diff options
Diffstat (limited to 'src/northbridge/amd/amdmct/mct_ddr3/mct_d.h')
| -rw-r--r-- | src/northbridge/amd/amdmct/mct_ddr3/mct_d.h | 220 |
1 files changed, 110 insertions, 110 deletions
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mct_d.h b/src/northbridge/amd/amdmct/mct_ddr3/mct_d.h index e1d9da53fb..c42e452300 100644 --- a/src/northbridge/amd/amdmct/mct_ddr3/mct_d.h +++ b/src/northbridge/amd/amdmct/mct_ddr3/mct_d.h @@ -33,16 +33,16 @@ #define PT_C3 5 #define PT_FM2 6 -#define J_MIN 0 /* j loop constraint. 1=CL 2.0 T*/ -#define J_MAX 5 /* j loop constraint. 5=CL 7.0 T*/ -#define K_MIN 1 /* k loop constraint. 1=200 MHz*/ -#define K_MAX 5 /* k loop constraint. 5=533 MHz*/ -#define CL_DEF 2 /* Default value for failsafe operation. 2=CL 4.0 T*/ -#define T_DEF 1 /* Default value for failsafe operation. 1=5ns (cycle time)*/ - -#define BSCRate 1 /* reg bit field=rate of dram scrubber for ecc*/ +#define J_MIN 0 /* j loop constraint. 1 = CL 2.0 T*/ +#define J_MAX 5 /* j loop constraint. 5 = CL 7.0 T*/ +#define K_MIN 1 /* k loop constraint. 1 = 200 MHz*/ +#define K_MAX 5 /* k loop constraint. 5 = 533 MHz*/ +#define CL_DEF 2 /* Default value for failsafe operation. 2 = CL 4.0 T*/ +#define T_DEF 1 /* Default value for failsafe operation. 1 = 5ns (cycle time)*/ + +#define BSCRate 1 /* reg bit field = rate of dram scrubber for ecc*/ /* memory initialization (ecc and check-bits).*/ - /* 1=40 ns/64 bytes.*/ + /* 1 = 40 ns/64 bytes.*/ #define FirstPass 1 /* First pass through RcvEn training*/ #define SecondPass 2 /* Second pass through Rcven training*/ @@ -336,7 +336,7 @@ struct DCTStatStruc { /* A per Node structure*/ /* DCTStatStruct_F - start */ u8 Node_ID; /* Node ID of current controller */ uint8_t Internal_Node_ID; /* Internal Node ID of the current controller */ - uint8_t Dual_Node_Package; /* 1=Dual node package (G34) */ + uint8_t Dual_Node_Package; /* 1 = Dual node package (G34) */ uint8_t stopDCT[2]; /* Set if the DCT will be stopped */ u8 ErrCode; /* Current error condition of Node 0= no error @@ -353,7 +353,7 @@ struct DCTStatStruc { /* A per Node structure*/ /* SPD address of..MB2_CS_L[0,1]*/ /* SPD address of..MA3_CS_L[0,1]*/ /* SPD address of..MB3_CS_L[0,1]*/ - u16 DIMMPresent; /*For each bit n 0..7, 1=DIMM n is present. + u16 DIMMPresent; /*For each bit n 0..7, 1 = DIMM n is present. DIMM# Select Signal 0 MA0_CS_L[0,1] 1 MB0_CS_L[0,1] @@ -363,15 +363,15 @@ struct DCTStatStruc { /* A per Node structure*/ 5 MB2_CS_L[0,1] 6 MA3_CS_L[0,1] 7 MB3_CS_L[0,1]*/ - u16 DIMMValid; /* For each bit n 0..7, 1=DIMM n is valid and is/will be configured*/ - u16 DIMMMismatch; /* For each bit n 0..7, 1=DIMM n is mismatched, channel B is always considered the mismatch */ - u16 DIMMSPDCSE; /* For each bit n 0..7, 1=DIMM n SPD checksum error*/ - u16 DimmECCPresent; /* For each bit n 0..7, 1=DIMM n is ECC capable.