diff options
Diffstat (limited to 'src/soc/intel/apollolake')
| -rw-r--r-- | src/soc/intel/apollolake/Kconfig | 3 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/Makefile.inc | 8 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/acpi/gpio.asl | 35 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/acpi/gpiolib.asl | 2 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/chip.h | 1 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/gpio.c | 421 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/gpio_apl.c | 115 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/gpio.h | 175 | ||||
| -rw-r--r-- | src/soc/intel/apollolake/include/soc/gpio_apl.h (renamed from src/soc/intel/apollolake/include/soc/gpio_defs.h) | 119 |
9 files changed, 170 insertions, 709 deletions
diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index 23e514901b..68291e5a28 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -57,6 +57,9 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_BLOCK select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_FAST_SPI + select SOC_INTEL_COMMON_BLOCK_GPIO + select SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG + select SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY select SOC_INTEL_COMMON_BLOCK_ITSS select SOC_INTEL_COMMON_BLOCK_I2C select SOC_INTEL_COMMON_BLOCK_LPSS diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc index fe55ae9b5e..bf445e5628 100644 --- a/src/soc/intel/apollolake/Makefile.inc +++ b/src/soc/intel/apollolake/Makefile.inc @@ -11,7 +11,7 @@ subdirs-y += ../../../cpu/x86/cache bootblock-y += bootblock/bootblock.c bootblock-y += bootblock/bootblock.c bootblock-y += car.c -bootblock-y += gpio.c +bootblock-y += gpio_apl.c bootblock-y += heci.c bootblock-y += i2c.c bootblock-y += lpc_lib.c @@ -23,7 +23,7 @@ bootblock-$(CONFIG_FSP_CAR) += bootblock/cache_as_ram_fsp.S romstage-y += car.c romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c -romstage-y += gpio.c +romstage-y += gpio_apl.c romstage-y += heci.c romstage-y += i2c.c romstage-$(CONFIG_SOC_UART_DEBUG) += uart_early.c @@ -37,7 +37,7 @@ romstage-y += spi.c smm-y += mmap_boot.c smm-y += pmutil.c -smm-y += gpio.c +smm-y += gpio_apl.c smm-y += smihandler.c smm-y += spi.c smm-y += uart_early.c @@ -48,7 +48,7 @@ ramstage-y += chip.c ramstage-y += cse.c ramstage-y += elog.c ramstage-y += dsp.c -ramstage-y += gpio.c +ramstage-y += gpio_apl.c ramstage-y += graphics.c ramstage-y += heci.c ramstage-y += i2c.c diff --git a/src/soc/intel/apollolake/acpi/gpio.asl b/src/soc/intel/apollolake/acpi/gpio.asl index ceba72b559..b9a2cf1b97 100644 --- a/src/soc/intel/apollolake/acpi/gpio.asl +++ b/src/soc/intel/apollolake/acpi/gpio.asl @@ -14,7 +14,8 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <soc/gpio_defs.h> +#include <soc/gpio.h> +#include <intelblocks/pcr.h> #include <soc/pcr_ids.h> #include "gpiolib.asl" @@ -23,9 +24,9 @@ scope (\_SB) { Device (GPO0) { Name (_ADR, 0) - Name (_HID, "INT3452") - Name (_CID, "INT3452") - Name (_DDN, "General Purpose Input/Output (GPIO) Controller - North" ) + Name (_HID, GPIO_COMM_NAME) + Name (_CID, GPIO_COMM_NAME) + Name (_DDN, GPIO_COMM_0_DESC) Name (_UID, 1) Name (RBUF, ResourceTemplate () @@ -40,7 +41,7 @@ scope (\_SB) { Method (_CRS, 0x0, NotSerialized) { CreateDwordField (^RBUF, ^RMEM._BAS, RBAS) - ShiftLeft (PID_GPIO_N, PCR_PORTID_SHIFT, Local0) + ShiftLeft (GPIO_COMM0_PID, PCR_PORTID_SHIFT, Local0) Or (CONFIG_PCR_BASE_ADDRESS, Local0, RBAS) Return (^RBUF) } @@ -54,9 +55,9 @@ scope (\_SB) { Device (GPO1) { Name (_ADR, 0) - Name (_HID, "INT3452") - Name (_CID, "INT3452") - Name (_DDN, "General Purpose Input/Output (GPIO) Controller - Northwest" ) + Name (_HID, GPIO_COMM_NAME) + Name (_CID, GPIO_COMM_NAME) + Name (_DDN, GPIO_COMM_1_DESC) Name (_UID, 2) Name (RBUF, ResourceTemplate () @@ -71,7 +72,7 @@ scope (\_SB) { Method (_CRS, 0x0, NotSerialized) { CreateDwordField (^RBUF, ^RMEM._BAS, RBAS) - ShiftLeft (PID_GPIO_NW, PCR_PORTID_SHIFT, Local0) + ShiftLeft (GPIO_COMM1_PID, PCR_PORTID_SHIFT, Local0) Or (CONFIG_PCR_BASE_ADDRESS, Local0, RBAS) Return (^RBUF) } @@ -85,9 +86,9 @@ scope (\_SB) { Device (GPO2) { Name (_ADR, 0) - Name (_HID, "INT3452") - Name (_CID, "INT3452") - Name (_DDN, "General Purpose Input/Output (GPIO) Controller - West" ) + Name (_HID, GPIO_COMM_NAME) + Name (_CID, GPIO_COMM_NAME) + Name (_DDN, GPIO_COMM_2_DESC) Name (_UID, 3) Name (RBUF, ResourceTemplate () @@ -102,7 +103,7 @@ scope (\_SB) { Method (_CRS, 0x0, NotSerialized) { CreateDwordField (^RBUF, ^RMEM._BAS, RBAS) - ShiftLeft (PID_GPIO_W, PCR_PORTID_SHIFT, Local0) + ShiftLeft (GPIO_COMM2_PID, PCR_PORTID_SHIFT, Local0) Or (CONFIG_PCR_BASE_ADDRESS, Local0, RBAS) Return (^RBUF) } @@ -116,9 +117,9 @@ scope (\_SB) { Device (GPO3) { Name (_ADR, 0) - Name (_HID, "INT3452") - Name (_CID, "INT3452") - Name (_DDN, "General Purpose Input/Output (GPIO) Controller - Southwest" ) + Name (_HID, GPIO_COMM_NAME) + Name (_CID, GPIO_COMM_NAME) + Name (_DDN, GPIO_COMM_3_DESC) Name (_UID, 4) Name (RBUF, ResourceTemplate () @@ -133,7 +134,7 @@ scope (\_SB) { Method (_CRS, 0x0, NotSerialized) { CreateDwordField (^RBUF, ^RMEM._BAS, RBAS) - ShiftLeft (PID_GPIO_SW, PCR_PORTID_SHIFT, Local0) + ShiftLeft (GPIO_COMM3_PID, PCR_PORTID_SHIFT, Local0) Or (CONFIG_PCR_BASE_ADDRESS, Local0, RBAS) Return (^RBUF) } diff --git a/src/soc/intel/apollolake/acpi/gpiolib.asl b/src/soc/intel/apollolake/acpi/gpiolib.asl index a4d4b00cf6..3e99f0966f 100644 --- a/src/soc/intel/apollolake/acpi/gpiolib.asl +++ b/src/soc/intel/apollolake/acpi/gpiolib.asl @@ -81,7 +81,7 @@ Scope (\_SB) Method (CHSA, 0x1, Serialized) { /* Arg0 - GPIO pad offset relative to the community */ - Add (HOSTSW_OWN_REG_BASE, Multiply (Divide (Arg0, 32), 4), Local1) + Add (HOSTSW_OWN_REG_0, Multiply (Divide (Arg0, 32), 4), Local1) Return (Local1) } diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h index bf25009f86..93bb5a1c40 100644 --- a/src/soc/intel/apollolake/chip.h +++ b/src/soc/intel/apollolake/chip.h @@ -19,7 +19,6 @@ #define _SOC_APOLLOLAKE_CHIP_H_ #include <soc/gpe.h> -#include <soc/gpio_defs.h> #include <soc/gpio.h> #include <intelblocks/lpss_i2c.h> #include <device/i2c.h> diff --git a/src/soc/intel/apollolake/gpio.c b/src/soc/intel/apollolake/gpio.c deleted file mode 100644 index c2375062f7..0000000000 --- a/src/soc/intel/apollolake/gpio.c +++ /dev/null @@ -1,421 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2015 Intel Corp. - * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <assert.h> -#include <gpio.h> -#include <intelblocks/itss.h> -#include <intelblocks/pcr.h> -#include <soc/gpio.h> -#include <soc/pcr_ids.h> -#include <soc/pm.h> - -/* This list must be in order, from highest pad numbers, to lowest pad numbers*/ -static const struct pad_community { - uint16_t first_pad; - uint8_t port; - uint8_t num_gpi_regs; - uint8_t gpi_offset; - const char *grp_name; -} gpio_communities[] = { - { - .port = PID_GPIO_SW, - .first_pad = SW_OFFSET, - .num_gpi_regs = NUM_SW_GPI_REGS, - .gpi_offset = 0, - .grp_name = "GPIO_GPE_SW", - }, { - .port = PID_GPIO_W, - .first_pad = W_OFFSET, - .num_gpi_regs = NUM_W_GPI_REGS, - .gpi_offset = NUM_SW_GPI_REGS, - .grp_name = "GPIO_GPE_W", - }, { - .port = PID_GPIO_NW, - .first_pad = NW_OFFSET, - .num_gpi_regs = NUM_NW_GPI_REGS, - .gpi_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS, - .grp_name = "GPIO_GPE_NW", - }, { - .port = PID_GPIO_N, - .first_pad = N_OFFSET, - .num_gpi_regs = NUM_N_GPI_REGS, - .gpi_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS - + NUM_SW_GPI_REGS, - .grp_name = "GPIO_GPE_N", - } -}; - -static const struct pad_community *gpio_get_community(uint16_t pad) -{ - const struct pad_community *map = gpio_communities; - - assert(pad < TOTAL_PADS); - - while (map->first_pad > pad) - map++; - - return map; -} - -static void gpio_configure_itss(const struct pad_config *cfg, - uint16_t port, uint16_t pad_cfg_offset) -{ - /* No ITSS configuration in SMM. */ - if (ENV_SMM) - return; - - int irq; - - /* Set up ITSS polarity if pad is routed to APIC. - * - * The ITSS takes only active high interrupt signals. Therefore, - * if the pad configuration indicates an inversion assume the - * intent is for the ITSS polarity. Before forwarding on the - * request to the APIC there's an inversion setting for how the - * signal is forwarded to the APIC. Honor the inversion setting - * in the GPIO pad configuration so that a hardware active low - * signal looks that way to the APIC (double inversion). - */ - if (!