summaryrefslogtreecommitdiff
path: root/src/northbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/northbridge/amd')
-rw-r--r--src/northbridge/amd/amdmct/mct/mct_d.c20
-rw-r--r--src/northbridge/amd/amdmct/mct/mctdqs_d.c2
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mct_d.c12
-rw-r--r--src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c2
4 files changed, 18 insertions, 18 deletions
diff --git a/src/northbridge/amd/amdmct/mct/mct_d.c b/src/northbridge/amd/amdmct/mct/mct_d.c
index 3c8506429c..d73bd7d75a 100644
--- a/src/northbridge/amd/amdmct/mct/mct_d.c
+++ b/src/northbridge/amd/amdmct/mct/mct_d.c
@@ -30,7 +30,7 @@
* ordinarily in 64-bit mode.
*
* Trc precision does not use extra Jedec defined fractional component.
- * InsteadTrc (course) is rounded up to nearest 1 ns.
+ * Instead Trc (course) is rounded up to nearest 1 ns.
*
* Mini and Micro DIMM not supported. Only RDIMM, UDIMM, SO-DIMM defined types
* supported.
@@ -183,7 +183,7 @@ static void mctAutoInitMCT_D(struct MCTStatStruc *pMCTstat,
* on setup options). It is the responsibility of PCI subsystem to
* create an uncacheable IO region below 4GB and to adjust TOP_MEM
* downward prior to any IO mapping or accesses. It is the same
- * responsibility of the CPU sub-system prior toaccessing LAPIC.
+ * responsibility of the CPU sub-system prior to accessing LAPIC.
*
* Slot Number is an external convention, and is determined by OEM with
* accompanying silk screening. OEM may choose to use Slot number
@@ -655,7 +655,7 @@ static void MCTMemClr_D(struct MCTStatStruc *pMCTstat,
{
/* Initiates a memory clear operation for all node. The mem clr
- * is done in paralel. After the memclr is complete, all processors
+ * is done in parallel. After the memclr is complete, all processors
* status are checked to ensure that memclr has completed.
*/
u8 Node;
@@ -856,7 +856,7 @@ static void StartupDCT_D(struct MCTStatStruc *pMCTstat,
* HW memory clear process that the chip is capable of. The sooner
* that dram init is set for all nodes, the faster the memory system
* initialization can complete. Thus, the init loop is unrolled into
- * two loops so as to start the processeses for non BSP nodes sooner.
+ * two loops so as to start the processes for non BSP nodes sooner.
* This procedure will not wait for the process to finish.
* Synchronization is handled elsewhere.
*/
@@ -878,7 +878,7 @@ static void StartupDCT_D(struct MCTStatStruc *pMCTstat,
reg = 0x78 + reg_off;
val = Get_NB32(dev, reg);
/* Setting this bit forces a 1T window with hard left
- * pass/fail edge and a probabalistic right pass/fail
+ * pass/fail edge and a probabilistic right pass/fail
* edge. LEFT edge is referenced for final
* receiver enable position.*/
val |= 1 << DqsRcvEnTrain;
@@ -1038,7 +1038,7 @@ static u8 AutoCycTiming_D(struct MCTStatStruc *pMCTstat,
} else {
byte = mctRead_SPD(smbaddr, SPD_TRCRFC);
if (byte & 0xF0) {
- val++; /* round up in case fractional extention is non-zero.*/
+ val++; /* round up in case fractional extension is non-zero.*/
}
}
if (Trc < val)
@@ -1496,7 +1496,7 @@ static u8 AutoConfig_D(struct MCTStatStruc *pMCTstat,
DramConfigMisc = 0;
DramConfigMisc2 = 0;
- /* set bank addessing and Masks, plus CS pops */
+ /* set bank addressing and Masks, plus CS pops */
SPDSetBanks_D(pMCTstat, pDCTstat, dct);
if (pDCTstat->ErrCode == SC_StopError)
goto AutoConfig_exit;
@@ -1582,7 +1582,7 @@ static u8 AutoConfig_D(struct MCTStatStruc *pMCTstat,
}
if (!(Status & (1 << SB_Registered)))
- DramConfigLo |= 1 << UnBuffDimm; /* Unbufferd DIMMs */
+ DramConfigLo |= 1 << UnBuffDimm; /* Unbuffered DIMMs */
if (mctGet_NVbits(NV_ECC_CAP))
if (Status & (1 << SB_ECCDIMMs))
@@ -3405,7 +3405,7 @@ static void SetODTTriState(struct MCTStatStruc *pMCTstat,
if (pDCTstat->CSPresent & (1 << cs)) {
odt &= ~(1 << (cs / 2));
- /* if quad-rank capable platform clear adtitional pins */
+ /* if quad-rank capable platform clear additional pins */
if (max_dimms != MAX_CS_SUPPORTED) {
if (pDCTstat->CSPresent & (1 << (cs + 1)))
odt &= ~(4 << (cs / 2));
@@ -3768,7 +3768,7 @@ static void mct_BeforeDQSTrain_D(struct MCTStatStruc *pMCTstat,
* Silicon Status: Fixed In Rev B0
*
* Bug#15880: Determine validity of reset settings for DDR PHY timing.
