENU_UPPER(0xAC) register */ +#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ +#define SPI_OPTYPE_0 0x01 /* Write, no address */ +#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ +#define SPI_OPTYPE_1 0x03 /* Write, address required */ +#define SPI_OPMENU_2 0x03 /* READ: Read Data */ +#define SPI_OPTYPE_2 0x02 /* Read, address required */ +#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ +#define SPI_OPTYPE_3 0x00 /* Read, no address */ +#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ +#define SPI_OPTYPE_4 0x03 /* Write, address required */ +#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ +#define SPI_OPTYPE_5 0x00 /* Read, no address */ +#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ +#define SPI_OPTYPE_6 0x03 /* Write, address required */ +#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ +#define SPI_OPTYPE_7 0x02 /* Read, address required */ +#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ + (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) +#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ + (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) +#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ + (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ + (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ + (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) +#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ + +/* Bit definitions for PTINX (0xCC) register */ +#define SPIBAR_PTINX_COMP_0 (0 << 14) +#define SPIBAR_PTINX_COMP_1 (1 << 14) +#define SPIBAR_PTINX_HORD_SFDP (0 << 12) +#define SPIBAR_PTINX_HORD_PARAM (1 << 12) +#define SPIBAR_PTINX_HORD_JEDEC (2 << 12) +#define SPIBAR_PTINX_IDX_MASK 0xffc + +/* Register Offsets of BIOS Flash Program Registers */ +#define SPIBAR_RESET_LOCK 0xF0 +#define SPIBAR_RESET_CTRL 0xF4 +#define SPIBAR_RESET_DATA 0xF8 + +/* Programmable values of Bit0 (SSL) of Set STRAP MSG LOCK (0xF0) Register */ +#define SPIBAR_RESET_LOCK_DISABLE 0 /* Set_Strap Lock(SSL) Bit 0 = 0 */ +#define SPIBAR_RESET_LOCK_ENABLE 1 /* Set_Strap Lock(SSL) Bit 0 = 1 */ + +/* Programmable values of Bit0(SSMS) of Set STRAP MSG Control (0xF4) Register*/ +#define SPIBAR_RESET_CTRL_SSMC 1 /* Set_Strap Mux Select(SSMS) Bit=1*/ + +#define SPIBAR_HWSEQ_XFER_TIMEOUT 15 /* 15ms*/ + +void *fast_spi_get_bar(void); + +#endif /* SOC_INTEL_COMMON_BLOCK_FAST_SPI_DEF_H */ diff --git a/src/soc/intel/common/block/fast_spi/fast_spi_flash.c b/src/soc/intel/common/block/fast_spi/fast_spi_flash.c new file mode 100644 index 0000000000..3babf914b7 --- /dev/null +++ b/src/soc/intel/common/block/fast_spi/fast_spi_flash.c @@ -0,0 +1,352 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <arch/early_variables.h> +#include <arch/io.h> +#include <console/console.h> +#include <fast_spi_def.h> +#include <intelblocks/fast_spi.h> +#include <soc/intel/common/spi_flash.h> +#include <soc/pci_devs.h> +#include <spi_flash.h> +#include <string.h> +#include <timer.h> + +/* Helper to create a FAST_SPI context on API entry. */ +#define BOILERPLATE_CREATE_CTX(ctx) \ + struct fast_spi_flash_ctx real_ctx; \ + struct fast_spi_flash_ctx *ctx = &real_ctx; \ + _fast_spi_flash_get_ctx(ctx) + +/* + * Anything that's not success is <0. Provided solely for readability, as these + * constants are not used outside this file. + */ +enum errors { + SUCCESS = 0, + E_TIMEOUT = -1, + E_HW_ERROR = -2, + E_ARGUMENT = -3, +}; + +/* Reduce data-passing burden by grouping transaction data in a context. */ +struct fast_spi_flash_ctx { + uintptr_t mmio_base; +}; + +static void _fast_spi_flash_get_ctx(struct fast_spi_flash_ctx *ctx) +{ + ctx->mmio_base = (uintptr_t)fast_spi_get_bar(); +} + +/* Read register from the FAST_SPI flash controller. */ +static uint32_t fast_spi_flash_ctrlr_reg_read(struct fast_spi_flash_ctx *ctx, + uint16_t reg) +{ + uintptr_t addr = ALIGN_DOWN(ctx->mmio_base + reg, sizeof(uint32_t)); + return read32((void *)addr); +} + +/* Write to register in FAST_SPI flash controller. */ +static void fast_spi_flash_ctrlr_reg_write(struct fast_spi_flash_ctx *ctx, + uint16_t reg, uint32_t val) +{ + uintptr_t addr = ALIGN_DOWN(ctx->mmio_base + reg, sizeof(uint32_t)); + write32((void *)addr, val); +} + +/* + * The hardware datasheet is not clear on what HORD values actually do. It + * seems that HORD_SFDP provides access to the first 8 bytes of the SFDP, which + * is the signature and revision fields. HORD_JEDEC provides access to the + * actual flash parameters, and is most likely what you want to use when + * probing the flash from software. + * It's okay to rely on SFDP, since the SPI flash controller requires an SFDP + * 1.5 or newer compliant FAST_SPI flash chip. + * NOTE: Due to the register layout of the hardware, all accesses will be + * aligned to a 4 byte boundary. + */ +static uint32_t fast_spi_flash_read_sfdp_param(struct fast_spi_flash_ctx *ctx, + uint16_t sfdp_reg) +{ + uint32_t ptinx_index = sfdp_reg & SPIBAR_PTINX_IDX_MASK; + fast_spi_flash_ctrlr_reg_write(ctx, SPIBAR_PTINX, + ptinx_index | SPIBAR_PTINX_HORD_JEDEC); + return fast_spi_flash_ctrlr_reg_read(ctx, SPIBAR_PTDATA); +} + +/* Fill FDATAn FIFO in preparation for a write transaction. */ +static void fill_xfer_fifo(struct fast_spi_flash_ctx *ctx, const void *data, + size_t len) +{ + /* YES! memcpy() works. FDATAn does not require 32-bit accesses. */ + memcpy((void *)(ctx->mmio_base + SPIBAR_FDATA(0)), data, len); +} + +/* Drain FDATAn FIFO after a read transaction populates data. */ +static void drain_xfer_fifo(struct fast_spi_flash_ctx *ctx, void *dest, + size_t len) +{ + /* YES! memcpy() works. FDATAn does not require 32-bit accesses. */ + memcpy(dest, (void *)(ctx->mmio_base + SPIBAR_FDATA(0)), len); +} + +/* Fire up a transfer using the hardware sequencer. */ +static void start_hwseq_xfer(struct fast_spi_flash_ctx *ctx, + uint32_t hsfsts_cycle, uint32_t flash_addr, size_t len) +{ + /* Make sure all W1C status bits get cleared. */ + uint32_t hsfsts = SPIBAR_HSFSTS_W1C_BITS; + /* Set up transaction parameters. */ + hsfsts |= hsfsts_cycle & SPIBAR_HSFSTS_FCYCLE_MASK; + hsfsts |= SPIBAR_HSFSTS_FDBC(len - 1); + + fast_spi_flash_ctrlr_reg_write(ctx, SPIBAR_FADDR, flash_addr); + fast_spi_flash_ctrlr_reg_write(ctx, SPIBAR_HSFSTS_CTL, + hsfsts | SPIBAR_HSFSTS_FGO); +} + +static int wait_for_hwseq_xfer(struct fast_spi_flash_ctx *ctx, + uint32_t flash_addr) +{ + struct stopwatch sw; + uint32_t hsfsts; + + stopwatch_init_msecs_expire(&sw, SPIBAR_HWSEQ_XFER_TIMEOUT); + do { + hsfsts = fast_spi_flash_ctrlr_reg_read(ctx, SPIBAR_HSFSTS_CTL); + + if (hsfsts & SPIBAR_HSFSTS_FCERR) { + printk(BIOS_ERR, "SPI Transaction Error at Flash Offset %x HSFSTS = 0x%08x\n", + flash_addr, hsfsts); + return E_HW_ERROR; + } + + if (hsfsts & SPIBAR_HSFSTS_FDONE) + return SUCCESS; + } while (!