(cfg->config0 & PAD_CFG0_ROUTE_IOAPIC)) - return; - - irq = pcr_read32(port, pad_cfg_offset + sizeof(uint32_t)); - irq &= PAD_CFG1_IRQ_MASK; - if (!irq) { - printk(BIOS_ERR, "GPIO %u doesn't support APIC routing,\n", - cfg->pad); - return; - } - - itss_set_irq_polarity(irq, !!(cfg->config0 & PAD_CFG0_RX_POL_INVERT)); -} - -static void gpio_configure_owner(const struct pad_config *cfg, - uint16_t port, int pin) -{ - uint16_t hostsw_reg; - - /* The 4th bit in pad_config 1 (RO) is used to indicate if the pad - * needs GPIO driver ownership. - */ - if (!(cfg->config1 & PAD_CFG1_GPIO_DRIVER)) - return; - - /* Based on the gpio pin number configure the corresponding bit in - * HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership. - */ - hostsw_reg = HOSTSW_OWN_REG_BASE + ((pin / 32) * sizeof(uint32_t)); - pcr_or32(port, hostsw_reg, (1 << (pin % 32))); -} - -static void gpi_enable_smi(const struct pad_config *cfg, uint16_t port, int pin) -{ - uint32_t value; - uint16_t sts_reg; - uint16_t en_reg; - int group; - - if (((cfg->config0) & PAD_CFG0_ROUTE_SMI) != PAD_CFG0_ROUTE_SMI) - return; - - group = pin / GPIO_MAX_NUM_PER_GROUP; - - sts_reg = GPI_SMI_STS_OFFSET(group); - value = pcr_read32(port, sts_reg); - /* Write back 1 to reset the sts bits */ - pcr_write32(port, sts_reg, value); - - /* Set enable bits */ - en_reg = GPI_SMI_EN_OFFSET(group); - pcr_or32(port, en_reg, (1 << (pin % GPIO_MAX_NUM_PER_GROUP))); -} - -void gpio_configure_pad(const struct pad_config *cfg) -{ - uint32_t dw1; - const struct pad_community *comm = gpio_get_community(cfg->pad); - uint16_t config_offset = PAD_CFG_OFFSET(cfg->pad - comm->first_pad); - - /* Iostandby bits are tentatively stored in [3:0] bits (RO) of config1. - * dw1 is used to extract the bits of Iostandby. - * This is done to preserve config1 size as unit16 in gpio.h. - */ - dw1 = cfg->config1 & ~PAD_CFG1_IOSSTATE_MASK; - dw1 |= (cfg->config1 & PAD_CFG1_IOSSTATE_MASK) - << PAD_CFG1_IOSSTATE_SHIFT; - - pcr_write32(comm->port, config_offset, cfg->config0); - pcr_write32(comm->port, config_offset + sizeof(uint32_t), dw1); - - gpio_configure_itss(cfg, comm->port, config_offset); - gpio_configure_owner(cfg, comm->port, cfg->pad - comm->first_pad); - - gpi_enable_smi(cfg, comm->port, cfg->pad - comm->first_pad); -} - -void gpio_configure_pads(const struct pad_config *cfg, size_t num_pads) -{ - uint32_t i; - - for (i = 0; i < num_pads; i++) - gpio_configure_pad(cfg + i); -} - -void *gpio_dwx_address(const uint16_t pad) -{ - /* Calculate Address of DW0 register for given GPIO - * pad - GPIO number - * returns - address of GPIO - */ - const struct pad_community *comm = gpio_get_community(pad); - return pcr_reg_address(comm->port, - PAD_CFG_OFFSET(pad - comm->first_pad)); -} - -uint8_t gpio_get_pad_portid(const uint16_t pad) -{ - /* Get the port id of given pad - * pad - GPIO number - * returns - given pad port id - */ - const struct pad_community *comm = gpio_get_community(pad); - return comm->port; -} - -void gpio_input_pulldown(gpio_t gpio) -{ - struct pad_config cfg = PAD_CFG_GPI(gpio, DN_20K, DEEP); - gpio_configure_pad(&cfg); -} - -void gpio_input_pullup(gpio_t gpio) -{ - struct pad_config cfg = PAD_CFG_GPI(gpio, UP_20K, DEEP); - gpio_configure_pad(&cfg); -} - -void gpio_input(gpio_t gpio) -{ - struct pad_config cfg = PAD_CFG_GPI(gpio, NONE, DEEP); - gpio_configure_pad(&cfg); -} - -void gpio_output(gpio_t gpio, int value) -{ - struct pad_config cfg = PAD_CFG_GPO(gpio, value, DEEP); - gpio_configure_pad(&cfg); -} - -int gpio_get(gpio_t gpio_num) -{ - uint32_t reg; - const struct pad_community *comm = gpio_get_community(gpio_num); - uint16_t config_offset = PAD_CFG_OFFSET(gpio_num - comm->first_pad); - - reg = pcr_read32(comm->port, config_offset); - - return !!