*/ - u16 DimmPARPresent; /* For each bit n 0..7, 1=DIMM n is ADR/CMD Parity capable.*/ - u16 Dimmx4Present; /* For each bit n 0..7, 1=DIMM n contains x4 data devices.*/ - u16 Dimmx8Present; /* For each bit n 0..7, 1=DIMM n contains x8 data devices.*/ - u16 Dimmx16Present; /* For each bit n 0..7, 1=DIMM n contains x16 data devices.*/ - u16 DIMM2Kpage; /* For each bit n 0..7, 1=DIMM n contains 1K page devices.*/ + u16 DIMMValid; /* For each bit n 0..7, 1 = DIMM n is valid and is/will be configured*/ + u16 DIMMMismatch; /* For each bit n 0..7, 1 = DIMM n is mismatched, channel B is always considered the mismatch */ + u16 DIMMSPDCSE; /* For each bit n 0..7, 1 = DIMM n SPD checksum error*/ + u16 DimmECCPresent; /* For each bit n 0..7, 1 = DIMM n is ECC capable.*/ + u16 DimmPARPresent; /* For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable.*/ + u16 Dimmx4Present; /* For each bit n 0..7, 1 = DIMM n contains x4 data devices.*/ + u16 Dimmx8Present; /* For each bit n 0..7, 1 = DIMM n contains x8 data devices.*/ + u16 Dimmx16Present; /* For each bit n 0..7, 1 = DIMM n contains x16 data devices.*/ + u16 DIMM2Kpage; /* For each bit n 0..7, 1 = DIMM n contains 1K page devices.*/ u8 MAload[2]; /* Number of devices loading MAA bus*/ /* Number of devices loading MAB bus*/ u8 MAdimms[2]; /*Number of DIMMs loading CH A*/ @@ -379,17 +379,17 @@ struct DCTStatStruc { /* A per Node structure*/ u8 DATAload[2]; /*Number of ranks loading CH A DATA*/ /* Number of ranks loading CH B DATA*/ u8 DIMMAutoSpeed; /*Max valid Mfg. Speed of DIMMs - 1=200MHz - 2=266MHz - 3=333MHz - 4=400MHz - 5=533MHz*/ + 1 = 200MHz + 2 = 266MHz + 3 = 333MHz + 4 = 400MHz + 5 = 533MHz*/ u8 DIMMCASL; /* Min valid Mfg. CL bitfield - 0=2.0 - 1=3.0 - 2=4.0 - 3=5.0 - 4=6.0 */ + 0 = 2.0 + 1 = 3.0 + 2 = 4.0 + 3 = 5.0 + 4 = 6.0 */ u16 DIMMTrcd; /* Minimax Trcd*40 (ns) of DIMMs*/ u16 DIMMTrp; /* Minimax Trp*40 (ns) of DIMMs*/ u16 DIMMTrtp; /* Minimax Trtp*40 (ns) of DIMMs*/ @@ -399,16 +399,16 @@ struct DCTStatStruc { /* A per Node structure*/ u16 DIMMTrrd; /* Minimax Trrd*40 (ns) of DIMMs*/ u16 DIMMTwtr; /* Minimax Twtr*40 (ns) of DIMMs*/ u8 Speed; /* Bus Speed (to set Controller) - 1=200MHz - 2=266MHz - 3=333MHz - 4=400MHz */ + 1 = 200MHz + 2 = 266MHz + 3 = 333MHz + 4 = 400MHz */ u8 CASL; /* CAS latency DCT setting - 0=2.0 - 1=3.0 - 2=4.0 - 3=5.0 - 4=6.0 */ + 0 = 2.0 + 1 = 3.0 + 2 = 4.0 + 3 = 5.0 + 4 = 6.0 */ u8 Trcd; /* DCT Trcd (busclocks) */ u8 Trp; /* DCT Trp (busclocks) */ u8 Trtp; /* DCT Trtp (busclocks) */ @@ -418,27 +418,27 @@ struct DCTStatStruc { /* A per Node structure*/ u8 Trrd; /* DCT Trrd (busclocks) */ u8 Twtr; /* DCT Twtr (busclocks) */ u8 Trfc[4]; /* DCT Logical DIMM0 Trfc - 0=75ns (for 256Mb devs) - 1=105ns (for 512Mb devs) - 2=127.5ns (for 1Gb devs) - 3=195ns (for 2Gb devs) - 4=327.5ns (for 4Gb devs) */ + 0 = 75ns (for 256Mb devs) + 1 = 105ns (for 512Mb devs) + 2 = 127.5ns (for 1Gb devs) + 3 = 195ns (for 2Gb devs) + 4 = 327.5ns (for 4Gb devs) */ /* DCT Logical DIMM1 Trfc (see Trfc0 for format) */ /* DCT Logical DIMM2 Trfc (see Trfc0 for format) */ /* DCT Logical DIMM3 Trfc (see Trfc0 for format) */ - u16 CSPresent; /* For each bit n 0..7, 1=Chip-select n is present */ - u16 CSTestFail; /* For each bit n 0..7, 1=Chip-select n is present but disabled */ + u16 CSPresent; /* For each bit n 0..7, 1 = Chip-select n is present */ + u16 CSTestFail; /* For each bit n 0..7, 1 = Chip-select n is present but disabled */ u32 DCTSysBase; /* BASE[39:8] (system address) of this Node's DCTs. */ u32 DCTHoleBase; /* If not zero, BASE[39:8] (system address) of dram hole for HW remapping. Dram hole exists on this Node's DCTs. */ u32 DCTSysLimit; /* LIMIT[39:8] (system address) of this Node's DCTs */ u16 PresetmaxFreq; /* Maximum OEM defined DDR frequency - 200=200MHz (DDR400) - 266=266MHz (DDR533) - 333=333MHz (DDR667) - 400=400MHz (DDR800) */ + 200 = 200MHz (DDR400) + 266 = 266MHz (DDR533) + 333 = 333MHz (DDR667) + 400 = 400MHz (DDR800) */ u8 _2Tmode; /* 1T or 2T CMD mode (slow access mode) - 1=1T - 2=2T */ + 1 = 1T + 2 = 2T */ u8 TrwtTO; /* DCT TrwtTO (busclocks)*/ u8 Twrrd; /* DCT Twrrd (busclocks)*/ u8 Twrwr; /* DCT Twrwr (busclocks)*/ @@ -462,9 +462,9 @@ struct DCTStatStruc { /* A per Node structure*/ /* CHB Byte 0-7 Read DQS Delay */ u32 PtrPatternBufA; /* Ptr on stack to aligned DQS testing pattern*/ u32 PtrPatternBufB; /* Ptr on stack to aligned DQS testing pattern*/ - u8 Channel; /* Current Channel (0= CH A, 1=CH B)*/ + u8 Channel; /* Current Channel (0= CH A, 1 = CH B)*/ u8 ByteLane; /* Current Byte Lane (0..7)*/ - u8 Direction; /* Current DQS-DQ training write direction (0=read, 1=write)*/ + u8 Direction; /* Current DQS-DQ training write direction (0 = read, 1 = write)*/ u8 Pattern; /* Current pattern*/ u8 DQSDelay; /* Current DQS delay value*/ u32 TrainErrors; /* Current Training Errors*/ @@ -545,15 +545,15 @@ struct DCTStatStruc { /* A per Node structure*/ u8 WrDatGrossH; u8 DqsRcvEnGrossL; /* NOTE: Not used - u8 NodeSpeed */ /* Bus Speed (to set Controller) */ - /* 1=200MHz */ - /* 2=266MHz */ - /* 3=333MHz */ + /* 1 = 200MHz */ + /* 2 = 266MHz */ + /* 3 = 333MHz */ /* NOTE: Not used - u8 NodeCASL */ /* CAS latency DCT setting */ - /* 0=2.0 */ - /* 1=3.0 */ - /* 2=4.0 */ - /* 3=5.0 */ - /* 4=6.0 */ + /* 0 = 2.0 */ + /* 1 = 3.0 */ + /* 2 = 4.0 */ + /* 3 = 5.0 */ + /* 4 = 6.0 */ u8 TrwtWB; u8 CurrRcvrCHADelay; /* for keep current RcvrEnDly of chA*/ u16 T1000; /* get the T1000 figure (cycle time (ns)*1K)*/ @@ -852,7 +852,7 @@ struct amd_s3_persistent_data { #define SB_SWNodeHole 8 /* Remapping of Node Base on this Node to create a gap.