summaryrefslogtreecommitdiff
path: root/src/soc/intel/apollolake/include
diff options
context:
space:
mode:
Diffstat (limited to 'src/soc/intel/apollolake/include')
-rw-r--r--src/soc/intel/apollolake/include/soc/fsp/FspUpd.h74
-rw-r--r--src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h267
-rw-r--r--src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h244
3 files changed, 376 insertions, 209 deletions
diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h
index 46fb08042e..61d03a2901 100644
--- a/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h
+++ b/src/soc/intel/apollolake/include/soc/fsp/FspUpd.h
@@ -1,42 +1,42 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2016 Intel Corp.
- * (Written by Lance Zhao <lijian.zhao@intel.com> for Intel Corp.)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _FSP_API_H_
-#define _FSP_API_H_
-
-/** FSP UPD Header
-**/
-struct FSP_UPD_HEADER {
+/** @file
-/** Offset 0x00 to 0x07 - UPD Region Signature
- The signature will be
- "FSPT_UPD" for FSP-T
- "FSPM_UPD" for FSP-M
- "FSPS_UPD" for FSP-S
-**/
- uint64_t Signature;
+Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-/** Offset 0x08 - Revision
-**/
- uint8_t Revision;
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
-/** Offset 0x09 to 0x1F - ReservedUpd
**/
- uint8_t ReservedUpd[23];
-} __attribute__((packed));
-#endif /* _FSP_API_H_ */
+#ifndef __FSPUPD_H__
+#define __FSPUPD_H__
+
+#define FSPT_UPD_SIGNATURE 0x4450555F54505346 /* 'FSPT_UPD' */
+
+#define FSPM_UPD_SIGNATURE 0x4450555F4D505346 /* 'FSPM_UPD' */
+
+#define FSPS_UPD_SIGNATURE 0x4450555F53505346 /* 'FSPS_UPD' */
+
+#endif
diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h
index b1a16072e5..906f6a4bb6 100644
--- a/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h
+++ b/src/soc/intel/apollolake/include/soc/fsp/FspmUpd.h
@@ -34,111 +34,28 @@ are permitted provided that the following conditions are met:
#define __FSPMUPD_H__
#include "FspUpd.h"
-
-
-typedef union {
- uint32_t PadCnf0;
- struct {
- uint32_t GPIOTxState:1; ///< 0 GPIO TX State
- uint32_t GPIORxState:1; ///< 1 GPIO RX State, RO
- uint32_t Reserved1:6; ///< 2-7 Reserved, RO
- uint32_t GPIORxTxDis:2; ///< 8-9 GPIO RX Disable[9], GPIO TX Disable[8]
- uint32_t PMode:3; ///< 10-12 Pad Mode, 0h = GPIO Controller controls the Pad; 1h = Native Function 1, if applicable, controls the pad; 2h = Native Function 2, if applicable, controls the pad, etc.
- uint32_t Reserved2:4; ///< 13-16 Reserved, RO
- uint32_t GPIRout:4; ///< 17-20 Route to IOxAPIC[20], SCI[19], SMI[18], NMI[17]
- uint32_t RXTXEnCfg:2; ///< 21-22 RX/TX Enable Config (RXTXEnCfg) RO
- uint32_t RXINV:1; ///< 23 RX Invert, 0 = No inversion; 1 = Inversion
- uint32_t PreGfRXSel:1; ///< 24 Pre Glitch Filter Stage RX Pad State Select, RO, not support in BXT
- uint32_t RxEvCfg:2; ///< 25-26 0h = Level 1h = Edge (RxInv=0 for rising edge; 1 for falling edge), 2h = Disabled ,3h = Either rising edge or falling edge
- uint32_t Reserved3:1; ///< 27 RO
- uint32_t RXRAW1:1; ///< 28 Override the RX to 1
- uint32_t RXPadStSel:1; ///< 29 RX Pad State Select
- uint32_t PadRstCfg:2; ///< 30-31 Pad Reset Config
- } r;
-} BL_CONF_PAD0;
-
-typedef union {
- uint32_t PadCnf1;
- struct {
- uint32_t IntSel:7; ///< 0-6 Interrupt Select. RO
- uint32_t Reserved:1; ///< 7 Reserved.
- uint32_t IOSTerm:2; ///< 8-9 I/O Standby Termination (IOSTerm) RW
- uint32_t Term:4; ///< 10-13 Termination,
- ///< 0 000: none;0 010: 5k wpd;0 100: 20k wpd;1 000: none;1 001: 1k wpu;1 011: 2k wpu;1 010: 5k wpu;
- ///< 1 100: 20k wpu;1 101: 1k & 2k wpu;1 111: (optional) Native controller selected by Pad Mode controls the Termination
- uint32_t IOSState:4; ///< 14-17 I/O Standby State, I/O Standby is not implemented in BXT, RW
- uint32_t CFIOPadCfg:14; ///< 18-31 For BXT, this is done thru Family Register if necessary. RO
- } r;
-} BL_CONF_PAD1;
-
-struct BL_GPIO_PAD_INIT {
- BL_CONF_PAD0 PadConfg0;
- BL_CONF_PAD1 PadConfg1;
- uint8_t Community;
- uint16_t MmioAddress;
- bool HostSw;
- bool WakeEnabled;
- wchar_t *PadName;
-} __attribute__((packed));
-
-/** Fsp M Architectural UPD
-**/
-struct FSP_M_ARCH_UPD {
-
-/** Offset 0x0020
-**/
- uint8_t Revision;
-
-/** Offset 0x0021
-**/
- uint8_t Reserved[3];
-
-/** Offset 0x0024
-**/
- void* NvsBufferPtr;
-
-/** Offset 0x0028 - StackBase
- To hold the stack base.
-**/
- void* StackBase;
-
-/** Offset 0x002C - StackSize
- To hold the stack size.