(reg & PAD_CFG0_RX_STATE); -} - -void gpio_set(gpio_t gpio_num, int value) -{ - const struct pad_community *comm = gpio_get_community(gpio_num); - uint16_t config_offset = PAD_CFG_OFFSET(gpio_num - comm->first_pad); - - pcr_rmw32(comm->port, config_offset, - ~PAD_CFG0_TX_STATE, (!!value & PAD_CFG0_TX_STATE)); -} - -const char *gpio_acpi_path(gpio_t gpio_num) -{ - const struct pad_community *comm = gpio_get_community(gpio_num); - - switch (comm->port) { - case PID_GPIO_N: - return "\\_SB.GPO0"; - case PID_GPIO_NW: - return "\\_SB.GPO1"; - case PID_GPIO_W: - return "\\_SB.GPO2"; - case PID_GPIO_SW: - return "\\_SB.GPO3"; - } - - return NULL; -} - -uint16_t gpio_acpi_pin(gpio_t gpio_num) -{ - const struct pad_community *comm = gpio_get_community(gpio_num); - - switch (comm->port) { - case PID_GPIO_N: - return PAD_N(gpio_num); - case PID_GPIO_NW: - return PAD_NW(gpio_num); - case PID_GPIO_W: - return PAD_W(gpio_num); - case PID_GPIO_SW: - return PAD_SW(gpio_num); - } - - return gpio_num; -} - -static void print_gpi_status(const struct gpi_status *sts) -{ - int i; - int group; - int index = 0; - int bit_set; - int num_groups; - int abs_bit; - const struct pad_community *comm; - - for (i = 0; i < ARRAY_SIZE(gpio_communities); i++) { - comm = &gpio_communities[i]; - num_groups = comm->num_gpi_regs; - index = comm->gpi_offset; - for (group = 0; group < num_groups; group++, index++) { - for (bit_set = 31; bit_set >= 0; bit_set--) { - if (!(sts->grp[index] & (1 << bit_set))) - continue; - - abs_bit = bit_set; - abs_bit += group * GPIO_MAX_NUM_PER_GROUP; - printk(BIOS_DEBUG, "%s %d\n", comm->grp_name, - abs_bit); - } - } - } -} - -void gpi_clear_get_smi_status(struct gpi_status *sts) -{ - int i; - int group; - int index = 0; - uint32_t sts_value; - uint32_t en_value; - int num_groups; - const struct pad_community *comm; - - for (i = 0; i < ARRAY_SIZE(gpio_communities); i++) { - comm = &gpio_communities[i]; - num_groups = comm->num_gpi_regs; - index = comm->gpi_offset; - for (group = 0; group < num_groups; group++, index++) { - sts_value = pcr_read32(gpio_communities[i].port, - GPI_SMI_STS_OFFSET(group)); - en_value = pcr_read32(gpio_communities[i].port, - GPI_SMI_EN_OFFSET(group)); - sts->grp[index] = sts_value & en_value; - /* Clear the set status bits. */ - pcr_write32(gpio_communities[i].port, - GPI_SMI_STS_OFFSET(group), sts->grp[index]); - } - } - - if (IS_ENABLED(CONFIG_DEBUG_SMI)) - print_gpi_status(sts); - -} - -int gpi_status_get(const struct gpi_status *sts, gpio_t gpi) -{ - uint8_t sts_index; - const struct pad_community *comm = gpio_get_community(gpi); - - /* Check if valid gpi */ - if (comm == NULL) - return 0; - - sts_index = comm->gpi_offset + ((gpi - comm->first_pad) / - GPIO_MAX_NUM_PER_GROUP); - - return !!(sts->grp[sts_index] & (1 << (gpi % GPIO_MAX_NUM_PER_GROUP))); -} - -/* Helper function to map PMC register groups to tier1 sci groups */ -static int pmc_gpe_route_to_gpio(int route) -{ - switch (route) { - case PMC_GPE_SW_31_0: - return GPIO_GPE_SW_31_0; - case PMC_GPE_SW_63_32: - return GPIO_GPE_SW_63_32; - case PMC_GPE_NW_31_0: - return GPIO_GPE_NW_31_0; - case PMC_GPE_NW_63_32: - return GPIO_GPE_NW_63_32; - case PMC_GPE_NW_95_64: - return GPIO_GPE_NW_95_64; - case PMC_GPE_N_31_0: - return GPIO_GPE_N_31_0; - case PMC_GPE_N_63_32: - return GPIO_GPE_N_63_32; - case PMC_GPE_W_31_0: - return GPIO_GPE_W_31_0; - default: - return -1; - } -} - -void gpio_route_gpe(uint8_t gpe0b, uint8_t gpe0c, uint8_t gpe0d) -{ - int i; - uint32_t misccfg_mask; - uint32_t misccfg_value; - int ret; - - /* Get the group here for community specific MISCCFG register. - * If any of these returns -1 then there is some error in devicetree - * where the group is probably hardcoded and does not comply with the - * PMC group defines. So we return from here and MISCFG is set