- * Solutiuon: At least, set WrDqs fine delay to be 0 for DDR2 training.
+ * Solution: At least, set WrDqs fine delay to be 0 for DDR2 training.
*/
for (Node = 0; Node < 8; Node++) {
diff --git a/src/northbridge/amd/amdmct/mct/mctdqs_d.c b/src/northbridge/amd/amdmct/mct/mctdqs_d.c
index 26205200fd..3a13c17103 100644
--- a/src/northbridge/amd/amdmct/mct/mctdqs_d.c
+++ b/src/northbridge/amd/amdmct/mct/mctdqs_d.c
@@ -479,7 +479,7 @@ static void TrainDQSPos_D(struct MCTStatStruc *pMCTstat,
continue;
}
- BanksPresent = 1; /* flag for atleast one bank is present */
+ BanksPresent = 1; /* flag for at least one bank is present */
TestAddr = mct_GetMCTSysAddr_D(pMCTstat, pDCTstat, pDCTstat->Channel, ChipSel, &valid);
if (!valid) {
print_debug_dqs("\t\t\t\tAddress not supported on current CS ", TestAddr, 4);
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mct_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mct_d.c
index fcbc6b3780..53aed58447 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mct_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mct_d.c
@@ -656,7 +656,7 @@ static void MCTMemClr_D(struct MCTStatStruc *pMCTstat,
{
/* Initiates a memory clear operation for all node. The mem clr
- * is done in paralel. After the memclr is complete, all processors
+ * is done in parallel. After the memclr is complete, all processors
* status are checked to ensure that memclr has completed.
*/
u8 Node;
@@ -868,7 +868,7 @@ static void StartupDCT_D(struct MCTStatStruc *pMCTstat,
* HW memory clear process that the chip is capable of. The sooner
* that dram init is set for all nodes, the faster the memory system
* initialization can complete. Thus, the init loop is unrolled into
- * two loops so as to start the processeses for non BSP nodes sooner.
+ * two loops so as to start the processes for non BSP nodes sooner.
* This procedure will not wait for the process to finish.
* Synchronization is handled elsewhere.
*/
@@ -1520,7 +1520,7 @@ static u8 AutoConfig_D(struct MCTStatStruc *pMCTstat,
DramConfigMisc = 0;
DramConfigMisc2 = 0;
- /* set bank addessing and Masks, plus CS pops */
+ /* set bank addressing and Masks, plus CS pops */
SPDSetBanks_D(pMCTstat, pDCTstat, dct);
if (pDCTstat->ErrCode == SC_StopError)
goto AutoConfig_exit;
@@ -1547,7 +1547,7 @@ static u8 AutoConfig_D(struct MCTStatStruc *pMCTstat,
else
val = 6;
DramControl &= ~0xFF;
- DramControl |= val; /* RdPrtInit = 6 for Cx CPU */
+ DramControl |= val; /* RdPtrInit = 6 for Cx CPU */
if (mctGet_NVbits(NV_CLKHZAltVidC3))
DramControl |= 1<<16; /* check */
@@ -1570,7 +1570,7 @@ static u8 AutoConfig_D(struct MCTStatStruc *pMCTstat,
}
if (!(Status & (1 << SB_Registered)))
- DramConfigLo |= 1 << UnBuffDimm; /* Unbufferd DIMMs */
+ DramConfigLo |= 1 << UnBuffDimm; /* Unbuffered DIMMs */
if (mctGet_NVbits(NV_ECC_CAP))
if (Status & (1 << SB_ECCDIMMs))
@@ -3511,7 +3511,7 @@ static void mct_BeforeDQSTrain_D(struct MCTStatStruc *pMCTstat,
* Silicon Status: Fixed In Rev B0
*
* Bug#15880: Determine validity of reset settings for DDR PHY timing.
- * Solutiuon: At least, set WrDqs fine delay to be 0 for DDR3 training.
+ * Solution: At least, set WrDqs fine delay to be 0 for DDR3 training.
*/
for (Node = 0; Node < 8; Node++) {
pDCTstat = pDCTstatA + Node;
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
index c853b88ff6..953f7470f6 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
@@ -481,7 +481,7 @@ static void TrainDQSPos_D(struct MCTStatStruc *pMCTstat,
continue;
}
- BanksPresent = 1; /* flag for atleast one bank is present */
+ BanksPresent = 1; /* flag for at least one bank is present */
TestAddr = mct_GetMCTSysAddr_D(pMCTstat, pDCTstat, pDCTstat->Channel, ChipSel, &valid);
if (!valid) {
print_debug_dqs("\t\t\t\tAddress not supported on current CS ", TestAddr, 4);