diff options
Diffstat (limited to 'src/northbridge/motorola/mpc107/mpc107.c')
| -rw-r--r-- | src/northbridge/motorola/mpc107/mpc107.c | 259 |
1 files changed, 252 insertions, 7 deletions
diff --git a/src/northbridge/motorola/mpc107/mpc107.c b/src/northbridge/motorola/mpc107/mpc107.c index 77142c4999..d9f859f02b 100644 --- a/src/northbridge/motorola/mpc107/mpc107.c +++ b/src/northbridge/motorola/mpc107/mpc107.c @@ -23,28 +23,273 @@ #include <printk.h> #include <arch/io.h> #include <arch/pciconf.h> +#include <timer.h> +#include <clock.h> +#include <mem.h> #include "i2c.h" #include "mpc107.h" -#include <timer.h> #define NUM_DIMMS 1 #define NUM_BANKS 2 +void mpc107_init(void); + void sdram_init(void) { - sdram_dimm_info sdram_dimms[NUM_DIMMS]; - sdram_bank_info sdram_banks[NUM_BANKS]; + struct sdram_dimm_info dimms[NUM_DIMMS]; + struct sdram_bank_info banks[NUM_BANKS]; + + mpc107_init(); + mpc107_probe_dimms(NUM_DIMMS, dimms, banks); + (void)mpc107_config_memory(NUM_BANKS, banks, 2); +} + +struct mem_range * +sizeram(void) +{ + int i; + struct sdram_dimm_info dimms[NUM_DIMMS]; + struct sdram_bank_info banks[NUM_BANKS]; + static struct mem_range meminfo; + + meminfo.basek = 0; + meminfo.sizek = 0; + + mpc107_probe_dimms(NUM_DIMMS, dimms, banks); + + for (i = 0; i < NUM_BANKS; i++) + meminfo.sizek += banks[i].size; - hostbridge_probe_dimms(NUM_DIMMS, sdram_dimms, sdram_banks); - (void)hostbridge_config_memory(NUM_BANKS, sdram_banks, 2); + meminfo.sizek >>= 10; + + return &meminfo; +} + +void +mpc107_init(void) +{ + uint16_t reg16; + uint32_t reg32; + + /* + * PCI Cmd + */ + pci_ppc_write_config16(0, 0, 0x04, 0x06); + + /* + * PCI Stat + */ + reg16 = pci_ppc_read_config16(0, 0, 0x06); + reg16 |= 0xffff; + pci_ppc_write_config16(0, 0, 0x06, reg16); + + /* + * PICR1 + * 0x00400000 burst read wait states = 1 + * 0x00040000 processor type = 603/750 + * 0x00002000 enable LocalBusSlave + * 0x00001000 enable Flash write + * 0x00000800 enable MCP* assertion + * 0x00000400 enable TEA* assertion + * 0x00000200 enable data bus parking + * 0x00000040 enable PCI store gathering + * 0x00000010 enable loop-snoop + * 0x00000008 enable address bus parking + * 0x00000004 enable speculative PCI reads + */ + reg32 = pci_ppc_read_config32(0, 0, 0xa8); + + /* + * Preserve RCS0/Addr Map bits + */ + reg32 &= 0x11; + + reg32 |= 0xff041a18; + pci_ppc_write_config32(0, 0, 0xa8, reg32); + + /* + * PICR2 + * 0x20000000 no Serialize Config cycles + * 0x08000000 No PCI Snoop cycles + * 0x04000000 FF0 is Local ROM + * 0x02000000 Flash write lockout + * 0x00000000 snoop wt states = 0 + * 0x00040000 snoop wt states = 1 + * 0x00080000 snoop wt states = 2 + * 0x000c0000 snoop wt states = 3 + * 0x00000000 addr phase wt states = 0 + * 0x00000004 addr phase wt states = 1 + * 0x00000008 addr phase wt states = 2 + * 0x0000000c addr phase wt states = 3 + */ + + pci_ppc_write_config32(0, 0, 0xac, 0x04040004); + + /* + * EUMBBAR + */ + pci_ppc_write_config32(0, 0, 0x78, 0xfc000000); + + /* + * MCCR1 - Set MEMGO bit later! + * 0x75800000 Safe local ROM = 10+3 clocks + * 0x73800000 Fast local ROM = 7+3 clocks + * 0x00100000 Burst ROM/Flash enable + * 0x00040000 Self-refresh enable + * 0x00020000 EDO/FP enable (else SDRAM) + * 0x00010000 Parity check + * 0x0000FFFF 16Mbit/2 bank SDRAM + * 0x00005555 64Mbit/2 bank SDRAM + * 0x00000000 64Mbit/4 bank SDRAM + */ + reg32 = pci_ppc_read_config32(0, 0, 0xf0); + reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */ + reg32 |= 0x75800000; + pci_ppc_write_config32(0, 0, 0xf0, reg32); + + /* + * MCCR2 + * 0x40000000 TS_WAIT_TIMER = 3 clocks + * 0x04000000 