to - * default. - */ - ret = pmc_gpe_route_to_gpio(gpe0b); - if (ret == -1) - return; - gpe0b = ret; - - ret = pmc_gpe_route_to_gpio(gpe0c); - if (ret == -1) - return; - gpe0c = ret; - - ret = pmc_gpe_route_to_gpio(gpe0d); - if (ret == -1) - return; - gpe0d = ret; - - misccfg_value = gpe0b << MISCCFG_GPE0_DW0_SHIFT; - misccfg_value |= gpe0c << MISCCFG_GPE0_DW1_SHIFT; - misccfg_value |= gpe0d << MISCCFG_GPE0_DW2_SHIFT; - - /* Program GPIO_MISCCFG */ - misccfg_mask = ~(MISCCFG_GPE0_DW2_MASK | - MISCCFG_GPE0_DW1_MASK | - MISCCFG_GPE0_DW0_MASK); - - for (i = 0; i < ARRAY_SIZE(gpio_communities); i++) { - const struct pad_community *comm = &gpio_communities[i]; - - pcr_rmw32(comm->port, GPIO_MISCCFG, - misccfg_mask, misccfg_value); - } -} diff --git a/src/soc/intel/apollolake/gpio_apl.c b/src/soc/intel/apollolake/gpio_apl.c new file mode 100644 index 0000000000..d7d3fe01f2 --- /dev/null +++ b/src/soc/intel/apollolake/gpio_apl.c @@ -0,0 +1,115 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2015 - 2017 Intel Corp. + * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <assert.h> +#include <intelblocks/gpio.h> +#include <intelblocks/pcr.h> +#include <soc/pcr_ids.h> +#include <soc/pm.h> + +static const struct reset_mapping rst_map[] = { + { PAD_CFG0_RESET_PWROK, PAD_CFG0_RESET_PWROK }, + { PAD_CFG0_RESET_DEEP, PAD_CFG0_RESET_DEEP }, + { PAD_CFG0_RESET_PLTRST, PAD_CFG0_RESET_PLTRST }, +}; + +static const struct pad_community apl_gpio_communities[] = { + { + .port = PID_GPIO_SW, + .first_pad = SW_OFFSET, + .last_pad = LPC_FRAMEB, + .num_gpi_regs = NUM_SW_GPI_REGS, + .gpi_status_offset = 0, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_SW", + .acpi_path = "\\_SB.GPO3", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + }, { + .port = PID_GPIO_W, + .first_pad = W_OFFSET, + .last_pad = SUSPWRDNACK, + .num_gpi_regs = NUM_W_GPI_REGS, + .gpi_status_offset = NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_W", + .acpi_path = "\\_SB.GPO2", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + }, { + .port = PID_GPIO_NW, + .first_pad = NW_OFFSET, + .last_pad = GPIO_123, + .num_gpi_regs = NUM_NW_GPI_REGS, + .gpi_status_offset = NUM_W_GPI_REGS + NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_NW", + .acpi_path = "\\_SB.GPO1", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + }, { + .port = PID_GPIO_N, + .first_pad = N_OFFSET, + .last_pad = SVID0_CLK, + .num_gpi_regs = NUM_N_GPI_REGS, + .gpi_status_offset = NUM_NW_GPI_REGS + NUM_W_GPI_REGS + + NUM_SW_GPI_REGS, + .pad_cfg_base = PAD_CFG_BASE, + .host_own_reg_0 = HOSTSW_OWN_REG_0, + .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, + .gpi_smi_en_reg_0 = GPI_SMI_EN_0, + .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, + .name = "GPIO_GPE_N", + .acpi_path = "\\_SB.GPO0", + .reset_map = rst_map, + .num_reset_vals = ARRAY_SIZE(rst_map), + } +}; + +const struct pad_community *soc_gpio_get_community(size_t *num_communities) +{ + *num_communities = ARRAY_SIZE(apl_gpio_communities); + return apl_gpio_communities; +} + +const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num) +{ + static const struct pmc_to_gpio_route routes[] = { + { PMC_GPE_SW_31_0, GPIO_GPE_SW_31_0 }, + { PMC_GPE_SW_63_32, GPIO_GPE_SW_63_32 }, + { PMC_GPE_NW_31_0, GPIO_GPE_NW_31_0 }, + { PMC_GPE_NW_63_32, GPIO_GPE_NW_63_32 }, + { PMC_GPE_NW_95_64, GPIO_GPE_NW_95_64 }, + { PMC_GPE_N_31_0, GPIO_GPE_N_31_0 }, + { PMC_GPE_N_63_32, GPIO_GPE_N_63_32 }, + { PMC_GPE_W_31_0, GPIO_GPE_W_31_0 }, + }; + *num = ARRAY_SIZE(routes); + return routes; +} diff --git a/src/soc/intel/apollolake/include/soc/gpio.h b/src/soc/intel/apollolake/include/soc/gpio.h index 85fc759bcd..a4d766beba 100644 --- a/src/soc/intel/apollolake/include/soc/gpio.h +++ b/src/soc/intel/apollolake/include/soc/gpio.h @@ -1,8 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2015 Intel Corp. - * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.) + * Copyright (C) 2017 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,170 +14,10 @@ * GNU General