diff options
Diffstat (limited to 'src/soc/intel/broadwell/cpu.c')
| -rw-r--r-- | src/soc/intel/broadwell/cpu.c | 143 |
1 files changed, 142 insertions, 1 deletions
diff --git a/src/soc/intel/broadwell/cpu.c b/src/soc/intel/broadwell/cpu.c index 694c7277a4..72efa3dc81 100644 --- a/src/soc/intel/broadwell/cpu.c +++ b/src/soc/intel/broadwell/cpu.c @@ -15,7 +15,6 @@ #include <cpu/intel/turbo.h> #include <cpu/x86/name.h> #include <delay.h> -#include <intelblocks/cpulib.h> #include <soc/cpu.h> #include <soc/msr.h> #include <soc/pci_devs.h> @@ -25,6 +24,64 @@ #include <soc/intel/broadwell/chip.h> #include <cpu/intel/common/common.h> +/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ +static const u8 power_limit_time_sec_to_msr[] = { + [0] = 0x00, + [1] = 0x0a, + [2] = 0x0b, + [3] = 0x4b, + [4] = 0x0c, + [5] = 0x2c, + [6] = 0x4c, + [7] = 0x6c, + [8] = 0x0d, + [10] = 0x2d, + [12] = 0x4d, + [14] = 0x6d, + [16] = 0x0e, + [20] = 0x2e, + [24] = 0x4e, + [28] = 0x6e, + [32] = 0x0f, + [40] = 0x2f, + [48] = 0x4f, + [56] = 0x6f, + [64] = 0x10, + [80] = 0x30, + [96] = 0x50, + [112] = 0x70, + [128] = 0x11, +}; + +/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ +static const u8 power_limit_time_msr_to_sec[] = { + [0x00] = 0, + [0x0a] = 1, + [0x0b] = 2, + [0x4b] = 3, + [0x0c] = 4, + [0x2c] = 5, + [0x4c] = 6, + [0x6c] = 7, + [0x0d] = 8, + [0x2d] = 10, + [0x4d] = 12, + [0x6d] = 14, + [0x0e] = 16, + [0x2e] = 20, + [0x4e] = 24, + [0x6e] = 28, + [0x0f] = 32, + [0x2f] = 40, + [0x4f] = 48, + [0x6f] = 56, + [0x10] = 64, + [0x30] = 80, + [0x50] = 96, + [0x70] = 112, + [0x11] = 128, +}; + /* The core 100MHz BCLK is disabled in deeper c-states. One needs to calibrate * the 100MHz BCLK against the 24MHz BCLK to restore the clocks properly * when a core is woken up. */ @@ -230,6 +287,90 @@ static void configure_pch_power_sharing(void) RCBA32(PMSYNC_CONFIG2) = pmsync2; } +int cpu_config_tdp_levels(void) +{ + msr_t platform_info; + + /* Bits 34:33 indicate how many levels supported */ + platform_info = rdmsr(MSR_PLATFORM_INFO); + return (platform_info.hi >> 1) & 3; +} + +/* + * Configure processor power limits if possible + * This must be done AFTER set of BIOS_RESET_CPL + */ +void set_power_limits(u8 power_limit_1_time) +{ + msr_t msr = rdmsr(MSR_PLATFORM_INFO); + msr_t limit; + unsigned int power_unit; + unsigned int tdp, min_power, max_power, max_time; + u8 power_limit_1_val; + + if (power_limit_1_time >= ARRAY_SIZE(power_limit_time_sec_to_msr)) + power_limit_1_time = ARRAY_SIZE(power_limit_time_sec_to_msr) - 1; + + if (!(msr.lo & PLATFORM_INFO_SET_TDP)) + return; + + /* Get units */ + msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); + power_unit = 2 << ((msr.lo & 0xf) - 1); + + /* Get power defaults for this SKU */ + msr = rdmsr(MSR_PKG_POWER_SKU); + tdp = msr.lo & 0x7fff; + min_power = (msr.lo >> 16) & 0x7fff; + max_power = msr.hi & 0x7fff; + max_time = (msr.hi >> 16) & 0x7f; + + printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit); + + if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) + power_limit_1_time = power_limit_time_msr_to_sec[max_time]; + + if (min_power > 0 && tdp < min_power) + tdp = min_power; + + if (max_power > 0 && tdp > max_power) + tdp = max_power; + + power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; + + /* Set long term power limit to TDP */ + limit.lo = 0; + limit.lo |= tdp & PKG_POWER_LIMIT_MASK; + limit.lo |= PKG_POWER_LIMIT_EN; + limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << + PKG_POWER_LIMIT_TIME_SHIFT; + + /* Set short term power limit to 1.25 * TDP */ + limit.hi = 0; + limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; + limit.hi |= PKG_POWER_LIMIT_EN; + /* Power limit 2 time is only programmable on server SKU */ + + wrmsr(MSR_PKG_POWER_LIMIT, limit); + + /* Set power limit values in MCHBAR as well */ + MCHBAR32(MCH_PKG_POWER_LIMIT_LO) = limit.lo; + MCHBAR32(MCH_PKG_POWER_LIMIT_HI) = limit.hi; + + /* Set DDR RAPL power limit by copying from MMIO to MSR */ + msr.lo = MCHBAR32(MCH_DDR_POWER_LIMIT_LO); + msr.hi = MCHBAR32(MCH_DDR_POWER_LIMIT_HI); + wrmsr(MSR_DDR_RAPL_LIMIT, msr); + + /* Use nominal TDP values for CPUs with configurable TDP */ + if (cpu_config_tdp_levels()) { + msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); + limit.hi = 0; + limit.lo = msr.lo & 0xff; + wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit); + } +} + static void configure_c_states(void) { msr_t msr; |