*/ #define SB_HWHole 9 /* Memory Hole created on this Node using HW remapping.*/ #define SB_Over400MHz 10 /* DCT freq >= 400MHz flag*/ -#define SB_DQSPos_Pass2 11 /* Using for TrainDQSPos DIMM0/1, when freq>=400MHz*/ +#define SB_DQSPos_Pass2 11 /* Using for TrainDQSPos DIMM0/1, when freq >= 400MHz*/ #define SB_DQSRcvLimit 12 /* Using for DQSRcvEnTrain to know we have reached to upper bound.*/ #define SB_ExtConfig 13 /* Indicator the default setting for extend PCI configuration support*/ @@ -862,73 +862,73 @@ struct amd_s3_persistent_data { ===============================================================================*/ /*Platform Configuration*/ #define NV_PACK_TYPE 0 /* CPU Package Type (2-bits) - 0=NPT L1 - 1=NPT M2 - 2=NPT S1*/ + 0 = NPT L1 + 1 = NPT M2 + 2 = NPT S1*/ #define NV_MAX_NODES 1 /* Number of Nodes/Sockets (4-bits)*/ #define NV_MAX_DIMMS 2 /* Number of DIMM slots for the specified Node ID (4-bits)*/ #define NV_MAX_MEMCLK 3 /* Maximum platform demonstrated Memclock (10-bits) - 200=200MHz (DDR400) - 266=266MHz (DDR533) - 333=333MHz (DDR667) - 400=400MHz (DDR800)*/ + 200 = 200MHz (DDR400) + 266 = 266MHz (DDR533) + 333 = 333MHz (DDR667) + 400 = 400MHz (DDR800)*/ #define NV_MIN_MEMCLK 4 /* Minimum platform demonstrated Memclock (10-bits) */ #define NV_ECC_CAP 5 /* Bus ECC capable (1-bits) - 0=Platform not capable - 1=Platform is capable*/ + 0 = Platform not capable + 1 = Platform is capable*/ #define NV_4RANKType 6 /* Quad Rank DIMM slot type (2-bits) - 0=Normal - 1=R4 (4-Rank Registered DIMMs in AMD server configuration) - 2=S4 (Unbuffered SO-DIMMs)*/ + 0 = Normal + 1 = R4 (4-Rank Registered DIMMs in AMD server configuration) + 2 = S4 (Unbuffered SO-DIMMs)*/ #define NV_BYPMAX 7 /* Value to set DcqBypassMax field (See Function 2, Offset 94h, [27:24] of BKDG for field definition). - 4=4 times bypass (normal for non-UMA systems) - 7=7 times bypass (normal for UMA systems)*/ + 4 = 4 times bypass (normal for non-UMA systems) + 7 = 7 times bypass (normal for UMA systems)*/ #define NV_RDWRQBYP 8 /* Value to set RdWrQByp field (See Function 2, Offset A0h, [3:2] of BKDG for field definition). - 2=8 times (normal for non-UMA systems) - 3=16 times (normal for UMA systems)*/ + 2 = 8 times (normal for non-UMA systems) + 3 = 16 times (normal for UMA systems)*/ /*Dram Timing*/ #define NV_MCTUSRTMGMODE 10 /* User Memclock Mode (2-bits) - 0=Auto, no user limit - 1=Auto, user limit provided in NV_MemCkVal - 2=Manual, user value provided in NV_MemCkVal*/ + 0 = Auto, no user limit + 1 = Auto, user