Public License for more details. */ -#ifndef _SOC_APOLLOLAKE_GPIO_H_ -#define _SOC_APOLLOLAKE_GPIO_H_ +#ifndef _SOC_APL_GPIO_H_ +#define _SOC_APL_GPIO_H_ -#include <soc/gpio_defs.h> -/* __ACPI__ guard is needed to ignore below code in ACPI/ASL compilation */ -#ifndef __ACPI__ -#include <types.h> - -typedef uint32_t gpio_t; - -/* - * Structure to represent GPI status for GPE and SMI. Use helper - * functions for interrogating particular GPIs. Here the number of - * array elements is total number of groups that can be present in all - * the communities. - */ -struct gpi_status { - uint32_t grp[NUM_GPI_STATUS_REGS]; -}; - -/* - * Clear GPI SMI status and fill in the structure representing enabled - * and set status. - */ -void gpi_clear_get_smi_status(struct gpi_status *sts); - -/* Return 1 if gpio is set in the gpi_status struct. Otherwise 0. */ -int gpi_status_get(const struct gpi_status *sts, gpio_t gpi); - -#define PAD_FUNC(value) PAD_CFG0_MODE_##value -#define PAD_RESET(value) PAD_CFG0_RESET_##value -#define PAD_PULL(value) PAD_CFG1_PULL_##value -#define PAD_IOSSTATE(value) PAD_CFG1_IOSSTATE_##value -#define PAD_IOSTERM(value) PAD_CFG1_IOSTERM_##value -#define PAD_IRQ_CFG(route, trig, inv) \ - (PAD_CFG0_ROUTE_##route | \ - PAD_CFG0_TRIG_##trig | \ - (PAD_CFG0_RX_POL_##inv)) - -#define _PAD_CFG_STRUCT(__pad, __config0, __config1) \ - { \ - .pad = __pad, \ - .config0 = __config0, \ - .config1 = __config1, \ - } - -/* Native function configuration */ -#define PAD_CFG_NF(pad, pull, rst, func) \ - PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, TxLASTRxE) - -/* Native function configuration for standby state */ -#define PAD_CFG_NF_IOSSTATE(pad, pull, rst, func, iosstate) \ - PAD_CFG_NF_IOSSTATE_IOSTERM(pad,pull, rst, func, iosstate, SAME) - -#define PAD_CFG_NF_IOSSTATE_IOSTERM(pad, pull, rst, func, iosstate, iosterm) \ - _PAD_CFG_STRUCT(pad, PAD_RESET(rst) | PAD_FUNC(func), PAD_PULL(pull) | \ - PAD_IOSSTATE(iosstate) | PAD_IOSTERM(iosterm)) - -/* General purpose output, no pullup/down. */ -#define PAD_CFG_GPO(pad, val, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_RX_DISABLE | !!val, \ - PAD_PULL(NONE) | PAD_IOSSTATE(TxLASTRxE)) - -/* General purpose input */ -#define PAD_CFG_GPI(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ - PAD_PULL(pull) | PAD_IOSSTATE(TxLASTRxE)) - -/* General purpose input. The following macro sets the - * Host Software Pad Ownership to GPIO Driver mode. - */ -#define PAD_CFG_GPI_GPIO_DRIVER(pad, pull, rst) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE, \ - PAD_PULL(pull) | PAD_CFG1_GPIO_DRIVER | PAD_IOSSTATE(TxLASTRxE)) - -/* No Connect configuration for unused pad. - * NC should be GPI with Term as PU20K, PD20K, NONE depending upon default Term - */ -#define PAD_NC(pad, pull) PAD_CFG_GPI(pad, pull, DEEP) - -/* General purpose input, routed to APIC */ -#define PAD_CFG_GPI_APIC(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ - PAD_IRQ_CFG(IOAPIC, trig, inv), PAD_PULL(pull) | \ - PAD_IOSSTATE(TxLASTRxE)) - -/* - * The following APIC macros assume the APIC will handle the filtering - * on its own end. One just needs to pass an active high message into the - * ITSS. - */ -#define PAD_CFG_GPI_APIC_LOW(pad, pull, rst) \ - PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, INVERT) - -#define PAD_CFG_GPI_APIC_HIGH(pad, pull, rst) \ - PAD_CFG_GPI_APIC(pad, pull, rst, LEVEL, NONE) - -/* General purpose input, routed to SMI */ -#define PAD_CFG_GPI_SMI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ - PAD_IRQ_CFG(SMI, trig, inv), PAD_PULL(pull) | \ - PAD_IOSSTATE(TxLASTRxE)) - -#define PAD_CFG_GPI_SMI_LOW(pad, pull, rst, trig) \ - PAD_CFG_GPI_SMI(pad, pull, rst, trig, INVERT) - -#define PAD_CFG_GPI_SMI_HIGH(pad, pull, rst, trig) \ - PAD_CFG_GPI_SMI(pad, pull, rst, trig, NONE) - -/* General purpose input, routed to SCI */ -#define PAD_CFG_GPI_SCI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ - PAD_IRQ_CFG(SCI, trig, inv), PAD_PULL(pull) | \ - PAD_IOSSTATE(TxLASTRxE)) - -#define