-**/
- uint32_t StackSize;
-
-/** Offset 0x0030 - BootLoaderTolumSize
- To pass Bootloader Tolum size.
-**/
- uint32_t BootLoaderTolumSize;
-
-/** Offset 0x0034 - Bootmode
- To maintain Bootmode details.
-**/
- uint32_t Bootmode;
-
-/** Offset 0x0038
-**/
- uint8_t Reserved1[8];
-} __attribute__((packed));
+#include <fsp/upd.h>
/** Fsp M Configuration
**/
struct FSP_M_CONFIG {
/** Offset 0x0040 - Debug Serial Port Base address
- Debug serial port base address. This option will be used only when the 'Serial Port Debug Device' option is set to 'External Device'. 0x00000000(Default).
+ Debug serial port base address. This option will be used only when the 'Serial Port
+ Debug Device' option is set to 'External Device'. 0x00000000(Default).
**/
uint32_t SerialDebugPortAddress;
/** Offset 0x0044 - Debug Serial Port Type
- 16550 compatible debug serial port resource type. NONE means no serial port support. 0x02:MMIO(Default).
+ 16550 compatible debug serial port resource type. NONE means no serial port support.
+ 0x02:MMIO(Default).
0:NONE, 1:I/O, 2:MMIO
**/
uint8_t SerialDebugPortType;
/** Offset 0x0045 - Serial Port Debug Device
- Select active serial port device for debug. For SOC UART devices,'Debug Serial Port Base' options will be ignored. 0x02:SOC UART2(Default).
+ Select active serial port device for debug. For SOC UART devices,'Debug Serial Port
+ Base' options will be ignored. 0x02:SOC UART2(Default).
0:SOC UART0, 1:SOC UART1, 2:SOC UART2, 3:External Device
**/
uint8_t SerialDebugPortDevice;
@@ -156,44 +73,63 @@ struct FSP_M_CONFIG {
uint8_t MrcFastBoot;
/** Offset 0x0048 - Integrated Graphics Device
- Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Always disable IGD. 0x00:Disable, 0x01:Enable(Default).
+ Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video
+ Adaptor. Disable: Always disable IGD. 0x00:Disable, 0x01:Enable(Default).
$EN_DIS
**/
uint8_t Igd;
/** Offset 0x0049 - DVMT Pre-Allocated
- Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. 0x02:64 MB(Default).
- 0x02:64 MB, 0x03:96 MB, 0x04:128 MB, 0x05:160 MB, 0x06:192 MB, 0x07:224 MB, 0x08:256 MB, 0x09:288 MB, 0x0A:320 MB, 0x0B:352 MB, 0x0C:384 MB, 0x0D:416 MB, 0x0E:448 MB, 0x0F:480 MB, 0x10:512 MB
+ Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
+ Graphics Device. 0x02:64 MB(Default).
+ 0x02:64 MB, 0x03:96 MB, 0x04:128 MB, 0x05:160 MB, 0x06:192 MB, 0x07:224 MB, 0x08:256
+ MB, 0x09:288 MB, 0x0A:320 MB, 0x0B:352 MB, 0x0C:384 MB, 0x0D:416 MB, 0x0E:448 MB,
+ 0x0F:480 MB, 0x10:512 MB
**/
uint8_t IgdDvmt50PreAlloc;
/** Offset 0x004A - Aperture Size
- Select the Aperture Size used by the Internal Graphics Device. 0x1:128 MB(Default), 0x2:256 MB, 0x3:512 MB.
+ Select the Aperture Size used by the Internal Graphics Device. 0x1:128 MB(Default),
+ 0x2:256 MB, 0x3:512 MB.
0x1:128 MB, 0x2:256 MB, 0x3:512 MB
**/
uint8_t IgdApertureSize;
/** Offset 0x004B - GTT Size
- Select the GTT Size used by the Internal Graphics Device. 0x1:2 MB, 0x2:4 MB, 0x3:8 MB(Default).
+ Select the GTT Size used by the Internal Graphics Device. 0x1:2 MB, 0x2:4 MB, 0x3:8
+ MB(Default).
0x1:2 MB, 0x2:4 MB, 0x3:8 MB
**/
uint8_t GttSize;
/** Offset 0x004C - Primary Display
- Select which of IGD/PCI Graphics device should be Primary Display. 0x0:AUTO(Default), 0x2:IGD, 0x3:PCI
+ Select which of IGD/PCI Graphics device should be Primary Display. 0x0:AUTO(Default),
+ 0x2:IGD, 0x3:PCI
0x0:AUTO, 0x2:IGD, 0x3:PCI
**/
uint8_t PrimaryVideoAdaptor;
/** Offset 0x004D - Package
- NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L is being used. 0x00(Default).
+ NOTE: First option is CoPOP if LPDDR3/LPDDR4 is being used. It is SODIMM if DDR3L
+ is being used. 0x00(Default).
0x0:CoPop, 0x1:BGA, 0x2:LP3 ACRD
**/
uint8_t Package;
/** Offset 0x004E - Profile
Profile list. 0x19(Default).
