diff options
Diffstat (limited to 'src/soc/amd/picasso/romstage.c')
-rw-r--r-- | src/soc/amd/picasso/romstage.c | 69 |
1 files changed, 62 insertions, 7 deletions
diff --git a/src/soc/amd/picasso/romstage.c b/src/soc/amd/picasso/romstage.c index bbbc891c5a..329429ef48 100644 --- a/src/soc/amd/picasso/romstage.c +++ b/src/soc/amd/picasso/romstage.c @@ -4,8 +4,10 @@ #include <arch/cpu.h> #include <arch/romstage.h> #include <arch/acpi.h> +#include <cpu/x86/cache.h> #include <cpu/x86/msr.h> #include <cpu/amd/mtrr.h> +#include <console/uart.h> #include <cbmem.h> #include <commonlib/helpers.h> #include <console/console.h> @@ -13,15 +15,69 @@ #include <romstage_handoff.h> #include <elog.h> #include <soc/romstage.h> +#include <soc/mtrr.h> +#include "chip.h" +#include <fsp/api.h> void __weak mainboard_romstage_entry_s3(int s3_resume) { /* By default, don't do anything */ } +/* TODO(b/155426691): Make FSP AGESA leave MTRRs alone */ +static void clear_agesa_mtrrs(void) +{ + disable_cache(); + + picasso_restore_mtrrs(); + + enable_cache(); +} + +void platform_fsp_memory_init_params_cb(FSPM_UPD *mupd, uint32_t version) +{ + FSP_M_CONFIG *mcfg = &mupd->FspmConfig; + const config_t *config = config_of_soc(); + + mcfg->pci_express_base_addr = CONFIG_MMCONF_BASE_ADDRESS; + mcfg->tseg_size = CONFIG_SMM_TSEG_SIZE; + mcfg->serial_port_base = uart_platform_base(CONFIG_UART_FOR_CONSOLE); + mcfg->serial_port_use_mmio = CONFIG(DRIVERS_UART_8250MEM); + mcfg->serial_port_stride = CONFIG(DRIVERS_UART_8250MEM_32) ? 4 : 1; + mcfg->serial_port_baudrate = get_uart_baudrate(); + mcfg->serial_port_refclk = uart_platform_refclk(); + + mcfg->system_config = config->system_config; + + if ((config->slow_ppt_limit) && + (config->fast_ppt_limit) && + (config->slow_ppt_time_constant) && + (config->stapm_time_constant)) { + mcfg->slow_ppt_limit = config->slow_ppt_limit; + mcfg->fast_ppt_limit = config->fast_ppt_limit; + mcfg->slow_ppt_time_constant = config->slow_ppt_time_constant; + mcfg->stapm_time_constant = config->stapm_time_constant; + } + + mcfg->sustained_power_limit = config->sustained_power_limit; + mcfg->prochot_l_deassertion_ramp_time = config->prochot_l_deassertion_ramp_time; + mcfg->thermctl_limit = config->thermctl_limit; + mcfg->psi0_current_limit = config->psi0_current_limit; + mcfg->psi0_soc_current_limit = config->psi0_soc_current_limit; + mcfg->vddcr_soc_voltage_margin = config->vddcr_soc_voltage_margin; + mcfg->vddcr_vdd_voltage_margin = config->vddcr_vdd_voltage_margin; + mcfg->vrm_maximum_current_limit = config->vrm_maximum_current_limit; + mcfg->vrm_soc_maximum_current_limit = config->vrm_soc_maximum_current_limit; + mcfg->vrm_current_limit = config->vrm_current_limit; + mcfg->vrm_soc_current_limit = config->vrm_soc_current_limit; + mcfg->sb_tsi_alert_comparator_mode_en = config->sb_tsi_alert_comparator_mode_en; + mcfg->core_dldo_bypass = config->core_dldo_bypass; + mcfg->min_soc_vid_offset = config->min_soc_vid_offset; + mcfg->aclk_dpm0_freq_400MHz = config->aclk_dpm0_freq_400MHz; +} + asmlinkage void car_stage_entry(void) { - uintptr_t top_of_mem; int s3_resume; post_code(0x40); @@ -37,16 +93,15 @@ asmlinkage void car_stage_entry(void) printk(BIOS_DEBUG, "Family_Model: %08x\n", val); post_code(0x43); - top_of_mem = ALIGN_DOWN(rdmsr(TOP_MEM).lo, 8 * MiB); - backup_top_of_low_cacheable(top_of_mem); + picasso_save_mtrrs(); post_code(0x44); - if (cbmem_recovery(s3_resume)) - printk(BIOS_CRIT, "Failed to recover cbmem\n"); - if (romstage_handoff_init(s3_resume)) - printk(BIOS_ERR, "Failed to set romstage handoff data\n"); + fsp_memory_init(s3_resume); post_code(0x45); + clear_agesa_mtrrs(); + + post_code(0x46); run_ramstage(); post_code(0x50); /* Should never see this post code. */ |