PAD_CFG_GPI_SCI_LOW(pad, pull, rst, trig) \ - PAD_CFG_GPI_SCI(pad, pull, rst, trig, INVERT) - -#define PAD_CFG_GPI_SCI_HIGH(pad, pull, rst, trig) \ - PAD_CFG_GPI_SCI(pad, pull, rst, trig, NONE) - -/* General purpose input, routed to NMI */ -#define PAD_CFG_GPI_NMI(pad, pull, rst, trig, inv) \ - _PAD_CFG_STRUCT(pad, \ - PAD_FUNC(GPIO) | PAD_RESET(rst) | PAD_CFG0_TX_DISABLE | \ - PAD_IRQ_CFG(NMI, trig, inv), PAD_PULL(pull) | \ - PAD_IOSSTATE(TxLASTRxE)) - -struct pad_config { - uint32_t config0; - uint16_t config1; - uint16_t pad; -}; - -/* - * Configuration for raw pads. Some pads are designated as only special function - * pins, and don't have an associated GPIO number, so we need to expose the raw - * pad configuration functionality. - */ -void gpio_configure_pad(const struct pad_config *cfg); -void gpio_configure_pads(const struct pad_config *cfg, size_t num_pads); - -/* Calculate GPIO DW0 address */ -void *gpio_dwx_address(const uint16_t pad); - -/* Get the port id of given pad */ -uint8_t gpio_get_pad_portid(const uint16_t pad); - -/* - * Set the GPIO groups for the GPE blocks. The values from PMC register GPE_CFG - * are passed which is then mapped to proper groups for MISCCFG. This basically - * sets the MISCCFG register bits: - * dw0 = gpe0_route[11:8]. This is ACPI GPE0b. - * dw1 = gpe0_route[15:12]. This is ACPI GPE0c. - * dw2 = gpe0_route[19:16]. This is ACPI GPE0d. - */ -void gpio_route_gpe(uint8_t gpe0b, uint8_t gpe0c, uint8_t gpe0d); - -#endif /* __ACPI__ */ - -#endif /* _SOC_APOLLOLAKE_GPIO_H_ */ +#include <soc/gpio_apl.h> +#include <intelblocks/gpio.h> /* intelblocks/gpio.h depends on definitions in + soc/gpio_apl.h */ +#endif diff --git a/src/soc/intel/apollolake/include/soc/gpio_defs.h b/src/soc/intel/apollolake/include/soc/gpio_apl.h index 938d4148f1..67c8a756b6 100644 --- a/src/soc/intel/apollolake/include/soc/gpio_defs.h +++ b/src/soc/intel/apollolake/include/soc/gpio_apl.h @@ -6,7 +6,7 @@ * * This file is part of the coreboot project. * - * Copyright (C) 2015 Intel Corp. + * Copyright (C) 2015 - 2017 Intel Corp. * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.) * * This program is free software; you can redistribute it and/or modify @@ -20,8 +20,8 @@ * GNU General Public License for more details. */ -#ifndef _SOC_APOLLOLAKE_GPIO_DEFS_H_ -#define _SOC_APOLLOLAKE_GPIO_DEFS_H_ +#ifndef _SOC_APOLLOLAKE_GPIO_H_ +#define _SOC_APOLLOLAKE_GPIO_H_ /* * Miscellaneous Configuration register(MISCCFG).These are community specific @@ -40,103 +40,19 @@ #define GPIO_MAX_NUM_PER_GROUP 32 -#define MISCCFG_GPE0_DW0_SHIFT 8 -#define MISCCFG_GPE0_DW0_MASK (0xf << MISCCFG_GPE0_DW0_SHIFT) -#define MISCCFG_GPE0_DW1_SHIFT 12 -#define MISCCFG_GPE0_DW1_MASK (0xf << MISCCFG_GPE0_DW1_SHIFT) -#define MISCCFG_GPE0_DW2_SHIFT 16 -#define MISCCFG_GPE0_DW2_MASK (0xf << MISCCFG_GPE0_DW2_SHIFT) /* Host Software Pad Ownership Register. * The pins in the community are divided into 3 groups : * GPIO 0 ~ 31, GPIO 32 ~ 63, GPIO 64 ~ 95 */ -#define HOSTSW_OWN_REG_BASE 0x80 - -#define PAD_CFG0_TX_STATE (1 << 0) -#define PAD_CFG0_RX_STATE (1 << 1) -#define PAD_CFG0_TX_DISABLE (1 << 8) -#define PAD_CFG0_RX_DISABLE (1 << 9) -#define PAD_CFG0_MODE_MASK (7 << 10) -#define PAD_CFG0_MODE_GPIO (0 << 10) -#define PAD_CFG0_MODE_FUNC(x) ((x) << 10) -#define PAD_CFG0_MODE_NF1 (1 << 10) -#define PAD_CFG0_MODE_NF2 (2 << 10) -#define PAD_CFG0_MODE_NF3 (3 << 10) -#define PAD_CFG0_MODE_NF4 (4 << 10) -#define PAD_CFG0_MODE_NF5 (5 << 10) -#define PAD_CFG0_ROUTE_NMI (1 << 17) -#define PAD_CFG0_ROUTE_SMI (1 << 18) -#define PAD_CFG0_ROUTE_SCI (1 << 19) -#define PAD_CFG0_ROUTE_IOAPIC (1 << 20) -#define PAD_CFG0_RX_POL_INVERT (1 << 23) -#define PAD_CFG0_RX_POL_NONE (0 << 23) - -#define PAD_CFG0_TRIG_MASK (3 << 25) -#define PAD_CFG0_TRIG_LEVEL (0 << 25) -#define PAD_CFG0_TRIG_EDGE_SINGLE (1 << 25) /* controlled by RX_INVERT*/ -#define PAD_CFG0_TRIG_OFF (2 << 25) -#define PAD_CFG0_TRIG_EDGE_BOTH (3 << 25) -#define PAD_CFG0_RESET_MASK (3 << 30) -#define PAD_CFG0_RESET_PWROK (0 << 30) -#define