- 0x1:WIO2_800_7_8_8, 0x2:WIO2_1066_9_10_10, 0x3:LPDDR3_1066_8_10_10, 0x4:LPDDR3_1333_10_12_12, 0x5:LPDDR3_1600_12_15_15, 0x6:LPDDR3_1866_14_17_17, 0x7:LPDDR3_2133_16_20_20, 0x8:LPDDR4_1066_10_10_10, 0x9:LPDDR4_1600_14_15_15, 0xA:LPDDR4_2133_20_20_20, 0xB:LPDDR4_2400_24_22_22, 0xC:LPDDR4_2666_24_24_24, 0xD:LPDDR4_2933_28_27_27, 0xE:LPDDR4_3200_28_29_29, 0xF:DDR3_1066_6_6_6, 0x10:DDR3_1066_7_7_7, 0x11:DDR3_1066_8_8_8, 0x12:DDR3_1333_7_7_7, 0x13:DDR3_1333_8_8_8, 0x14:DDR3_1333_9_9_9, 0x15:DDR3_1333_10_10_10, 0x16:DDR3_1600_8_8_8, 0x17:DDR3_1600_9_9_9, 0x18:DDR3_1600_10_10_10, 0x19:DDR3_1600_11_11_11, 0x1A:DDR3_1866_10_10_10, 0x1B:DDR3_1866_11_11_11, 0x1C:DDR3_1866_12_12_12, 0x1D:DDR3_1866_13_13_13, 0x1E:DDR3_2133_11_11_11, 0x1F:DDR3_2133_12_12_12, 0x20:DDR3_2133_13_13_13, 0x21:DDR3_2133_14_14_14, 0x22:DDR4_1333_10_10_10, 0x23:DDR4_1600_10_10_10, 0x24:DDR4_1600_11_11_11, 0x25:DDR4_1600_12_12_12, 0x26:DDR4_1866_12_12_12, 0x27:DDR4_1866_13_13_13, 0x28:DDR4_1866_14_14_14, 0x29:DDR4_2133_14_14_14, 0x2A:DDR4_2133_15_15_15, 0x2B:DDR4_2133_16_16_16, 0x2C:DDR4_2400_15_15_15, 0x2D:DDR4_2400_16_16_16, 0x2E:DDR4_2400_17_17_17, 0x2F:DDR4_2400_18_18_18
+ 0x1:WIO2_800_7_8_8, 0x2:WIO2_1066_9_10_10, 0x3:LPDDR3_1066_8_10_10, 0x4:LPDDR3_1333_10_12_12,
+ 0x5:LPDDR3_1600_12_15_15, 0x6:LPDDR3_1866_14_17_17, 0x7:LPDDR3_2133_16_20_20, 0x8:LPDDR4_1066_10_10_10,
+ 0x9:LPDDR4_1600_14_15_15, 0xA:LPDDR4_2133_20_20_20, 0xB:LPDDR4_2400_24_22_22, 0xC:LPDDR4_2666_24_24_24,
+ 0xD:LPDDR4_2933_28_27_27, 0xE:LPDDR4_3200_28_29_29, 0xF:DDR3_1066_6_6_6, 0x10:DDR3_1066_7_7_7,
+ 0x11:DDR3_1066_8_8_8, 0x12:DDR3_1333_7_7_7, 0x13:DDR3_1333_8_8_8, 0x14:DDR3_1333_9_9_9,
+ 0x15:DDR3_1333_10_10_10, 0x16:DDR3_1600_8_8_8, 0x17:DDR3_1600_9_9_9, 0x18:DDR3_1600_10_10_10,
+ 0x19:DDR3_1600_11_11_11, 0x1A:DDR3_1866_10_10_10, 0x1B:DDR3_1866_11_11_11, 0x1C:DDR3_1866_12_12_12,
+ 0x1D:DDR3_1866_13_13_13, 0x1E:DDR3_2133_11_11_11, 0x1F:DDR3_2133_12_12_12, 0x20:DDR3_2133_13_13_13,
+ 0x21:DDR3_2133_14_14_14, 0x22:DDR4_1333_10_10_10, 0x23:DDR4_1600_10_10_10, 0x24:DDR4_1600_11_11_11,
+ 0x25:DDR4_1600_12_12_12, 0x26:DDR4_1866_12_12_12, 0x27:DDR4_1866_13_13_13, 0x28:DDR4_1866_14_14_14,
+ 0x29:DDR4_2133_14_14_14, 0x2A:DDR4_2133_15_15_15, 0x2B:DDR4_2133_16_16_16, 0x2C:DDR4_2400_15_15_15,
+ 0x2D:DDR4_2400_16_16_16, 0x2E:DDR4_2400_17_17_17, 0x2F:DDR4_2400_18_18_18
**/
uint8_t Profile;
@@ -204,7 +140,7 @@ struct FSP_M_CONFIG {
uint8_t MemoryDown;
/** Offset 0x0050 - DDR3LPageSize
- NOTE: Only for memory down or downgrade DDR3L frequency. 0x01:1KB, 0x02:2KB, 0x00(Default).
+ NOTE: Only for memory down or downgrade DDR3L frequency. 0x01:1KB(Default), 0x02:2KB.
0x1:1KB, 0x2:2KB
**/
uint8_t DDR3LPageSize;
@@ -232,8 +168,8 @@ struct FSP_M_CONFIG {
uint16_t SliceHashMask;
/** Offset 0x0057 - InterleavedMode
- Interleaved Mode. 0x00:Disable(Default), 0x01:Enable.
- $EN_DIS
+ Interleaved Mode. 0x00:Disable(Default), 0x02:Enable.
+ 0x0:Disable, 0x2:Enable
**/
uint8_t InterleavedMode;
@@ -244,7 +180,8 @@ struct FSP_M_CONFIG {
uint8_t ChannelsSlicesEnable;
/** Offset 0x0059 - MinRefRate2xEnable
- Provided as a means to defend against Row-Hammer attacks. 0x00:Disable(Default), 0x01:Enable.
+ Provided as a means to defend against Row-Hammer attacks. 0x00:Disable(Default),
+ 0x01:Enable.
$EN_DIS
**/
uint8_t MinRefRate2xEnable;
@@ -262,23 +199,30 @@ struct FSP_M_CONFIG {
uint8_t RmtMode;
/** Offset 0x005C - MemorySizeLimit
- Memory Size Limit: This value is used to restrict the total amount of memory and the calculations based on it. Value is in MB. Example encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default)
+ Memory Size Limit: This value is used to restrict the total amount of memory and
+ the calculations based on it. Value is in MB. Example encodings are: 0x400 = 1GB,
+ 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default)
**/
uint16_t MemorySizeLimit;
/** Offset 0x005E - LowMemoryMaxValue
- Low Memory Max Value: This value is used to restrict the amount of memory below 4GB and the calculations based on it. Value is in MB.Example encodings are: 0x400 = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default).