ASRISE = 2 clocks + * 0x00400000 ASFALL = 2 clocks + * 0x00100000 SDRAM parity (else ECC) + * 0x00080000 SDRAM inline writes + * 0x00040000 SDRAM inline reads + * 0x00020000 ECC enable + * 0x00010000 EDO (else FP) + * 0x000006b8 Refresh 33MHz bus + * 0x0000035c Refresh 66MHz bus + * 0x0000023c Refresh 100MHz bus + * 0x000001ac Refresh 133MHz bus + * 0x00000002 Reserve a page + * 0x00000001 RWM parity + */ + pci_ppc_write_config32(0, 0, 0xf4, 0x0440023c); + + /* + * MCCR3 + * 0x70000000 BSTOPRE_M = 7 + * 0x08000000 REFREC = 8 clocks + * 0x00400000 RDLAT = 4 clocks + * 0x00300000 RDLAT = 3 clocks + */ + pci_ppc_write_config32(0, 0, 0xf8, 0x78400000); + + /* + * MCCR4 + * 0x30000000 PRETOACT = 3 clocks + * 0x05000000 ACTOPRE = 5 clocks + * 0x00800000 Enable 8-beat burst (32-bit bus) + * 0x00400000 Enable Inline ECC/Parity + * 0x00200000 Enable Extended ROM (RCS2/RCS3) + * 0x00100000 Registered buffers + * 0x00000000 BSTOPRE_U = 0 + * 0x00020000 Change RCS1 to 8-bit mode + * 0x00008000 Registered DIMMs + * 0x00003000 CAS Latencey (CL=3) + * 0x00002000 CAS Latencey (CL=2) + * 0x00000200 Sequential wrap/4-beat burst + * 0x00000030 Reserve a page + * 0x00000009 RWM parity + */ + pci_ppc_write_config32(0, 0, 0xfc, 0x35323239); + + /* + * MSAR1/MSAR2/MESAR1/MESAR2 + */ + pci_ppc_write_config32(0, 0, 0x80, 0x60402000); + pci_ppc_write_config32(0, 0, 0x84, 0xe0c0a080); + pci_ppc_write_config32(0, 0, 0x88, 0x00000000); + pci_ppc_write_config32(0, 0, 0x8c, 0x00000000); + + /* + * MEAR1/MEAR2/MEEAR1/MEEAR2 + */ + pci_ppc_write_config32(0, 0, 0x90, 0x7f5f3f1f); + pci_ppc_write_config32(0, 0, 0x94, 0xffdfbf9f); + pci_ppc_write_config32(0, 0, 0x98, 0x00000000); + pci_ppc_write_config32(0, 0, 0x9c, 0x00000000); + + /* + * ODCR + * 0x80 PCI I/O 50 ohms + * 0x40 CPU I/O 50 ohms + * 0x30 Mem I/O 8 ohms + * 0x20 Mem I/O 13 ohms + * 0x10 Mem I/O 20 ohms + * 0x00 Mem I/O 40 ohms + * 0x0c PCIClk 8 ohms + * 0x08 PCIClk 13 ohms + * 0x04 PCIClk 20 ohms + * 0x00 PCIClk 40 ohms + * 0x03 MemClk 8 ohms + * 0x02 MemClk 13.3 ohms + * 0x01 MemClk 20 ohms + * 0x00 MemClk 40 ohms + */ + pci_ppc_write_config8(0, 0, 0x73, 0xc0); + + /* + * CDCR + * 0x8000 PCI_SYNC_OUT disabled + * 0x7c00 PCI_CLK disabled + * 0x0300 CPU_CLK 8 ohms + * 0x0200 CPU_CLK 13 ohms + * 0x0100 CPU_CLK 20 ohms + * 0x0000 CPU_CLK 40 ohms + * 0x0080 SDRAM_SYNC_OUT disabled + * 0x0078 SDRAM_CLK disabled + * 0x0004 CPU_CLK0 disabled + * 0x0002 CPU_CLK1 disabled + * 0x0001 CPU_CLK2 disabled + */ + pci_ppc_write_config16(0, 0, 0x74, 0xfc01); + + /* + * MDCR + * 0x80 MCP 1=open-drain, 0=output + * 0x40 SRESET 1=open-drain, 0=output + * 0x20 QACK 1=high-Z, 0=output + */ + pci_ppc_write_config8(0, 0, 0x76, 0x60); + + /* + * MBEN + * 0x03 Enable banks 0 and 1 + */ + pci_ppc_write_config8(0, 0, 0xa0, 0x03); + + /* + * PGMAX + * 0x32 33MHz value w/ROMFAL=8 + */ + pci_ppc_write_config8(0, 0, 0xa3, 0x32); + + /* + * Wait 200us + */ + udelay(200); + + /* + * Now set memgo bit in MCCR1 + */ + reg32 = pci_ppc_read_config32(0, 0, 0xf0); + reg32 |= 0x00080000; /* MEMGO=1 */ + pci_ppc_write_config32(0, 0, 0xf0, reg32); + + /* + * Wait again + */ + + udelay(10000); } /* * Configure memory settings. */ unsigned long -hostbridge_config_memory(int no_banks, sdram_bank_info * bank, int for_real) +mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real) { int i, j; char ignore[8]; @@ -421,7 +666,7 @@ i2c_fn mpc107_i2c_fn = { * Find dimm information. */ void -hostbridge_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank) +mpc107_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank) { unsigned char data[256]; unsigned dimm; |