diff options
Diffstat (limited to 'src/soc/amd/glinda/Kconfig')
| -rw-r--r-- | src/soc/amd/glinda/Kconfig | 517 |
1 files changed, 517 insertions, 0 deletions
diff --git a/src/soc/amd/glinda/Kconfig b/src/soc/amd/glinda/Kconfig new file mode 100644 index 0000000000..c11ece9ca3 --- /dev/null +++ b/src/soc/amd/glinda/Kconfig @@ -0,0 +1,517 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# TODO: Evaluate what can be moved to a common directory +# TODO: Update for Glinda + +config SOC_AMD_GLINDA + bool + help + AMD Glinda support + +if SOC_AMD_GLINDA + +config SOC_SPECIFIC_OPTIONS + def_bool y + select ACPI_SOC_NVS + select ARCH_BOOTBLOCK_X86_32 + select ARCH_VERSTAGE_X86_32 if !VBOOT_STARTS_BEFORE_BOOTBLOCK + select ARCH_ROMSTAGE_X86_32 + select ARCH_RAMSTAGE_X86_32 + select ARCH_X86 + select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH + select DRIVERS_USB_ACPI + select DRIVERS_USB_PCI_XHCI + select FSP_COMPRESS_FSP_M_LZMA if !ASYNC_FILE_LOADING + select FSP_COMPRESS_FSP_M_LZ4 if ASYNC_FILE_LOADING + select FSP_COMPRESS_FSP_S_LZ4 + select GENERIC_GPIO_LIB + select HAVE_ACPI_TABLES + select HAVE_CF9_RESET + select HAVE_EM100_SUPPORT + select HAVE_FSP_GOP + select HAVE_SMI_HANDLER + select IDT_IN_EVERY_STAGE + select PARALLEL_MP_AP_WORK + select PLATFORM_USES_FSP2_0 + select PROVIDES_ROM_SHARING + select PSP_SUPPORTS_EFS2_RELATIVE_ADDR if VBOOT_STARTS_BEFORE_BOOTBLOCK + select PSP_VERSTAGE_CCP_DMA if VBOOT_STARTS_BEFORE_BOOTBLOCK + select RESET_VECTOR_IN_RAM + select RTC + select SOC_AMD_COMMON + select SOC_AMD_COMMON_BLOCK_ACP_GEN2 # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPIMMIO # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPI_ALIB # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPI_CPPC # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPI_GPIO # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ACPI_IVRS # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_AOAC # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_APOB # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_APOB_HASH # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_BANKED_GPIOS # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_DATA_FABRIC # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_EMMC # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_GRAPHICS # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_HAS_ESPI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_HAS_ESPI_ALERT_ENABLE # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_I2C # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_I23C_PAD_CTRL # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_IOMMU # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_LPC # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_MCAX # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_NONCAR # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PCI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PCI_MMCONF # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PCIE_GPP_DRIVER # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PM # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PM_CHIPSET_STATE_SAVE # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_PSP_GEN2 # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_SMBUS # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_SMI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_SMM # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_SMU # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_SPI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_UART # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_UCODE # TODO: Check if this is still correct + select SOC_AMD_COMMON_FSP_CCX_CPPC_HOB # TODO: Check if this is still correct + select SOC_AMD_COMMON_FSP_DMI_TABLES # TODO: Check if this is still correct + select SOC_AMD_COMMON_FSP_PCI # TODO: Check if this is still correct + select SSE2 + select UDK_2017_BINDING + select USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM + select USE_FSP_NOTIFY_PHASE_READY_TO_BOOT + select USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE + select VBOOT_DEFINE_WIDEVINE_COUNTERS if VBOOT_STARTS_BEFORE_BOOTBLOCK + select X86_AMD_FIXED_MTRRS + select X86_INIT_NEED_1_SIPI + +config ARCH_ALL_STAGES_X86 + default n + +config CHIPSET_DEVICETREE + string + default "soc/amd/glinda/chipset.cb" + +config EARLY_RESERVED_DRAM_BASE + hex + default 0x2000000 + help + This variable defines the base address of the DRAM which is reserved + for usage by coreboot in early stages (i.e. before ramstage is up). + This memory gets reserved in BIOS tables to ensure that the OS does + not use it, thus preventing corruption of OS memory in case of S3 + resume. + +config EARLYRAM_BSP_STACK_SIZE + hex + default 0x1000 + +config PSP_APOB_DRAM_ADDRESS + hex + default 0x2001000 + help + Location in DRAM where the PSP will copy the AGESA PSP Output + Block. + +config PSP_APOB_DRAM_SIZE + hex + default 0x1E000 + +config PSP_SHAREDMEM_BASE + hex + default 0x201F000 if VBOOT + default 0x0 + help + This variable defines the base address in DRAM memory where PSP copies + the vboot workbuf. This is used in the linker script to have a static + allocation for the buffer as well as for adding relevant entries in + the BIOS directory table for the PSP. + +config PSP_SHAREDMEM_SIZE + hex + default 0x8000 if VBOOT + default 0x0 + help + Sets the maximum size for the PSP to pass the vboot workbuf and + any logs or timestamps back to coreboot. This will be copied + into main memory by the PSP and will be available when the x86 is + started. The workbuf's base depends on the address of the reset + vector. + +config PRE_X86_CBMEM_CONSOLE_SIZE + hex + default 0x1600 + help + Size of the CBMEM console used in PSP verstage. + +config PRERAM_CBMEM_CONSOLE_SIZE + hex + default 0x1600 + help + Increase this value if preram cbmem console is getting truncated + +config CBFS_MCACHE_SIZE + hex + default 0x2000 if VBOOT_STARTS_BEFORE_BOOTBLOCK + +config C_ENV_BOOTBLOCK_SIZE + hex + default 0x10000 + help + Sets the size of the bootblock stage that should be loaded in DRAM. + This variable controls the DRAM allocation size in linker script + for bootblock stage. + +config ROMSTAGE_ADDR + hex + default 0x2040000 + help + Sets the address in DRAM where romstage should be loaded. + +config ROMSTAGE_SIZE + hex + default 0x80000 + help + Sets the size of DRAM allocation for romstage in linker script. + +config FSP_M_ADDR + hex + default 0x20C0000 + help + Sets the address in DRAM where FSP-M should be loaded. cbfstool + performs relocation of FSP-M to this address. + +config FSP_M_SIZE + hex + default 0xC0000 + help + Sets the size of DRAM allocation for FSP-M in linker script. + +config FSP_TEMP_RAM_SIZE + hex + default 0x40000 + help + The amount of coreboot-allocated heap and stack usage by the FSP. + +config VERSTAGE_ADDR + hex + depends on VBOOT_SEPARATE_VERSTAGE + default 0x2180000 + help + Sets the address in DRAM where verstage should be loaded if running + as a separate stage on x86. + +config VERSTAGE_SIZE + hex + depends on VBOOT_SEPARATE_VERSTAGE + default 0x80000 + help + Sets the size of DRAM allocation for verstage in linker script if + running as a separate stage on x86. + +config ASYNC_FILE_LOADING + bool "Loads files from SPI asynchronously" + select COOP_MULTITASKING + select SOC_AMD_COMMON_BLOCK_LPC_SPI_DMA + select CBFS_PRELOAD + help + When enabled, the platform will use the LPC SPI DMA controller to + asynchronously load contents from the SPI ROM. This will improve + boot time because the CPUs can be performing useful work while the + SPI contents are being preloaded. + +config CBFS_CACHE_SIZE + hex + default 0x40000 if CBFS_PRELOAD + +config RO_REGION_ONLY + string + depends on VBOOT_SLOTS_RW_AB || VBOOT_SLOTS_RW_A + default "apu/amdfw" + +config ECAM_MMCONF_BASE_ADDRESS + default 0xF8000000 + +config ECAM_MMCONF_BUS_NUMBER + default 64 + +config MAX_CPUS + int + default 8 if SOC_AMD_GLINDA + default 16 + help + Maximum number of threads the platform can have. + +config CONSOLE_UART_BASE_ADDRESS + depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART + hex + default 0xfedc9000 if UART_FOR_CONSOLE = 0 + default 0xfedca000 if UART_FOR_CONSOLE = 1 + default 0xfedce000 if UART_FOR_CONSOLE = 2 + default 0xfedcf000 if UART_FOR_CONSOLE = 3 + default 0xfedd1000 if UART_FOR_CONSOLE = 4 + +config SMM_TSEG_SIZE + hex + default 0x800000 if HAVE_SMI_HANDLER + default 0x0 + +config SMM_RESERVED_SIZE + hex + default 0x180000 + +config SMM_MODULE_STACK_SIZE + hex + default 0x800 + +config ACPI_BERT + bool "Build ACPI BERT Table" + default y + depends on HAVE_ACPI_TABLES + help + Report Machine Check errors identified in POST to the OS in an + ACPI Boot Error Record Table. + +config ACPI_BERT_SIZE + hex + default 0x4000 if ACPI_BERT + default 0x0 + help + Specify the amount of DRAM reserved for gathering the data used to + generate the ACPI table. + +config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ + int + default 150 + +config DISABLE_SPI_FLASH_ROM_SHARING + def_bool n + help + Instruct the chipset to not honor the EGPIO67_SPI_ROM_REQ pin + which indicates a board level ROM transaction request. This + removes arbitration with board and assumes the chipset controls + the SPI flash bus entirely. + +config DISABLE_KEYBOARD_RESET_PIN + bool + help + Instruct the SoC to not use the state of GPIO_129 as keyboard reset + signal. When this pin is used as GPIO and the keyboard reset + functionality isn't disabled, configuring it as an output and driving + it as 0 will cause a reset. + +config ACPI_SSDT_PSD_INDEPENDENT + bool "Allow core p-state independent transitions" + default y + help + AMD recommends the ACPI _PSD object to be configured to cause + cores to transition between p-states independently. A vendor may + choose to generate _PSD object to allow cores to transition together. + +menu "PSP Configuration Options" + +config AMD_FWM_POSITION_INDEX + int "Firmware Directory Table location (0 to 5)" + range 0 5 + default 0 if BOARD_ROMSIZE_KB_512 + default 1 if BOARD_ROMSIZE_KB_1024 + default 2 if BOARD_ROMSIZE_KB_2048 + default 3 if BOARD_ROMSIZE_KB_4096 + default 4 if BOARD_ROMSIZE_KB_8192 + default 5 if BOARD_ROMSIZE_KB_16384 + help + Typically this is calculated by the ROM size, but there may + be situations where you want to put the firmware directory + table in a different location. + 0: 512 KB - 0xFFFA0000 + 1: 1 MB - 0xFFF20000 + 2: 2 MB - 0xFFE20000 + 3: 4 MB - 0xFFC20000 + 4: 8 MB - 0xFF820000 + 5: 16 MB - 0xFF020000 + +comment "AMD Firmware Directory Table set to location for 512KB ROM" + depends on AMD_FWM_POSITION_INDEX = 0 +comment "AMD Firmware Directory Table set to location for 1MB ROM" + depends on AMD_FWM_POSITION_INDEX = 1 +comment "AMD Firmware Directory Table set to location for 2MB ROM" + depends on AMD_FWM_POSITION_INDEX = 2 +comment "AMD Firmware Directory Table set to location for 4MB ROM" + depends on AMD_FWM_POSITION_INDEX = 3 +comment "AMD Firmware Directory Table set to location for 8MB ROM" + depends on AMD_FWM_POSITION_INDEX = 4 +comment "AMD Firmware Directory Table set to location for 16MB ROM" + depends on AMD_FWM_POSITION_INDEX = 5 + +config AMDFW_CONFIG_FILE + string "AMD PSP Firmware config file" + default "src/soc/amd/glinda/fw.cfg" + help + Specify the path/location of AMD PSP Firmware config file. + +config PSP_DISABLE_POSTCODES + bool "Disable PSP post codes" + help + Disables the output of port80 post codes from PSP. + +config PSP_POSTCODES_ON_ESPI + bool "Use eSPI bus for PSP post codes" + default y + depends on !PSP_DISABLE_POSTCODES + help + Select to send PSP port80 post codes on eSPI bus. + If not selected, PSP port80 codes will be sent on LPC bus. + +config PSP_LOAD_MP2_FW + bool + default n + help + Include the MP2 firmwares and configuration into the PSP build. + + If unsure, answer 'n' + +config PSP_UNLOCK_SECURE_DEBUG + bool "Unlock secure debug" + default y + help + Select this item to enable secure debug options in PSP. + +config HAVE_PSP_WHITELIST_FILE + bool "Include a debug whitelist file in PSP build" + default n + help + Support secured unlock prior to reset using a whitelisted + serial