+ Low Memory Max Value: This value is used to restrict the amount of memory below
+ 4GB and the calculations based on it. Value is in MB.Example encodings are: 0x400
+ = 1GB, 0x800 = 2GB, 0x1000 = 4GB, 0x2000 8GB. 0x0000(Default).
**/
uint16_t LowMemoryMaxValue;
/** Offset 0x0060 - DisableFastBoot
- 00:Disabled Used saved training data (if valid)(Default), 01:Enabled; Full re-train of memory.
+ 00:Disabled Used saved training data (if valid)(Default), 01:Enabled; Full re-train
+ of memory.
$EN_DIS
**/
uint8_t DisableFastBoot;
/** Offset 0x0061 - HighMemoryMaxValue
- High Memory Max Value: This value is used to restrict the amount of memory above 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB, 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default).
+ High Memory Max Value: This value is used to restrict the amount of memory above
+ 4GB and the calculations based on it. Value is in MB. Example encodings are: 0x0400:1GB,
+ 0x0800:2GB, 0x1000:4GB, 0x2000:8GB. 0x00(Default).
**/
uint16_t HighMemoryMaxValue;
@@ -310,7 +254,12 @@ struct FSP_M_CONFIG {
uint8_t Ch0_DramDensity;
/** Offset 0x0068 - Ch0_Option
- Rank Select Interleaving Enable. See Address Mapping section for full description. 0:Rank Select Interleaving disabled, 1:Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B). 0x03(Default).
+ Rank Select Interleaving Enable. See Address Mapping section for full description.
+ 0:Rank Select Interleaving disabled, 1:Rank Select Interleaving enabled. [1] Bank
+ Address Hashing Enable. See Address Mapping section for full description. 0:Bank
+ Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4]
+ This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B).
+ 0x03(Default).
**/
uint8_t Ch0_Option;
@@ -330,7 +279,11 @@ struct FSP_M_CONFIG {
uint8_t Ch0_Mode2N;
/** Offset 0x006C - Ch0_OdtLevels
- Rank Select Interleaving Enable. See Address Mapping section for full description. 0:Rank Select Interleaving disabled(Default), 1:Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:00:1KB (A), 01:2KB (B).
+ Rank Select Interleaving Enable. See Address Mapping section for full description.
+ 0:Rank Select Interleaving disabled(Default), 1:Rank Select Interleaving enabled.
+ [1] Bank Address Hashing Enable. See Address Mapping section for full description.
+ 0:Bank Address Hashing disabled, 1:Bank Address Hashing enabled. [3:2] Reserved.
+ [5:4] This register specifies the address mapping to be used:00:1KB (A), 01:2KB (B).
**/
uint8_t Ch0_OdtLevels;
@@ -352,7 +305,12 @@ struct FSP_M_CONFIG {
uint8_t Ch1_DramDensity;
/** Offset 0x0070 - Ch1_Option
- Rank Select Interleaving Enable. See Address Mapping section for full description. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB (B), 0x03(Default).
+ Rank Select Interleaving Enable. See Address Mapping section for full description.
+ 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1]
+ Bank Address Hashing Enable. See Address Mapping section for full description.
+ 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved.
+ [5:4] This register specifies the address mapping to be used: 00:1KB (A), 01:2KB
+ (B), 0x03(Default).
**/
uint8_t Ch1_Option;
@@ -372,7 +330,8 @@ struct FSP_M_CONFIG {
uint8_t Ch1_Mode2N;
/** Offset 0x0074 - Ch1_OdtLevels
- Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH. 3:ODT_AB_HIGH_LOW.
+ Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default),
+ 1:ODT_AB_HIGH_HIGH. 3:ODT_AB_HIGH_LOW.
**/
uint8_t Ch1_OdtLevels;
@@ -394,7 +353,12 @@ struct FSP_M_CONFIG {
uint8_t Ch2_DramDensity;
/** Offset 0x0078 - Ch2_Option
- Rank Select Interleaving Enable. See Address Mapping section for full description.. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description.. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:. 00:1KB (A)(Default). 01:2KB (B).
+ Rank Select Interleaving Enable. See Address Mapping section for full description..
+ 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1]
+ Bank Address Hashing Enable. See Address Mapping section for full description..
+ 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved.
+ [5:4] This register specifies the address mapping to be used:. 00:1KB (A)(Default).
+ 01:2KB (B).
**/
uint8_t Ch2_Option;
@@ -414,7 +378,8 @@ struct FSP_M_CONFIG {
uint8_t Ch2_Mode2N;
/** Offset 0x007C - Ch2_OdtLevels
- Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW.
+ Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default),
+ 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW.
**/
uint8_t Ch2_OdtLevels;
@@ -424,19 +389,26 @@ struct FSP_M_CONFIG {
uint8_t Ch3_RankEnable;
/** Offset 0x007E - Ch3_DeviceWidth
- NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00:x8(Default), 0x01:x16, 0x02:x32, 0x03:x64.
+ NOTE: Only for memory down. DRAM Device Data Width populated on Ranks 0 and 1. 0x00:x8(Default),
+ 0x01:x16, 0x02:x32, 0x03:x64.
0b0000:x8, 0b0001:x16, 0b0010:x32, 0b0011:x64
**/
uint8_t Ch3_DeviceWidth;
/** Offset 0x007F - Ch3_DramDensity
- NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default), 0x01:6Gb, 0x02:8Gb, 0x03:12Gb, 0x04:16Gb.
+ NOTE: Only for memory down. DRAM Device Density populated on Ranks 0 and 1. 0x00:4Gb(Default),
+ 0x01:6Gb, 0x02:8Gb, 0x03:12Gb, 0x04:16Gb.
0b0000:4Gb, 0b0001:6Gb, 0b0010:8Gb, 0b0011:12Gb, 0b0100:16Gb
**/
uint8_t Ch3_DramDensity;
/** Offset 0x0080 - Ch3_Option
- Rank Select Interleaving Enable. See Address Mapping section for full description.. 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1] Bank Address Hashing Enable. See Address Mapping section for full description.. 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved. [5:4] This register specifies the address mapping to be used:. 00 - 1KB (A). 01 - 2KB (B).
+ Rank Select Interleaving Enable. See Address Mapping section for full description..
+ 0 - Rank Select Interleaving disabled. 1 - Rank Select Interleaving enabled. [1]
+ Bank Address Hashing Enable. See Address Mapping section for full description..
+ 0 - Bank Address Hashing disabled. 1 - Bank Address Hashing enabled. [3:2] Reserved.
+ [5:4] This register specifies the address mapping to be used:. 00 - 1KB (A). 01
+ - 2KB (B).
**/
uint8_t Ch3_Option;
@@ -456,7 +428,8 @@ struct FSP_M_CONFIG {
uint8_t Ch3_Mode2N;
/** Offset 0x0084 - Ch3_OdtLevels
- Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default), 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW.
+ Parameter used to determine if ODT will be held high or low. 0:Use MRC default(Default),
+ 1:ODT_AB_HIGH_HIGH, 3:ODT_AB_HIGH_LOW.
**/
uint8_t Ch3_OdtLevels;
@@ -495,25 +468,65 @@ struct FSP_M_CONFIG {
**/
uint32_t MsgLevelMask;
-/** Offset 0x010C - FIT Table Pointer
- FIT table pointer. 0x00000000(Default).
+/** Offset 0x010C
+**/
+ uint32_t UnusedUpdSpace0;
+
+/** Offset 0x0110 - PreMem GPIO Table Entry Number. Currently maximum entry number is 4
+ Number of Entries in PreMem GPIO Table. 0(Default).
**/
- uint32_t FitTablePtr;
+ uint8_t PreMemGpioTableEntryNum;
-/** Offset 0x0110 - GPIO Table Pointer
- GPIO table pointer to a BL_GPIO_PAD_INIT structure. 0x00000000(Default).
+/** Offset 0x0111 - PreMem GPIO Pin Number for each table
+ Number of Pins in each PreMem GPIO Table. 0(Default).
**/
- struct BL_GPIO_PAD_INIT* GpioPadInitTablePtr;
+ uint8_t PreMemGpioTablePinNum[4];
-/** Offset 0x0114 - Enhance the port 8xh decoding
+/** Offset 0x0115 - PreMem GPIO Table Pointer
+ Pointer to Array of pointers to PreMem GPIO Table. 0x00000000(Default).
+**/
+ uint32_t PreMemGpioTablePtr;
+
+/** Offset 0x0119 - Enhance the port 8xh decoding
Enable/Disable Enhance the port 8xh decoding. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
uint8_t EnhancePort8xhDecoding;
-/** Offset 0x0115
+/** Offset 0x011A - OEM File Loading Address
+ Determine the memory base address to load a specified file from CSE file system
+ after memory is available.
+**/
+ uint32_t OemLoadingBase;
+
+/** Offset 0x011E - OEM File Name to Load
+ Specify a file name to load from CSE file system after memory is available. Empty
+ indicates no file needs to be loaded.
+**/
+ uint8_t OemFileName[16];
+
+/** Offset 0x012E - SPD Data Write
+ Enable/Disable SPD data write on the SMBUS. 0x00:Disable(Default), 0x01:Enable.
+ $EN_DIS
+**/
+ uint8_t SpdWriteEnable;
+
+/** Offset 0x012F - MRC Training Data Saving
+ Enable/Disable MRC training data saving in FSP. 0x00:Disable(Default), 0x01:Enable.
+ $EN_DIS
+**/
+ uint8_t MrcDataSaving;
+
+/** Offset 0x0130 - eMMC Trace Length
+ Select eMMC trace length to load OEM file from when loading OEM file name is specified.
+ 0x0:Long(Default), 0x1:Short.
+ 0x0:Long, 0x1:Short
**/
- uint8_t ReservedFspmUpd[59];
+ uint8_t eMMCTraceLen;
+
+/** Offset 0x0131
+**/
+ uint8_t ReservedFspmUpd[31];
} __attribute__((packed));
/** Fsp M Test Configuration
@@ -542,8 +555,6 @@ struct FSP_M_RESTRICTED_CONFIG {
uint8_t ReservedFspmRestrictedUpd[138];
} __attribute__((packed));
-#define FSPM_UPD_SIGNATURE 0x4450555F4D505346 /* 'FSPM_UPD' */
-
/** Fsp M UPD Configuration
**/
struct FSPM_UPD {
@@ -554,7 +565,7 @@ struct FSPM_UPD {
/** Offset 0x0020
**/
- struct FSP_M_ARCH_UPD FspmArchUpd;
+ struct FSPM_ARCH_UPD FspmArchUpd;
/** Offset 0x0040
**/
diff --git a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h b/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h
index 2ada27f806..92c2d752bc 100644
--- a/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h
+++ b/src/soc/intel/apollolake/include/soc/fsp/FspsUpd.h
@@ -34,7 +34,7 @@ are permitted provided that the following conditions are met:
#define __FSPSUPD_H__
#include "FspUpd.h"
-
+#include <fsp/upd.h>
/** Fsp S Configuration
**/
@@ -70,7 +70,8 @@ struct FSP_S_CONFIG {
uint8_t VmxEnable;
/** Offset 0x0025 - Memory region allocation for Processor Trace
- Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to 128MB (0xF); <b>0xFF: Disable. 0xFF:Disable(Default)
+ Memory region allocation for Processor Trace, allowed range is from 4K (0x0) to
+ 128MB (0xF); <b>0xFF: Disable. 0xFF:Disable(Default)
**/
uint8_t ProcTraceMemSize;
@@ -110,7 +111,8 @@ struct FSP_S_CONFIG {
uint8_t BiProcHot;
/** Offset 0x002C - Max Pkg Cstate
- Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s, 6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto.
+ Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s,
+ 6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto.
**/
uint8_t PkgCStateLimit;
@@ -119,12 +121,15 @@ struct FSP_S_CONFIG {
uint8_t UnusedUpdSpace0;
/** Offset 0x002E - C-State auto-demotion
- C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7 Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion to C1 and C3.
+ C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7
+ Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion
+ to C1 and C3.
**/
uint8_t CStateAutoDemotion;
/** Offset 0x002F - C-State un-demotion
- C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion, 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion.
+ C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion,
+ 2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion.
**/
uint8_t CStateUnDemotion;
@@ -436,7 +441,8 @@ struct FSP_S_CONFIG {
/** Offset 0x0091 - HD-Audio I/O Buffer Ownership
Set HD-Audio I/O Buffer Ownership. 0:Disable(Default), 1:Enable.
- 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers
+ 0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and
+ I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers
**/
uint8_t HdAudioIoBufferOwnership;
@@ -453,13 +459,15 @@ struct FSP_S_CONFIG {
uint8_t HdAudioVcType;
/** Offset 0x0094 - HD-Audio Link Frequency
- HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid.
+ HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz,
+ 4:96MHz, 5:Invalid.
0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid
**/
uint8_t HdAudioLinkFrequency;
/** Offset 0x0095 - HD-Audio iDisp-Link Frequency
- HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz, 4:96MHz, 5:Invalid.
+ HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz,
+ 4:96MHz, 5:Invalid.
0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid
**/
uint8_t HdAudioIDispLinkFrequency;
@@ -495,13 +503,13 @@ struct FSP_S_CONFIG {
uint8_t DspEndpointI2sHp;
/** Offset 0x009B - HD-Audio Controller Power Gating
- Enable/Disable HD-Audio Controller Power Gating. 0:Disable(Default), 1:Enable.
+ Enable/Disable HD-Audio Controller Power Gating. This option is deprecated.
$EN_DIS
**/
uint8_t AudioCtlPwrGate;
/** Offset 0x009C - HD-Audio ADSP Power Gating
- Enable/Disable HD-Audio ADSP Power Gating. 0:Disable(Default), 1:Enable.
+ Enable/Disable HD-Audio ADSP Power Gating. This option is deprecated.
$EN_DIS
**/
uint8_t AudioDspPwrGate;
@@ -538,13 +546,17 @@ struct FSP_S_CONFIG {
/** Offset 0x00A2 - Bitmask of DSP Feature
Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default).
- [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: Intel WoV, 1: Windows Voice Activation
+ [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6]
+ - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0:
+ Intel WoV, 1: Windows Voice Activation
**/
uint32_t DspFeatureMask;
/** Offset 0x00A6 - Bitmask of supported DSP Post-Processing Modules
Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default).
- [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6] - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0: Intel WoV, 1: Windows Voice Activation
+ [BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6]
+ - BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0:
+ Intel WoV, 1: Windows Voice Activation
**/
uint32_t DspPpModuleMask;
@@ -624,7 +636,8 @@ struct FSP_S_CONFIG {
uint8_t IshEnable;
/** Offset 0x00BB - ISH Controller
- Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. 0:Disable, 1:Enable(Default).
+ Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control
+ Register. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
uint8_t BiosInterface;
@@ -768,11 +781,11 @@ struct FSP_S_CONFIG {
**/
uint8_t OsDbgEnable;
-/** Offset 0x00E3 - Exi Feature
- Enable/Disable Exi Feature. 0:Disable(Default), 1: Enable.
+/** Offset 0x00E3 - DCI Feature
+ Enable/Disable DCI Feature. 0:Disable(Default), 1: Enable.
$EN_DIS
**/
- uint8_t ExiEnable;
+ uint8_t DciEn;
/** Offset 0x00E4 - Enable PCIE Clock Gating
Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default).
@@ -848,7 +861,8 @@ struct FSP_S_CONFIG {
uint8_t PcieRpClkReqSupported[6];
/** Offset 0x011F - Configure CLKREQ Number
- Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00, 0x01, 0x02, 0x03.
+ Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00,
+ 0x01, 0x02, 0x03.
**/
uint8_t PcieRpClkReqNumber[6];
@@ -923,7 +937,8 @@ struct FSP_S_CONFIG {
uint8_t PtmEnable[6];
/** Offset 0x0179 - ASPM
- PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1, 4:Auto(Default).
+ PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1,
+ 4:Auto(Default).
**/
uint8_t PcieRpAspm[6];
@@ -949,19 +964,21 @@ struct FSP_S_CONFIG {
uint8_t PmeB0S5Dis;
/** Offset 0x0192 - PCI Clock Run
- This member describes whether or not the PCI ClockRun feature of SC should be enabled. 0:Disable(Default), 1:Enable.
+ This member describes whether or not the PCI ClockRun feature of SC should be enabled.
+ 0:Disable(Default), 1:Enable.
$EN_DIS
**/
uint8_t PciClockRun;
/** Offset 0x0193 - Enable/Disable Timer 8254 Clock Setting
- Enable/Disable Timer 8254 Clock. 0:Disable, 1:Enable(Default).
+ Enable/Disable Timer 8254 Clock. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
uint8_t Timer8254ClkSetting;
/** Offset 0x0194 - Chipset SATA
- Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default).
+ Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports
+ the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default).
$EN_DIS
**/
uint8_t EnableSata;
@@ -1012,7 +1029,8 @@ struct FSP_S_CONFIG {
uint8_t SataPortsHotPlug[2];
/** Offset 0x01A0 - Mechanical Presence Switch
- Controls reporting if this port has an Mechanical Presence Switch.\nNote:Requires hardware support. 0:Disable, 1:Enable(Default).
+ Controls reporting if this port has an Mechanical Presence Switch.\nNote:Requires
+ hardware support. 0:Disable, 1:Enable(Default).
