diff options
Diffstat (limited to 'src/soc/intel/broadwell/spi.c')
| -rw-r--r-- | src/soc/intel/broadwell/spi.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/src/soc/intel/broadwell/spi.c b/src/soc/intel/broadwell/spi.c index 353323a073..935c53215e 100644 --- a/src/soc/intel/broadwell/spi.c +++ b/src/soc/intel/broadwell/spi.c @@ -549,7 +549,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout, /* * This is a 'no data' command (like Write Enable), its - * bitesout size was 1, decremented to zero while executing + * bytesout size was 1, decremented to zero while executing * spi_setup_opcode() above. Tell the chip to send the * command. */ @@ -569,7 +569,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout, } /* - * Check if this is a write command atempting to transfer more bytes + * Check if this is a write command attempting to transfer more bytes * than the controller can handle. Iterations for writes are not * supported here because each SPI write command needs to be preceded * and followed by other SPI commands, and this sequence is controlled @@ -588,7 +588,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout, while (trans.bytesout || trans.bytesin) { uint32_t data_length; - /* SPI addresses are 24 bit only */ + /* SPI addresses are 24 bit only */http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/pentium-n3520-j2850-celeron-n2920-n2820-n2815-n2806-j1850-j1750-datasheet.pdf writel_(trans.offset & 0x00FFFFFF, cntlr.addr); if (trans.bytesout) |