diff options
Diffstat (limited to 'src/soc/intel/common/block/include/intelblocks')
| -rw-r--r-- | src/soc/intel/common/block/include/intelblocks/gpio_defs.h | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h index 35f89c9021..0ad3e5c32a 100644 --- a/src/soc/intel/common/block/include/intelblocks/gpio_defs.h +++ b/src/soc/intel/common/block/include/intelblocks/gpio_defs.h @@ -76,7 +76,7 @@ #define PAD_CFG1_PULL_UP_20K (0xc << 10) #define PAD_CFG1_PULL_UP_667 (0xd << 10) #define PAD_CFG1_PULL_NATIVE (0xf << 10) -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY) /* Tx enabled driving last value driven, Rx enabled */ #define PAD_CFG1_IOSSTATE_TxLASTRxE (0x0 << 14) /* Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller @@ -125,7 +125,7 @@ #define PAD_CFG2_DEBOUNCE_MASK 0x1f /* voltage tolerance 0=3.3V default 1=1.8V tolerant */ -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL) #define PAD_CFG1_TOL_MASK (0x1 << 25) #define PAD_CFG1_TOL_1V8 (0x1 << 25) #endif /* CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL */ @@ -134,7 +134,7 @@ #define PAD_RESET(value) PAD_CFG0_LOGICAL_RESET_##value #define PAD_PULL(value) PAD_CFG1_PULL_##value -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY) #define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value #define PAD_IOSTERM(value) PAD_CFG1_IOSTERM_##value #else @@ -147,7 +147,7 @@ PAD_CFG0_TRIG_##trig | \ PAD_CFG0_RX_POL_##inv) -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) #define PAD_IRQ_CFG_DUAL_ROUTE(route1, route2, trig, inv) \ (PAD_CFG0_ROUTE_##route1 | \ PAD_CFG0_ROUTE_##route2 | \ @@ -180,7 +180,7 @@ _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ PAD_IOSSTATE(TxLASTRxE)) -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL) /* Native 1.8V tolerant pad, only applies to some pads like I2C/I2S Not applicable to all SOCs. Refer EDS */ @@ -269,7 +269,7 @@ */ #define PAD_NC(pad, pull) PAD_CFG_GPI(pad, pull, DEEP) -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS) #define PAD_CFG_GPI_APIC(pad, pull, rst) \ _PAD_CFG_STRUCT(pad, \ @@ -384,7 +384,7 @@ PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \ PAD_IOSSTATE(TxDRxE)) -#if IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) +#if CONFIG(SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT) #define PAD_CFG_GPI_DUAL_ROUTE(pad, pull, rst, trig, inv, route1, route2) \ _PAD_CFG_STRUCT(pad, \ PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ |