diff options
Diffstat (limited to 'src/northbridge/intel/sandybridge/gma.c')
-rw-r--r-- | src/northbridge/intel/sandybridge/gma.c | 59 |
1 files changed, 21 insertions, 38 deletions
diff --git a/src/northbridge/intel/sandybridge/gma.c b/src/northbridge/intel/sandybridge/gma.c index 499f347007..9a8b6317ef 100644 --- a/src/northbridge/intel/sandybridge/gma.c +++ b/src/northbridge/intel/sandybridge/gma.c @@ -374,19 +374,11 @@ static void gma_pm_init_pre_vbios(struct device *dev) if (bridge_silicon_revision() < IVB_STEP_C0) { /* 1: Enable force wake */ gtt_write(0xa18c, 0x00000001); - if (!gtt_poll(0x130090, (1 << 0), (1 << 0))) - return; + gtt_poll(0x130090, (1 << 0), (1 << 0)); } else { gtt_write(0xa180, 1 << 5); gtt_write(0xa188, 0xffff0001); - if (!gtt_poll(0x130040, (1 << 0), (1 << 0))) - return; - /* - * HACK: also poll on 0x130090, for some reason graphics does - * not work on all SKUs unless this register is polled at boot. - */ - if (!gtt_poll(0x130090, (1 << 0), (1 << 0))) - return; + gtt_poll(0x130040, (1 << 0), (1 << 0)); } if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_SNB) { @@ -432,7 +424,7 @@ static void gma_pm_init_pre_vbios(struct device *dev) gtt_write_powermeter(ivb_pm_gt2_17w); } else if ((tdp >= 25) && (tdp <= 35)) { /* 25W-35W */ - printk(BIOS_DEBUG, "IVB GT2 35W " + printk(BIOS_DEBUG, "IVB GT2 25W-35W " "Power Meter Weights\n"); gtt_write_powermeter(ivb_pm_gt2_35w); } else { @@ -472,8 +464,7 @@ static void gma_pm_init_pre_vbios(struct device *dev) reg32 &= 0xf; reg32 |= (1 << 1); gtt_write(0x941c, reg32); - if (!gtt_poll(0x941c, (1 << 1), (0 << 1))) - return; + gtt_poll(0x941c, (1 << 1), (0 << 1)); } if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { @@ -489,15 +480,13 @@ static void gma_pm_init_pre_vbios(struct device *dev) } /* 7 */ - if (!gtt_poll(0x138124, (1 << 31), (0 << 31))) - return; - gtt_write(0x138128, 0x00000029); /* Mailbox Data */ - gtt_write(0x138124, 0x80000004); /* Mailbox Cmd for RC6 VID */ - if (!gtt_poll(0x138124, (1 << 31), (0 << 31))) - return; - gtt_write(0x138124, 0x8000000a); /* Mailbox Cmd to clear RC6 count */ - if (!gtt_poll(0x138124, (1 << 31), (0 << 31))) - return; + if (gtt_poll(0x138124, (1 << 31), (0 << 31))) { + gtt_write(0x138128, 0x00000029); /* Mailbox Data */ + gtt_write(0x138124, 0x80000004); /* Mailbox Cmd for RC6 VID */ + if (gtt_poll(0x138124, (1 << 31), (0 << 31))) + gtt_write(0x138124, 0x8000000a); + gtt_poll(0x138124, (1 << 31), (0 << 31)); + } /* 8 */ gtt_write(0xa090, 0x00000000); /* RC Control */ @@ -530,8 +519,13 @@ static void gma_pm_init_pre_vbios(struct device *dev) /* 11a: Enable Render Standby (RC6) */ if ((bridge_silicon_revision() & BASE_REV_MASK) == BASE_REV_IVB) { - /* on IVB: also enable DeepRenderStandby */ - gtt_write(0xa090, 0x88060000); /* HW RC Control */ + /* + * IvyBridge should also support DeepRenderStandby. + * + * Unfortunately it does not work reliably on all SKUs so + * disable it here and it can be enabled by the kernel. + */ + gtt_write(0xa090, 0x88040000); /* HW RC Control */ } else { gtt_write(0xa090, 0x88040000); /* HW RC Control */ } @@ -566,22 +560,11 @@ static void gma_pm_init_post_vbios(struct device *dev) /* 15: Deassert Force Wake */ if (bridge_silicon_revision() < IVB_STEP_C0) { gtt_write(0xa18c, gtt_read(0xa18c) & ~1); - if (!gtt_poll(0x130090, (1 << 0), (0 << 0))) { - return; - } + gtt_poll(0x130090, (1 << 0), (0 << 0)); } else { gtt_write(0xa188, 0x1fffe); - if (!gtt_poll(0x130040, (1 << 0), (0 << 0))) { - return; - } - /* - * HACK: also poll on 0x130090, for some reason graphics does - * not work on all SKUs unless this register is polled at boot. - */ - if (!gtt_poll(0x130090, (1 << 0), (0 << 0))) { - return; - } - gtt_write(0xa188, gtt_read(0xa188) | 1); + if (gtt_poll(0x130040, (1 << 0), (0 << 0))) + gtt_write(0xa188, gtt_read(0xa188) | 1); } /* 16: SW RC Control */ |