number. This feature requires a signed whitelist image + and bootloader from AMD. + + If unsure, answer 'n' + +config PSP_WHITELIST_FILE + string "Debug whitelist file path" + depends on HAVE_PSP_WHITELIST_FILE + default "site-local/3rdparty/amd_blobs/glinda/PSP/wtl-mrg.sbin" + +config HAVE_SPL_FILE + bool "Have a mainboard specific SPL table file" + default n + help + Have a mainboard specific Security Patch Level (SPL) table file. SPL file + is required to support PSP FW anti-rollback and needs to be created by AMD. + The default SPL file applies to all boards that use the concerned SoC and + is dropped under 3rdparty/blobs. The mainboard specific SPL file override + can be applied through SPL_TABLE_FILE config. + + If unsure, answer 'n' + +config SPL_TABLE_FILE + string "SPL table file" + depends on HAVE_SPL_FILE + default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/TypeId0x55_SplTableBl_MRG.sbin" + +config HAVE_SPL_RW_AB_FILE + bool "Have a separate mainboard-specific SPL file in RW A/B partitions" + default n + depends on HAVE_SPL_FILE + depends on VBOOT_SLOTS_RW_AB + help + Have separate mainboard-specific Security Patch Level (SPL) table + file for the RW A/B FMAP partitions. See the help text of + HAVE_SPL_FILE for a more detailed description. + +config SPL_RW_AB_TABLE_FILE + string "Separate SPL table file for RW A/B partitions" + depends on HAVE_SPL_RW_AB_FILE + default "3rdparty/blobs/mainboard/\$(CONFIG_MAINBOARD_DIR)/TypeId0x55_SplTableBl_MRG.sbin" + +config PSP_SOFTFUSE_BITS + string "PSP Soft Fuse bits to enable" + default "34 28 6" + help + Space separated list of Soft Fuse bits to enable. + Bit 0: Enable secure debug (Set by PSP_UNLOCK_SECURE_DEBUG) + Bit 7: Disable PSP postcodes on Renoir and newer chips only + (Set by PSP_DISABLE_PORT80) + Bit 15: PSP debug output destination: + 0=SoC MMIO UART, 1=IO port 0x3F8 + Bit 29: Disable MP2 firmware loading (Set by PSP_LOAD_MP2_FW) + + See #55758 (NDA) for additional bit definitions. + +config PSP_VERSTAGE_FILE + string "Specify the PSP_verstage file path" + depends on VBOOT_STARTS_BEFORE_BOOTBLOCK + default "\$(obj)/psp_verstage.bin" + help + Add psp_verstage file to the build & PSP Directory Table + +config PSP_VERSTAGE_SIGNING_TOKEN + string "Specify the PSP_verstage Signature Token file path" + depends on VBOOT_STARTS_BEFORE_BOOTBLOCK + default "" + help + Add psp_verstage signature token to the build & PSP Directory Table + +endmenu + +config VBOOT + select VBOOT_VBNV_CMOS + select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH + +config VBOOT_STARTS_BEFORE_BOOTBLOCK + def_bool n + depends on VBOOT + select ARCH_VERSTAGE_ARMV7 + help + Runs verstage on the PSP. Only available on + certain ChromeOS branded parts from AMD. + +config VBOOT_HASH_BLOCK_SIZE + hex + default 0x9000 + depends on VBOOT_STARTS_BEFORE_BOOTBLOCK + help + Because the bulk of the time in psp_verstage to hash the RO cbfs is + spent in the overhead of doing svc calls, increasing the hash block + size significantly cuts the verstage hashing time as seen below. + + 4k takes 180ms + 16k takes 44ms + 32k takes 33.7ms + 36k takes 32.5ms + There's actually still room for an even bigger stack, but we've + reached a point of diminishing returns. + +config CMOS_RECOVERY_BYTE + hex + default 0x51 + depends on VBOOT_STARTS_BEFORE_BOOTBLOCK + help + If the workbuf is not passed from the PSP to coreboot, set the + recovery flag and reboot. The PSP will read this byte, mark the + recovery request in VBNV, and reset the system into recovery mode. + + This is the byte before the default first byte used by VBNV + (0x26 + 0x0E - 1) + +if VBOOT_SLOTS_RW_AB && VBOOT_STARTS_BEFORE_BOOTBLOCK + +config RWA_REGION_ONLY + string + default "apu/amdfw_a" + help + Add a space-delimited list of filenames that should only be in the + RW-A section. + +config RWB_REGION_ONLY + string + default "apu/amdfw_b" + help + Add a space-delimited list of filenames that should only be in the + RW-B section. + +endif # VBOOT_SLOTS_RW_AB && VBOOT_STARTS_BEFORE_BOOTBLOCK + +endif # SOC_AMD_REMBRANDT_BASE |