limit provided in NV_MemCkVal + 2 = Manual, user value provided in NV_MemCkVal*/ #define NV_MemCkVal 11 /* Memory Clock Value (2-bits) - 0=200MHz - 1=266MHz - 2=333MHz - 3=400MHz*/ + 0 = 200MHz + 1 = 266MHz + 2 = 333MHz + 3 = 400MHz*/ /*Dram Configuration*/ #define NV_BankIntlv 20 /* Dram Bank (chip-select) Interleaving (1-bits) - 0=disable - 1=enable*/ + 0 = disable + 1 = enable*/ #define NV_AllMemClks 21 /* Turn on All DIMM clocks (1-bits) - 0=normal - 1=enable all memclocks*/ + 0 = normal + 1 = enable all memclocks*/ #define NV_SPDCHK_RESTRT 22 /* SPD Check control bitmap (1-bits) - 0=Exit current node init if any DIMM has SPD checksum error - 1=Ignore faulty SPD checksums (Note: DIMM cannot be enabled)*/ + 0 = Exit current node init if any DIMM has SPD checksum error + 1 = Ignore faulty SPD checksums (Note: DIMM cannot be enabled)*/ #define NV_DQSTrainCTL 23 /* DQS Signal Timing Training Control - 0=skip DQS training - 1=perform DQS training*/ + 0 = skip DQS training + 1 = perform DQS training*/ #define NV_NodeIntlv 24 /* Node Memory Interleaving (1-bits) - 0=disable - 1=enable*/ + 0 = disable + 1 = enable*/ #define NV_BurstLen32 25 /* BurstLength32 for 64-bit mode (1-bits) - 0=disable (normal) - 1=enable (4 beat burst when width is 64-bits)*/ + 0 = disable (normal) + 1 = enable (4 beat burst when width is 64-bits)*/ /*Dram Power*/ #define NV_CKE_PDEN 30 /* CKE based power down mode (1-bits) - 0=disable - 1=enable*/ + 0 = disable + 1 = enable*/ #define NV_CKE_CTL 31 /* CKE based power down control (1-bits) - 0=per Channel control - 1=per Chip select control*/ + 0 = per Channel control + 1 = per Chip select control*/ #define NV_CLKHZAltVidC3 32 /* Memclock tri-stating during C3 and Alt VID (1-bits) - 0=disable - 1=enable*/ + 0 = disable + 1 = enable*/ /*Memory Map/Mgt.*/ #define NV_BottomIO 40 /* Bottom of 32-bit IO space (8-bits) @@ -936,8 +936,8 @@ struct amd_s3_persistent_data { #define NV_BottomUMA 41 /* Bottom of shared graphics dram (8-bits) NV_BottomUMA[7:0]=Addr[31:24]*/ #define NV_MemHole 42 /* Memory Hole Remapping (1-bits) - 0=disable - 1=enable */ + 0 = disable + 1 = enable */ /*ECC*/ #define NV_ECC 50 /* Dram ECC enable*/ @@ -949,13 +949,13 @@ struct amd_s3_persistent_data { #define NV_L3BKScrub 57 /* L3 ECC Background Scrubber CTL*/ #define NV_DCBKScrub 58 /* DCache ECC Background Scrubber CTL*/ #define NV_CS_SpareCTL 59 /* Chip Select Spare Control bit 0: - 0=disable Spare - 1=enable Spare */ + 0 = disable Spare + 1 = enable Spare */ /* Chip Select Spare Control bit 1-4: Reserved, must be zero*/ #define NV_SyncOnUnEccEn 61 /* SyncOnUnEccEn control - 0=disable - 1=enable*/ + 0 = disable + 1 = enable*/ #define NV_Unganged 62 #define NV_ChannelIntlv 63 /* Channel Interleaving (3-bits) |