PAD_CFG0_RESET_DEEP (1 << 30) -#define PAD_CFG0_RESET_PLTRST (2 << 30) -#define PAD_CFG0_RESET_RSMRST (3 << 30) - -/* Use the fourth bit in IntSel field to indicate gpio - * ownership. This field is RO and hence not used during - * gpio configuration. - */ -#define PAD_CFG1_GPIO_DRIVER (0x1 << 4) -#define PAD_CFG1_IRQ_MASK (0xff << 0) -#define PAD_CFG1_PULL_MASK (0xf << 10) -#define PAD_CFG1_PULL_NONE (0x0 << 10) -#define PAD_CFG1_PULL_DN_5K (0x2 << 10) -#define PAD_CFG1_PULL_DN_20K (0x4 << 10) -#define PAD_CFG1_PULL_UP_1K (0x9 << 10) -#define PAD_CFG1_PULL_UP_5K (0xa << 10) -#define PAD_CFG1_PULL_UP_2K (0xb << 10) -#define PAD_CFG1_PULL_UP_20K (0xc << 10) -#define PAD_CFG1_PULL_UP_667 (0xd << 10) -#define PAD_CFG1_PULL_NATIVE (0xf << 10) -/* Tx enabled driving last value driven, Rx enabled */ -#define PAD_CFG1_IOSSTATE_TxLASTRxE (0x0 << 0) -/* Tx enabled driving 0, Rx disabled and Rx driving 0 back to its controller - * internally */ -#define PAD_CFG1_IOSSTATE_Tx0RxDCRx0 (0x1 << 0) -/* Tx enabled driving 0, Rx disabled and Rx driving 1 back to its controller - * internally */ -#define PAD_CFG1_IOSSTATE_Tx0RXDCRx1 (0x2 << 0) -/* Tx enabled driving 1, Rx disabled and Rx driving 0 back to its controller - * internally */ -#define PAD_CFG1_IOSSTATE_Tx1RXDCRx0 (0x3 << 0) -/* Tx enabled driving 1, Rx disabled and Rx driving 1 back to its controller - * internally */ -#define PAD_CFG1_IOSSTATE_Tx1RxDCRx1 (0x4 << 0) -/* Tx enabled driving 0, Rx enabled */ -#define PAD_CFG1_IOSSTATE_Tx0RxE (0x5 << 0) -/* Tx enabled driving 1, Rx enabled */ -#define PAD_CFG1_IOSSTATE_Tx1RxE (0x6 << 0) -/* Hi-Z, Rx driving 0 back to its controller internally */ -#define PAD_CFG1_IOSSTATE_HIZCRx0 (0x7 << 0) -/* Hi-Z, Rx driving 1 back to its controller internally */ -#define PAD_CFG1_IOSSTATE_HIZCRx1 (0x8 << 0) -#define PAD_CFG1_IOSSTATE_TxDRxE (0x9 << 0) /* Tx disabled, Rx enabled */ -#define PAD_CFG1_IOSSTATE_IGNORE (0xf << 0) /* Ignore Iostandby */ -#define PAD_CFG1_IOSSTATE_MASK 0xf /* mask to extract Iostandby bits */ -#define PAD_CFG1_IOSSTATE_SHIFT 14 /* set Iostandby bits [17:14] */ -#define PAD_CFG1_IOSTERM_SAME (0x0 << 8) /* Same as functional mode */ -#define PAD_CFG1_IOSTERM_DISPUPD (0x1 << 8) /* Disable Pull-up/Pull-down */ -#define PAD_CFG1_IOSTERM_ENPD (0x2 << 8) /* Enable Pull-down */ -#define PAD_CFG1_IOSTERM_ENPU (0x3 << 8) /* Enable Pull-up */ +#define HOSTSW_OWN_REG_0 0x80 #define PAD_CFG_BASE 0x500 -#define PAD_CFG_OFFSET(pad) (PAD_CFG_BASE + ((pad) * 8)) + +#define GPI_INT_EN_0 0x110 #define GPI_SMI_STS_0 0x140 #define GPI_SMI_EN_0 0x150 -#define GPI_SMI_STS_OFFSET(group) (GPI_SMI_STS_0 + ((group) * 4)) -#define GPI_SMI_EN_OFFSET(group) (GPI_SMI_EN_0 + ((group) * 4)) #define NUM_N_PADS (PAD_N(SVID0_CLK) + 1) #define NUM_NW_PADS (PAD_NW(GPIO_123) + 1) @@ -432,13 +348,21 @@ #define GPIO_COMM_W_NAME "INT3452:02" #define GPIO_COMM_SW_NAME "INT3452:03" -/* Default configurations */ -#define PAD_CFG0_DEFAULT_FUNC(x) (PAD_CFG0_RESET_DEEP \ - | PAD_CFG0_MODE_FUNC(x)) -#define PAD_CFG0_DEFAULT_NATIVE PAD_CFG0_DEFAULT_FUNC(1) +/* Following is used in gpio asl */ +#define GPIO_COMM_NAME "INT3452" +#define GPIO_COMM_0_DESC \ + "General Purpose Input/Output (GPIO) Controller - North" +#define GPIO_COMM_1_DESC \ + "General Purpose Input/Output (GPIO) Controller - Northwest" +#define GPIO_COMM_2_DESC \ + "General Purpose Input/Output (GPIO) Controller - West" +#define GPIO_COMM_3_DESC \ + "General Purpose Input/Output (GPIO) Controller - Southwest" -#define PAD_CFG1_DEFAULT_PULLUP PAD_CFG1_PULL_UP_20K -#define PAD_CFG1_DEFAULT_NATIVE PAD_CFG1_PULL_NATIVE +#define GPIO_COMM0_PID PID_GPIO_N +#define GPIO_COMM1_PID PID_GPIO_NW +#define GPIO_COMM2_PID PID_GPIO_W +#define GPIO_COMM3_PID PID_GPIO_SW /* * IOxAPIC IRQs for the GPIOs, overlap is expected as we encourage to use @@ -554,4 +478,5 @@ #define GPIO_72_IRQ 0x65 #define GPIO_73_IRQ 0x66 -#endif /* _SOC_APOLLOLAKE_GPIO_DEFS_H_ */ +#define GPIO_NUM_PAD_CFG_REGS 2 /* DW0, DW1 */ +#endif /* _SOC_APOLLOLAKE_GPIO_H_ */ |