**/
uint8_t SataPortsInterlockSw[2];
@@ -1027,7 +1045,8 @@ struct FSP_S_CONFIG {
uint8_t SataPortsSpinUp[2];
/** Offset 0x01A6 - SATA Solid State
- Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard Disk Drive(Default), 1:Solid State Drive.
+ Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard
+ Disk Drive(Default), 1:Solid State Drive.
**/
uint8_t SataPortsSolidStateDrive[2];
@@ -1163,7 +1182,8 @@ struct FSP_S_CONFIG {
uint8_t RsvdSmbusAddressTable[128];
/** Offset 0x024F - XHCI Disable Compliance Mode
- Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True.
+ Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance
+ Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True.
$EN_DIS
**/
uint8_t DisableComplianceMode;
@@ -1181,7 +1201,8 @@ struct FSP_S_CONFIG {
uint8_t Usb30Mode;
/** Offset 0x0252 - Enable USB2 ports
- Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. 0x01(Default).
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on. 0x01(Default).
**/
uint8_t PortUsb20Enable[8];
@@ -1191,7 +1212,8 @@ struct FSP_S_CONFIG {
uint8_t PortUs20bOverCurrentPin[8];
/** Offset 0x0262 - Enable USB3 ports
- Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for port1, and so on. 0x01(Default).
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on. 0x01(Default).
**/
uint8_t PortUsb30Enable[6];
@@ -1213,7 +1235,8 @@ struct FSP_S_CONFIG {
uint8_t HsicSupportEnable;
/** Offset 0x0270 - Enable XHCI SSIC Support
- Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for port1. 0x00(Default).
+ Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for
+ port1. 0x00(Default).
**/
uint8_t SsicPortEnable[2];
@@ -1235,7 +1258,8 @@ struct FSP_S_CONFIG {
uint16_t ResetWaitTimer;
/** Offset 0x0277 - SMI Lock bit
- Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable, 1:Enable(Default).
+ Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable,
+ 1:Enable(Default).
$EN_DIS
**/
uint8_t LockDownGlobalSmi;
@@ -1269,7 +1293,8 @@ struct FSP_S_CONFIG {
uint16_t PcieRpLtrMaxSnoopLatency[6];
/** Offset 0x028A - Snoop Latency Override
- Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually enter override values.\nAuto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default).
+ Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually
+ enter override values.\nAuto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default).
**/
uint8_t PcieRpSnoopLatencyOverrideMode[6];
@@ -1279,7 +1304,8 @@ struct FSP_S_CONFIG {
uint16_t PcieRpSnoopLatencyOverrideValue[6];
/** Offset 0x029C - Snoop Latency Multiplier
- LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, 4:1048576ns, 5:33554432ns.
+ LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns,
+ 4:1048576ns, 5:33554432ns.
**/
uint8_t PcieRpSnoopLatencyOverrideMultiplier[6];
@@ -1289,7 +1315,9 @@ struct FSP_S_CONFIG {
uint16_t PcieRpLtrMaxNonSnoopLatency[6];
/** Offset 0x02AE - Non Snoop Latency Override
- Non Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually enter override values.\nAuto: Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default).
+ Non Snoop Latency Override for PCH PCIE. \nDisabled:Disable override.\nManual:Manually
+ enter override values.\nAuto: Maintain default BIOS flow. 0:Disable, 1:Enable,
+ 2:Auto(Default).
**/
uint8_t PcieRpNonSnoopLatencyOverrideMode[6];
@@ -1299,7 +1327,8 @@ struct FSP_S_CONFIG {
uint16_t PcieRpNonSnoopLatencyOverrideValue[6];
/** Offset 0x02C0 - Non Snoop Latency Multiplier
- LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns, 4:1048576ns, 5:33554432ns.
+ LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default),
+ 3:32768ns, 4:1048576ns, 5:33554432ns.
**/
uint8_t PcieRpNonSnoopLatencyOverrideMultiplier[6];
@@ -1314,25 +1343,154 @@ struct FSP_S_CONFIG {
uint8_t PcieRpSlotPowerLimitValue[6];
/** Offset 0x02D2 - Skip Multi-Processor Initialization
- When this is skipped, boot loader must initialize processors before SilicionInit API. 0: Initialize(Default), <b>1: Skip
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. 0: Initialize(Default), <b>1: Skip
$EN_DIS
**/
uint8_t SkipMpInit;
-/** Offset 0x02D3
+/** Offset 0x02D3 - DCI Auto Detect
+ Enable/disable DCI AUTO mode.
+ $EN_DIS
+**/
+ uint8_t DciAutoDetect;
+
+/** Offset 0x02D4 - Halt and Lock TCO Timer
+ Halt and Lock the TCO Timer (Watchdog).
+ 0:No, 1:Yes (default)
+**/
+ uint8_t TcoTimerHaltLock;
+
+/** Offset 0x02D5 - Power Button Override Peroid
+ specifies how long will PMC wait before initiating a global reset. 000b-4s(default),
+ 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.)
+ 0x0:4s, 0x1:6s, 0x2:8s, 0x3:10s, 0x4:12s, 0x5:14s
+**/
+ uint8_t PwrBtnOverridePeriod;
+
+/** Offset 0x02D6 - Power Button Native Mode Disable
+ Diable power button native mode, when 1, this will result in the PMC logic constantly
+ seeing the power button as de-asserted. 0 (default))
+ $EN_DIS
+**/
+ uint8_t DisableNativePowerButton;
+
+/** Offset 0x02D7 - Power Button Debounce Mode
+ Enable interrupt when PWRBTN# is asserted. 0:Disabled, 1:Enabled(default)
+ $EN_DIS
+**/
+ uint8_t PowerButterDebounceMode;
+
+/** Offset 0x02D8 - SDIO_TX_CMD_DLL_CNTL
+ SDIO_TX_CMD_DLL_CNTL. 0x505(Default).
**/
- uint8_t ReservedFspsUpd[45];
+ uint32_t SdioTxCmdCntl;
+
+/** Offset 0x02DC - SDIO_TX_DATA_DLL_CNTL1
+ SDIO_TX_DATA_DLL_CNTL1. 0xE(Default).
+**/
+ uint32_t SdioTxDataCntl1;
+
+/** Offset 0x02E0 - SDIO_TX_DATA_DLL_CNTL2
+ SDIO_TX_DATA_DLL_CNTL2. 0x22272828(Default).
+**/
+ uint32_t SdioTxDataCntl2;
+
+/** Offset 0x02E4 - SDIO_RX_CMD_DATA_DLL_CNTL1
+ SDIO_RX_CMD_DATA_DLL_CNTL1. 0x16161616(Default).
+**/
+ uint32_t SdioRxCmdDataCntl1;
+
+/** Offset 0x02E8 - SDIO_RX_CMD_DATA_DLL_CNTL2
+ SDIO_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default).
+**/
+ uint32_t SdioRxCmdDataCntl2;
+
+/** Offset 0x02EC - SDCARD_TX_CMD_DLL_CNTL
+ SDCARD_TX_CMD_DLL_CNTL. 0x505(Default).
+**/
+ uint32_t SdcardTxCmdCntl;
+
+/** Offset 0x02F0 - SDCARD_TX_DATA_DLL_CNTL1
+ SDCARD_TX_DATA_DLL_CNTL1. 0xA13(Default).
+**/
+ uint32_t SdcardTxDataCntl1;
+
+/** Offset 0x02F4 - SDCARD_TX_DATA_DLL_CNTL2
+ SDCARD_TX_DATA_DLL_CNTL2. 0x24242828(Default).
+**/
+ uint32_t SdcardTxDataCntl2;
+
+/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL1
+ SDCARD_RX_CMD_DATA_DLL_CNTL1. 0x73A3637(Default).
+**/
+ uint32_t SdcardRxCmdDataCntl1;
+
+/** Offset 0x02FC - SDCARD_RX_STROBE_DLL_CNTL
+ SDCARD_RX_STROBE_DLL_CNTL. 0x0(Default).
+**/
+ uint32_t SdcardRxStrobeCntl;
+
+/** Offset 0x0300 - SDCARD_RX_CMD_DATA_DLL_CNTL2
+ SDCARD_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default).
+**/
+ uint32_t SdcardRxCmdDataCntl2;
+
+/** Offset 0x0304 - EMMC_TX_CMD_DLL_CNTL
+ EMMC_TX_CMD_DLL_CNTL. 0x505(Default).
+**/
+ uint32_t EmmcTxCmdCntl;
+
+/** Offset 0x0308 - EMMC_TX_DATA_DLL_CNTL1
+ EMMC_TX_DATA_DLL_CNTL1. 0xC11(Default).
+**/
+ uint32_t EmmcTxDataCntl1;
+
+/** Offset 0x030C - EMMC_TX_DATA_DLL_CNTL2
+ EMMC_TX_DATA_DLL_CNTL2. 0x1C2A2927(Default).
+**/
+ uint32_t EmmcTxDataCntl2;
+
+/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL1
+ EMMC_RX_CMD_DATA_DLL_CNTL1. 0x000D162F(Default).
+**/
+ uint32_t EmmcRxCmdDataCntl1;
+
+/** Offset 0x0314 - EMMC_RX_STROBE_DLL_CNTL
+ EMMC_RX_STROBE_DLL_CNTL. 0x0a0a(Default).
+**/
+ uint32_t EmmcRxStrobeCntl;
+
+/** Offset 0x0318 - EMMC_RX_CMD_DATA_DLL_CNTL2
+ EMMC_RX_CMD_DATA_DLL_CNTL2. 0x1003b(Default).
+**/
+ uint32_t EmmcRxCmdDataCntl2;
+
+/** Offset 0x031C - EMMC_MASTER_DLL_CNTL
+ EMMC_MASTER_DLL_CNTL. 0x001(Default).
+**/
+ uint32_t EmmcMasterSwCntl;
+
+/** Offset 0x0320 - PCIe Selectable De-emphasis
+ When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis
+ for an Upstream component. 1b:-3.5 dB 0b:-6 dB. 0:Disable, 1:Enable(Default).
+**/
+ uint8_t PcieRpSelectableDeemphasis[6];
+
+/** Offset 0x0326
+**/
+ uint8_t ReservedFspsUpd[10];
} __attribute__((packed));
/** Fsp S Test Configuration
**/
struct FSP_S_TEST_CONFIG {
-/** Offset 0x0300
+/** Offset 0x0330
**/
uint32_t Signature;
-/** Offset 0x0304
+/** Offset 0x0334
**/
uint8_t ReservedFspsTestUpd[12];
} __attribute__((packed));
@@ -1341,17 +1499,15 @@ struct FSP_S_TEST_CONFIG {
**/
struct FSP_S_RESTRICTED_CONFIG {
-/** Offset 0x0310
+/** Offset 0x0340
**/
uint32_t Signature;
-/** Offset 0x0314
+/** Offset 0x0344
**/
uint8_t ReservedFspsRestrictedUpd[12];
} __attribute__((packed));
-#define FSPS_UPD_SIGNATURE 0x4450555F53505346 /* 'FSPS_UPD' */
-
/** Fsp S UPD Configuration
**/
struct FSPS_UPD {
@@ -1364,15 +1520,15 @@ struct FSPS_UPD {
**/
struct FSP_S_CONFIG FspsConfig;
-/** Offset 0x0300
+/** Offset 0x0330
**/
struct FSP_S_TEST_CONFIG FspsTestConfig;
-/** Offset 0x0310
+/** Offset 0x0340
**/
struct FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig;
-/** Offset 0x0320
+/** Offset 0x0350
**/
uint16_t UpdTerminator;
} __attribute__((packed));