(stopwatch_expired(&sw))); + + printk(BIOS_ERR, "SPI Transaction Timeout (Exceeded %d ms) at Flash Offset %x HSFSTS = 0x%08x\n", + SPIBAR_HWSEQ_XFER_TIMEOUT, flash_addr, hsfsts); + return E_TIMEOUT; +} + +/* Execute FAST_SPI flash transfer. This is a blocking call. */ +static int exec_sync_hwseq_xfer(struct fast_spi_flash_ctx *ctx, + uint32_t hsfsts_cycle, uint32_t flash_addr, + size_t len) +{ + start_hwseq_xfer(ctx, hsfsts_cycle, flash_addr, len); + return wait_for_hwseq_xfer(ctx, flash_addr); +} + +/* + * Ensure read/write xfer len is not greater than SPIBAR_FDATA_FIFO_SIZE and + * that the operation does not cross 256-byte boundary. + */ +static size_t get_xfer_len(uint32_t addr, size_t len) +{ + size_t xfer_len = min(len, SPIBAR_FDATA_FIFO_SIZE); + size_t bytes_left = ALIGN_UP(addr, 256) - addr; + + if (bytes_left) + xfer_len = min(xfer_len, bytes_left); + + return xfer_len; +} + + +/* Flash device operations. */ +static struct spi_flash boot_flash CAR_GLOBAL; + +static int fast_spi_flash_erase(const struct spi_flash *flash, + uint32_t offset, size_t len) +{ + int ret; + size_t erase_size; + uint32_t erase_cycle; + + BOILERPLATE_CREATE_CTX(ctx); + + if (!IS_ALIGNED(offset, 4 * KiB) || !IS_ALIGNED(len, 4 * KiB)) { + printk(BIOS_ERR, "BUG! SPI erase region not sector aligned\n"); + return E_ARGUMENT; + } + + while (len) { + if (IS_ALIGNED(offset, 64 * KiB) && (len >= 64 * KiB)) { + erase_size = 64 * KiB; + erase_cycle = SPIBAR_HSFSTS_CYCLE_64K_ERASE; + } else { + erase_size = 4 * KiB; + erase_cycle = SPIBAR_HSFSTS_CYCLE_4K_ERASE; + } + printk(BIOS_SPEW, "Erasing flash addr %x + %zu KiB\n", + offset, erase_size / KiB); + + ret = exec_sync_hwseq_xfer(ctx, erase_cycle, offset, 0); + if (ret != SUCCESS) + return ret; + + offset += erase_size; + len -= erase_size; + } + + return SUCCESS; +} + +static int fast_spi_flash_read(const struct spi_flash *flash, + uint32_t addr, size_t len, void *buf) +{ + int ret; + size_t xfer_len; + uint8_t *data = buf; + + BOILERPLATE_CREATE_CTX(ctx); + + while (len) { + xfer_len = get_xfer_len(addr, len); + + ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_READ, + addr, xfer_len); + if (ret != SUCCESS) + return ret; + + drain_xfer_fifo(ctx, data, xfer_len); + + addr += xfer_len; + data += xfer_len; + len -= xfer_len; + } + + return SUCCESS; +} + +static int fast_spi_flash_write(const struct spi_flash *flash, + uint32_t addr, size_t len, const void *buf) +{ + int ret; + size_t xfer_len; + const uint8_t *data = buf; + + BOILERPLATE_CREATE_CTX(ctx); + + while (len) { + xfer_len = get_xfer_len(addr, len); + fill_xfer_fifo(ctx, data, xfer_len); + + ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_WRITE, + addr, xfer_len); + if (ret != SUCCESS) + return ret; + + addr += xfer_len; + data += xfer_len; + len -= xfer_len; + } + + return SUCCESS; +} + +static int fast_spi_flash_status(const struct spi_flash *flash, + uint8_t *reg) +{ + int ret; + BOILERPLATE_CREATE_CTX(ctx); + + ret = exec_sync_hwseq_xfer(ctx, SPIBAR_HSFSTS_CYCLE_RD_STATUS, 0, + sizeof(*reg)); + if (ret != SUCCESS) + return ret; + + drain_xfer_fifo(ctx, reg, sizeof(*reg)); + return ret; +} + +/* + * We can't use FDOC and FDOD to read FLCOMP, as previous platforms did. + * For details see: + * Ch 31, SPI: p. 194 + * The size of the flash component is always taken from density field in the + * SFDP table. FLCOMP.C0DEN is no longer used by the Flash Controller. + */ +struct spi_flash *spi_flash_programmer_probe(struct spi_slave *dev, int force) +{ + BOILERPLATE_CREATE_CTX(ctx); + struct spi_flash *flash; + uint32_t flash_bits; + + flash = car_get_var_ptr(&boot_flash); + + /* + * bytes = (bits + 1) / 8; + * But we need to do the addition in a way which doesn't overflow for + * 4 Gbit devices (flash_bits == 0xffffffff). + */ + flash_bits = fast_spi_flash_read_sfdp_param(ctx, 0x04); + flash->size = (flash_bits >> 3) + 1; + + memcpy(&flash->spi, dev, sizeof(*dev)); + flash->name = "FAST_SPI Hardware Sequencer"; + + /* Can erase both 4 KiB and 64 KiB chunks. Declare the smaller size. */ + flash->sector_size = 4 * KiB; + /* + * FIXME: Get erase+cmd, and status_cmd from SFDP. + * + * flash->erase_cmd = ??? + * flash->status_cmd = ??? + */ + + flash->internal_write = fast_spi_flash_write; + flash->internal_erase = fast_spi_flash_erase; + flash->internal_read = fast_spi_flash_read; + flash->internal_status = fast_spi_flash_status; + + return flash; +} + +int spi_flash_get_fpr_info(struct fpr_info *info) +{ + BOILERPLATE_CREATE_CTX(ctx); + + info->base = ctx->mmio_base + SPIBAR_FPR_BASE; + info->max = SPIBAR_FPR_MAX; + return 0; +} + +/* + * Minimal set of commands to read WPSR from FAST_SPI. + * Returns 0 on success, < 0 on failure. + */ +int fast_spi_flash_read_wpsr(u8 *sr) +{ + uint8_t rdsr; + int ret = 0; + + fast_spi_init(); + + /* sending NULL for spiflash struct parameter since we are not + * calling HWSEQ read_status() call via Probe. + */ + ret = fast_spi_flash_status(NULL, &rdsr); + if (ret) { + printk(BIOS_ERR, "SPI rdsr failed\n"); + return ret; + } + *sr = rdsr & WPSR_MASK_SRP0_BIT; + + return 0; +} diff --git a/src/soc/intel/common/block/include/intelblocks/fast_spi.h b/src/soc/intel/common/block/include/intelblocks/fast_spi.h new file mode 100644 index 0000000000..2b80c49837 --- /dev/null +++ b/src/soc/intel/common/block/include/intelblocks/fast_spi.h @@ -0,0 +1,67 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2017 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BLOCK_FAST_SPI_H +#define SOC_INTEL_COMMON_BLOCK_FAST_SPI_H + +#include <stdint.h> +#include <stddef.h> + +/* + * Disable the BIOS write protect and Enable Prefetching and Caching. + */ +void fast_spi_init(void); +/* + * Minimal set of commands to read WPSR from SPI. + * Returns 0 on success, < 0 on failure. + */ +int fast_spi_flash_read_wpsr(u8 *sr); +/* + * Set FAST_SPIBAR BIOS Control BILD bit. + */ +void fast_spi_set_bios_interface_lock_down(void); +/* + * Set FAST_SPIBAR BIOS Control LE bit. + */ +void fast_spi_set_lock_enable(void); +/* + * Set FAST_SPIBAR BIOS Control EISS bit. + */ +void fast_spi_set_eiss(void); +/* + * Set FAST_SPI opcode menu. + */ +void fast_spi_set_opcode_menu(void); +/* + * Lock FAST_SPIBAR. + */ +void fast_spi_lock_bar(void); +/* + * Set FAST_SPIBAR Soft Reset Data Register value. + */ +void fast_spi_set_strap_msg_data(uint32_t soft_reset_data); +/* + * Returns bios_start and fills in size of the BIOS region. + */ +size_t fast_spi_get_bios_region(size_t *bios_size); +/* + * Program temporary BAR for FAST_SPI in case any of the stages before ramstage + * need to access FAST_SPI MMIO regs. Ramstage will assign a new BAR during PCI + * enumeration. Also, Disable the BIOS write protect and Enable Prefetching and + * Caching. + */ +void fast_spi_early_init(uintptr_t spi_base_address); + +#endif /* SOC_INTEL_COMMON_BLOCK_FAST_SPI_H */ |