diff options
Diffstat (limited to 'src/northbridge/amd/amdmct/mct/mct.h')
| -rw-r--r-- | src/northbridge/amd/amdmct/mct/mct.h | 552 |
1 files changed, 552 insertions, 0 deletions
diff --git a/src/northbridge/amd/amdmct/mct/mct.h b/src/northbridge/amd/amdmct/mct/mct.h new file mode 100644 index 0000000000..2ddd5da7bc --- /dev/null +++ b/src/northbridge/amd/amdmct/mct/mct.h @@ -0,0 +1,552 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef MCT_H +#define MCT_H +/*=========================================================================== + CPU - K8/FAM10 +===========================================================================*/ +#define PT_L1 0 /* CPU Package Type*/ +#define PT_M2 1 +#define PT_S1 2 + +#define J_MIN 0 /* j loop constraint. 1=CL 2.0 T*/ +#define J_MAX 4 /* j loop constraint. 4=CL 6.0 T*/ +#define K_MIN 1 /* k loop constraint. 1=200 Mhz*/ +#define K_MAX 4 /* k loop constraint. 9=400 Mhz*/ +#define CL_DEF 2 /* Default value for failsafe operation. 2=CL 4.0 T*/ +#define T_DEF 1 /* Default value for failsafe operation. 1=5ns (cycle time)*/ + +#define BSCRate 1 /* reg bit field=rate of dram scrubber for ecc*/ + /* memory initialization (ecc and check-bits).*/ + /* 1=40 ns/64 bytes.*/ +#define FirstPass 1 /* First pass through RcvEn training*/ +#define SecondPass 2 /* Second pass through Rcven training*/ + +#define RCVREN_MARGIN 6 /* number of DLL taps to delay beyond first passing position*/ +#define MAXASYNCLATCTL_3 60 /* Max Async Latency Control value (This value will be divided by 20)*/ +#define DQS_FAIL 1 +#define DQS_PASS 0 +#define DQS_WRITEDIR 0 +#define DQS_READDIR 1 +#define MIN_DQS_WNDW 3 +#define secPassOffset 6 + +#define PA_HOST (((24 << 3)+0) << 8) /* Node 0 Host Bus function PCI Address bits [15:0] */ +#define PA_MAP (((24 << 3)+1) << 8) /* Node 0 MAP function PCI Address bits [15:0] */ +#define PA_DCT (((24 << 3)+2) << 8) /* Node 0 DCT function PCI Address bits [15:0] */ +#define PA_DCTADDL (((00 << 3)+2) << 8) /* Node x DCT function, Additional Registers PCI Address bits [15:0] */ +#define PA_NBMISC (((24 << 3)+3) << 8) /* Node 0 Misc PCI Address bits [15:0] */ +#define PA_NBDEVOP (((00 << 3)+3) << 8) /* Node 0 Misc PCI Address bits [15:0] */ + +#define DCC_EN 1 /* X:2:0x94[19]*/ +#define ILD_Lmt 3 /* X:2:0x94[18:16]*/ + +#define EncodedTSPD 0x00191709 /* encodes which SPD byte to get T from*/ + /* versus CL X, CL X-.5, and CL X-1*/ + +#define Bias_TrpT 3 /* bias to convert bus clocks to bit field value*/ +#define Bias_TrrdT 2 +#define Bias_TrcdT 3 +#define Bias_TrasT 3 +#define Bias_TrcT 11 +#define Bias_TrtpT 4 +#define Bias_TwrT 3 +#define Bias_TwtrT 0 + +#define Min_TrpT 3 /* min programmable value in busclocks*/ +#define Max_TrpT 6 /* max programmable value in busclocks*/ +#define Min_TrrdT 2 +#define Max_TrrdT 5 +#define Min_TrcdT 3 +#define Max_TrcdT 6 +#define Min_TrasT 5 +#define Max_TrasT 18 +#define Min_TrcT 11 +#define Max_TrcT 26 +#define Min_TrtpT 4 +#define Max_TrtpT 5 +#define Min_TwrT 3 +#define Max_TwrT 6 +#define Min_TwtrT 1 +#define Max_TwtrT 3 + +/* common register bit names */ +#define DramHoleValid 0 /* func 1, offset F0h, bit 0 */ +#define CSEnable 0 /* func 2, offset 40h-5C, bit 0 */ +#define Spare 1 /* func 2, offset 40h-5C, bit 1 */ +#define TestFail 2 /* func 2, offset 40h-5C, bit 2 */ +#define DqsRcvEnTrain 18 /* func 2, offset 78h, bit 18 */ +#define EnDramInit 31 /* func 2, offset 7Ch, bit 31 */ +#define DisAutoRefresh 18 /* func 2, offset 8Ch, bit 18 */ +#define InitDram 0 /* func 2, offset 90h, bit 0 */ +#define BurstLength32 10 /* func 2, offset 90h, bit 10 */ +#define Width128 11 /* func 2, offset 90h, bit 11 */ +#define X4Dimm 12 /* func 2, offset 90h, bit 12 */ +#define UnBuffDimm 16 /* func 2, offset 90h, bit 16 */ +#define DimmEcEn 19 /* func 2, offset 90h, bit 19 */ +#define MemClkFreqVal 3 /* func 2, offset 94h, bit 3 */ +#define RDqsEn 12 /* func 2, offset 94h, bit 12 */ +#define DisDramInterface 14 /* func 2, offset 94h, bit 14 */ +#define DctAccessWrite 30 /* func 2, offset 98h, bit 30 */ +#define DctAccessDone 31 /* func 2, offset 98h, bit 31 */ +#define PwrSavingsEn 10 /* func 2, offset A0h, bit 10 */ +#define Mod64BitMux 4 /* func 2, offset A0h, bit 4 */ +#define DisableJitter 1 /* func 2, offset A0h, bit 1 */ +#define DramEnabled 9 /* func 2, offset A0h, bit 9 */ +#define SyncOnUcEccEn 2 /* fun 3, offset 44h, bit 2 */ + +/*============================================================================= + Jedec DDR II +=============================================================================*/ +#define SPD_TYPE 2 /* SPD byte read location*/ + #define JED_DDRSDRAM 0x07 /* Jedec defined bit field*/ + #define JED_DDR2SDRAM 0x08 /* Jedec defined bit field*/ + +#define SPD_DIMMTYPE 20 +#define SPD_ATTRIB 21 + #define JED_DIFCKMSK 0x20 /* Differential Clock Input*/ + #define JED_REGADCMSK 0x11 /* Registered Address/Control*/ + #define JED_PROBEMSK 0x40 /* Analysis Probe installed*/ +#define SPD_DEVATTRIB 22 +#define SPD_EDCTYPE 11 + #define JED_ECC 0x02 + #define JED_ADRCPAR 0x04 +#define SPD_ROWSZ 3 +#define SPD_COLSZ 4 +#define SPD_LBANKS 17 /* number of [logical] banks on each device*/ +#define SPD_DMBANKS 5 /* number of physical banks on dimm*/ + #define SPDPLBit 4 /* Dram package bit*/ +#define SPD_BANKSZ 31 /* capacity of physical bank*/ +#define SPD_DEVWIDTH 13 +#define SPD_CASLAT 18 +#define SPD_TRP 27 +#define SPD_TRRD 28 +#define SPD_TRCD 29 +#define SPD_TRAS 30 +#define SPD_TWR 36 +#define SPD_TWTR 37 +#define SPD_TRTP 38 +#define SPD_TRCRFC 40 +#define SPD_TRC 41 +#define SPD_TRFC 42 + +#define SPD_MANDATEYR 93 /* Module Manufacturing Year (BCD) */ + +#define SPD_MANDATEWK 94 /* Module Manufacturing Week (BCD) */ + +/*-------------------------------------- + Jedec DDR II related equates +--------------------------------------*/ +#define MYEAR06 6 /* Manufacturing Year BCD encoding of 2006 - 06d*/ +#define MWEEK24 0x24 /* Manufacturing Week BCD encoding of June - 24d*/ + +/*============================================================================= + Macros +=============================================================================*/ + +#define _2GB_RJ8 (2<<(30-8)) +#define _4GB_RJ8 (4<<(30-8)) +#define _4GB_RJ4 (4<<(30-4)) + +#define BigPagex8_RJ8 (1<<(17+3-8)) /* 128KB * 8 >> 8 */ + +/*============================================================================= + Global MCT Status Structure +=============================================================================*/ +struct MCTStatStruc { + u32 GStatus; /* Global Status bitfield*/ + u32 HoleBase; /* If not zero, BASE[39:8] (system address) + of sub 4GB dram hole for HW remapping.*/ + u32 Sub4GCacheTop; /* If not zero, the 32-bit top of cacheable memory.*/ + u32 SysLimit; /* LIMIT[39:8] (system address)*/ +}; +/*============================================================================= + Global MCT Configuration Status Word (GStatus) +=============================================================================*/ +/*These should begin at bit 0 of GStatus[31:0]*/ +#define GSB_MTRRshort 0 /* Ran out of MTRRs while mapping memory*/ +#define GSB_ECCDIMMs 1 /* All banks of all Nodes are ECC capable*/ +#define GSB_DramECCDis 2 /* Dram ECC requested but not enabled.*/ +#define GSB_SoftHole 3 /* A Node Base gap was created*/ +#define GSB_HWHole 4 /* A HW dram remap was created*/ +#define GSB_NodeIntlv 5 /* Node Memory interleaving was enabled*/ +#define GSB_SpIntRemapHole 16 /* Special condition for Node Interleave and HW remapping*/ + + +/*=============================================================================== + Local DCT Status structure (a structure for each DCT) +===============================================================================*/ + +struct DCTStatStruc { /* A per Node structure*/ + u8 Node_ID; /* Node ID of current controller*/ + u8 ErrCode; /* Current error condition of Node + 0= no error + 1= Variance Error, DCT is running but not in an optimal configuration. + 2= Stop Error, DCT is NOT running + 3= Fatal Error, DCT/MCT initialization has been halted.*/ + u32 ErrStatus; /* Error Status bit Field */ + u32 Status; /* Status bit Field*/ + u8 DIMMAddr[8]; /* SPD address of DIMM controlled by MA0_CS_L[0,1]*/ + /* SPD address of..MB0_CS_L[0,1]*/ + /* SPD address of..MA1_CS_L[0,1]*/ + /* SPD address of..MB1_CS_L[0,1]*/ + /* SPD address of..MA2_CS_L[0,1]*/ + /* SPD address of..MB2_CS_L[0,1]*/ + /* SPD address of..MA3_CS_L[0,1]*/ + /* SPD address of..MB3_CS_L[0,1]*/ + u16 DIMMPresent; /* For each bit n 0..7, 1=DIMM n is present. + DIMM# Select Signal + 0 MA0_CS_L[0,1] + 1 MB0_CS_L[0,1] + 2 MA1_CS_L[0,1] + 3 MB1_CS_L[0,1] + 4 MA2_CS_L[0,1] + 5 MB2_CS_L[0,1] + 6 MA3_CS_L[0,1] + 7 MB3_CS_L[0,1]*/ + u16 DIMMValid; /* For each bit n 0..7, 1=DIMM n is valid and is/will be configured*/ + u16 DIMMSPDCSE; /* For each bit n 0..7, 1=DIMM n SPD checksum error*/ + u16 DimmECCPresent; /* For each bit n 0..7, 1=DIMM n is ECC capable.*/ + u16 DimmPARPresent; /* For each bit n 0..7, 1=DIMM n is ADR/CMD Parity capable.*/ + u16 Dimmx4Present; /* For each bit n 0..7, 1=DIMM n contains x4 data devices.*/ + u16 Dimmx8Present; /* For each bit n 0..7, 1=DIMM n contains x8 data devices.*/ + u16 Dimmx16Present; /* For each bit n 0..7, 1=DIMM n contains x16 data devices.*/ + u16 DIMM1Kpage; /* For each bit n 0..7, 1=DIMM n contains 1K page devices.*/ + u8 MAload[2]; /* Number of devices loading MAA bus*/ + /* Number of devices loading MAB bus*/ + u8 MAdimms[2]; /* Number of DIMMs loading CH A*/ + /* Number of DIMMs loading CH B*/ + u8 DATAload[2]; /* Number of ranks loading CH A DATA*/ + /* Number of ranks loading CH B DATA*/ + u8 DIMMAutoSpeed; /* Max valid Mfg. Speed of DIMMs + 1=200Mhz + 2=266Mhz + 3=333Mhz + 4=400Mhz */ + u8 DIMMCASL; /* Min valid Mfg. CL bitfield + 0=2.0 + 1=3.0 + 2=4.0 + 3=5.0 + 4=6.0 */ + u16 DIMMTrcd; /* Minimax Trcd*40 (ns) of DIMMs*/ + u16 DIMMTrp; /* Minimax Trp*40 (ns) of DIMMs*/ + u16 DIMMTrtp; /* Minimax Trtp*40 (ns) of DIMMs*/ + u16 DIMMTras; /* Minimax Tras*40 (ns) of DIMMs*/ + u16 DIMMTrc; /* Minimax Trc*40 (ns) of DIMMs*/ + u16 DIMMTwr; /* Minimax Twr*40 (ns) of DIMMs*/ + u16 DIMMTrrd; /* Minimax Trrd*40 (ns) of DIMMs*/ + u16 DIMMTwtr; /* Minimax Twtr*40 (ns) of DIMMs*/ + u8 Speed; /* Bus Speed (to set Controller) + 1=200Mhz + 2=266Mhz + 3=333Mhz + 4=400Mhz */ + u8 CASL; /* CAS latency DCT setting + 0=2.0 + 1=3.0 + 2=4.0 + 3=5.0 + 4=6.0 */ + u8 Trcd; /* DCT Trcd (busclocks) */ + u8 Trp; /* DCT Trp (busclocks) */ + u8 Trtp; /* DCT Trtp (busclocks) */ + u8 Tras; /* DCT Tras (busclocks) */ + u8 Trc; /* DCT Trc (busclocks) */ + u8 Twr; /* DCT Twr (busclocks) */ + u8 Trrd; /* DCT Trrd (busclocks) */ + u8 Twtr; /* DCT Twtr (busclocks) */ + u8 Trfc[4]; /* DCT Logical DIMM0 Trfc + 0=75ns (for 256Mb devs) + 1=105ns (for 512Mb devs) + 2=127.5ns (for 1Gb devs) + 3=195ns (for 2Gb devs) + 4=327.5ns (for 4Gb devs) */ + /* DCT Logical DIMM1 Trfc (see Trfc0 for format) */ + /* DCT Logical DIMM2 Trfc (see Trfc0 for format) */ + /* DCT Logical DIMM3 Trfc (see Trfc0 for format) */ + u16 CSPresent; /* For each bit n 0..7, 1=Chip-select n is present */ + u16 CSTestFail; /* For each bit n 0..7, 1=Chip-select n is present but disabled */ + u32 DCTSysBase; /* BASE[39:8] (system address) of this Node's DCTs. */ + u32 DCTHoleBase; /* If not zero, BASE[39:8] (system address) of dram hole for HW remapping. Dram hole exists on this Node's DCTs. */ + u32 DCTSysLimit; /* LIMIT[39:8] (system address) of this Node's DCTs */ + u16 PresetmaxFreq; /* Maximum OEM defined DDR frequency + 200=200Mhz (DDR400) + 266=266Mhz (DDR533) + 333=333Mhz (DDR667) + 400=400Mhz (DDR800) */ + u8 _2Tmode; /* 1T or 2T CMD mode (slow access mode) + 1=1T + 2=2T */ + u8 TrwtTO; /* DCT TrwtTO (busclocks)*/ + u8 Twrrd; /* DCT Twrrd (busclocks)*/ + u8 Twrwr; /* DCT Twrwr (busclocks)*/ + u8 Trdrd; /* DCT Trdrd (busclocks)*/ + u32 CH_ODC_CTL[2]; /* Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h*/ + u32 CH_ADDR_TMG[2]; /* Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h*/ + /* Output Driver Strength (see BKDG FN2:Offset 9Ch, index 20h*/ + /* Address Bus Timing (see BKDG FN2:Offset 9Ch, index 24h*/ + u16 CH_EccDQSLike[2]; /* CHA DQS ECC byte like...*/ + u8 CH_EccDQSScale[2]; /* CHA DQS ECC byte scale*/ +// u8 reserved_b_1; /* Reserved*/ + /* CHB DQS ECC byte like...*/ + /* CHB DQS ECC byte scale*/ +// u8 reserved_b_2; /*Reserved*/ + u8 MaxAsyncLat; /* Max Asynchronous Latency (ns)*/ + u8 CH_B_DQS[2][2][9]; /* CHA Byte 0 - 7 and Check Write DQS Delay*/ + /* Reserved*/ + /* CHA Byte 0 - 7 and Check Read DQS Delay*/ + /* Reserved*/ + /* CHB Byte 0 - 7 and Check Write DQS Delay*/ + /* Reserved*/ + /* CHB Byte 0 - 7 and Check Read DQS Delay*/ + /* Reserved*/ + u8 CH_D_RCVRDLY[2][4]; /* CHA DIMM 0 - 3 Receiver Enable Delay*/ + /* CHB DIMM 0 - 3 Receiver Enable Delay*/ + u32 PtrPatternBufA; /* Ptr on stack to aligned DQS testing pattern*/ + u32 PtrPatternBufB; /*Ptr on stack to aligned DQS testing pattern*/ + u8 Channel; /* Current Channel (0= CH A, 1=CH B)*/ + u8 ByteLane; /* Current Byte Lane (0..7)*/ + u8 Direction; /* Current DQS-DQ training write direction (0=read, 1=write)*/ + u8 Pattern; /* Current pattern*/ + u8 DQSDelay; /* Current DQS delay value*/ + u32 TrainErrors; /* Current Training Errors*/ +// u8 reserved_b_3; /* RSVD */ + u32 AMC_TSC_DeltaLo; /* Time Stamp Counter measurement of AMC, Low dword*/ + u32 AMC_TSC_DeltaHi; /* Time Stamp Counter measurement of AMC, High dword*/ + u8 CH_B_Dly[2][2][2][8]; /* CH A byte lane 0 - 7 minimum filtered window passing DQS delay value*/ + /* CH A byte lane 0 - 7 maximum filtered window passing DQS delay value*/ + /* CH B byte lane 0 - 7 minimum filtered window passing DQS delay value*/ + /* CH B byte lane 0 - 7 maximum filtered window passing DQS delay value*/ + /* CH A byte lane 0 - 7 minimum filtered window passing DQS delay value*/ + /* CH A byte lane 0 - 7 maximum filtered window passing DQS delay value*/ + /* CH B byte lane 0 - 7 minimum filtered window passing DQS delay value*/ + /* CH B byte lane 0 - 7 maximum filtered window passing DQS delay value*/ + u32 LogicalCPUID; /* The logical CPUID of the node*/ + u16 HostBiosSrvc1; /* Word sized general purpose field for use by host BIOS. Scratch space.*/ + u32 HostBiosSrvc2; /* Dword sized general purpose field for use by host BIOS. Scratch space.*/ + u16 DimmQRPresent; /* QuadRank DIMM present?*/ + u16 DimmTrainFail; /* Bitmap showing which dimms failed training*/ + u16 CSTrainFail; /* Bitmap showing which chipselects failed training*/ + u16 DimmYr06; /* Bitmap indicating which Dimms have a manufactur's year code <= 2006*/ + u16 DimmWk2406; /* Bitmap indicating which Dimms have a manufactur's week code <= 24 of 2006 (June)*/ + u16 DimmDRPresent; /* Bitmap indicating that Dual Rank Dimms are present*/ + u16 DimmPlPresent; /* Bitmap indicating that Planar (1) or Stacked (0) Dimms are present.*/ + u16 ChannelTrainFail; /* Bitmap showing the chanel informaiton about failed Chip Selects*/ + /* 0 in any bit field indicates Channel 0*/ + /* 1 in any bit field indicates Channel 1*/ +}; + +/*=============================================================================== + Local Error Status Codes (DCTStatStruc.ErrCode) +===============================================================================*/ +#define SC_RunningOK 0 +#define SC_VarianceErr 1 /* Running non-optimally*/ +#define SC_StopError 2 /* Not Running*/ +#define SC_FatalErr 3 /* Fatal Error, MCTB has exited immediately*/ + +/*=============================================================================== + Local Error Status (DCTStatStruc.ErrStatus[31:0]) + ===============================================================================*/ +#define SB_NoDimms 0 +#define SB_DIMMChkSum 1 +#define SB_DimmMismatchM 2 /* dimm module type(buffer) mismatch*/ +#define SB_DimmMismatchT 3 /* dimm CL/T mismatch*/ +#define SB_DimmMismatchO 4 /* dimm organization mismatch (128-bit)*/ +#define SB_NoTrcTrfc 5 /* SPD missing Trc or Trfc info*/ +#define SB_NoCycTime 6 /* SPD missing byte 23 or 25*/ +#define SB_BkIntDis 7 /* Bank interleave requested but not enabled*/ +#define SB_DramECCDis 8 /* Dram ECC requested but not enabled*/ +#define SB_SpareDis 9 /* Online spare requested but not enabled*/ +#define SB_MinimumMode 10 /* Running in Minimum Mode*/ +#define SB_NORCVREN 11 /* No DQS Receiver Enable pass window found*/ +#define SB_CHA2BRCVREN 12 /* DQS Rcvr En pass window CHA to CH B too large*/ +#define SB_SmallRCVR 13 /* DQS Rcvr En pass window too small (far right of dynamic range)*/ +#define SB_NODQSPOS 14 /* No DQS-DQ passing positions*/ +#define SB_SMALLDQS 15 /* DQS-DQ passing window too small*/ + +/*=============================================================================== + Local Configuration Status (DCTStatStruc.Status[31:0]) +===============================================================================*/ +#define SB_Registered 0 /* All DIMMs are Registered*/ +#define SB_ECCDIMMs 1 /* All banks ECC capable*/ +#define SB_PARDIMMs 2 /* All banks Addr/CMD Parity capable*/ +#define SB_DiagClks 3 /* Jedec ALL slots clock enable diag mode*/ +#define SB_128bitmode 4 /* DCT in 128-bit mode operation*/ +#define SB_64MuxedMode 5 /* DCT in 64-bit mux'ed mode.*/ +#define SB_2TMode 6 /* 2T CMD timing mode is enabled.*/ +#define SB_SWNodeHole 7 /* Remapping of Node Base on this Node to create a gap.*/ +#define SB_HWHole 8 /* Memory Hole created on this Node using HW remapping.*/ + + + +/*=============================================================================== + NVRAM/run-time-configurable Items +===============================================================================*/ +/* Platform Configuration */ +#define NV_PACK_TYPE 0 /* CPU Package Type (2-bits) + 0=NPT L1 + 1=NPT M2 + 2=NPT S1*/ +#define NV_MAX_NODES 1 /* Number of Nodes/Sockets (4-bits)*/ +#define NV_MAX_DIMMS 2 /* Number of DIMM slots for the specified Node ID (4-bits)*/ +#define NV_MAX_MEMCLK 3 /* Maximum platform demonstrated Memclock (10-bits) + 200=200Mhz (DDR400) + 266=266Mhz (DDR533) + 333=333Mhz (DDR667) + 400=400Mhz (DDR800)*/ +#define NV_ECC_CAP 4 /* Bus ECC capable (1-bits) + 0=Platform not capable + 1=Platform is capable*/ +#define NV_4RANKType 5 /* Quad Rank DIMM slot type (2-bits) + 0=Normal + 1=R4 (4-Rank Registered DIMMs in AMD server configuration) + 2=S4 (Unbuffered SO-DIMMs)*/ +#define NV_BYPMAX 6 /* Value to set DcqBypassMax field (See Function 2, Offset 94h, [27:24] of BKDG for field definition). + 4=4 times bypass (normal for non-UMA systems) + 7=7 times bypass (normal for UMA systems)*/ +#define NV_RDWRQBYP 7 /* Value to set RdWrQByp field (See Function 2, Offset A0h, [3:2] of BKDG for field definition). + 2=8 times (normal for non-UMA systems) + 3=16 times (normal for UMA systems)*/ + + +/* Dram Timing */ +#define NV_MCTUSRTMGMODE 10 /* User Memclock Mode (2-bits) + 0=Auto, no user limit + 1=Auto, user limit provided in NV_MemCkVal + 2=Manual, user value provided in NV_MemCkVal*/ +#define NV_MemCkVal 11 /* Memory Clock Value (2-bits) + 0=200Mhz + 1=266Mhz + 2=333Mhz + 3=400Mhz*/ + +/* Dram Configuration */ +#define NV_BankIntlv 20 /* Dram Bank (chip-select) Interleaving (1-bits) + 0=disable + 1=enable*/ +#define NV_AllMemClks 21 /* Turn on All DIMM clocks (1-bits) + 0=normal + 1=enable all memclocks*/ +#define NV_SPDCHK_RESTRT 22 /* SPD Check control bitmap (1-bits) + 0=Exit current node init if any DIMM has SPD checksum error + 1=Ignore faulty SPD checksums (Note: DIMM cannot be enabled)*/ +#define NV_DQSTrainCTL 23 /* DQS Signal Timing Training Control + 0=skip DQS training + 1=perform DQS training*/ +#define NV_NodeIntlv 24 /* Node Memory Interleaving (1-bits) + 0=disable + 1=enable*/ +#define NV_BurstLen32 25 /* burstLength32 for 64-bit mode (1-bits) + 0=disable (normal) + 1=enable (4 beat burst when width is 64-bits)*/ + +/* Dram Power */ +#define NV_CKE_PDEN 30 /* CKE based power down mode (1-bits) + 0=disable + 1=enable*/ +#define NV_CKE_CTL 31 /* CKE based power down control (1-bits) + 0=per Channel control + 1=per Chip select control*/ +#define NV_CLKHZAltVidC3 32 /* Memclock tri-stating during C3 and Alt VID (1-bits) + 0=disable + 1=enable*/ + +/* Memory Map/Mgt.*/ +#define NV_BottomIO 40 /* Bottom of 32-bit IO space (8-bits) + NV_BottomIO[7:0]=Addr[31:24]*/ +#define NV_BottomUMA 41 /* Bottom of shared graphics dram (8-bits) + NV_BottomUMA[7:0]=Addr[31:24]*/ +#define NV_MemHole 42 /* Memory Hole Remapping (1-bits) + 0=disable + 1=enable */ + +/* ECC */ +#define NV_ECC 50 /* Dram ECC enable*/ +#define NV_NBECC 52 /* ECC MCE enable*/ +#define NV_ChipKill 53 /* Chip-Kill ECC Mode enable*/ +#define NV_ECCRedir 54 /* Dram ECC Redirection enable*/ +#define NV_DramBKScrub 55 /* Dram ECC Background Scrubber CTL*/ +#define NV_L2BKScrub 56 /* L2 ECC Background Scrubber CTL*/ +#define NV_DCBKScrub 57 /* DCache ECC Background Scrubber CTL*/ +#define NV_CS_SpareCTL 58 /* Chip Select Spare Control bit 0: + 0=disable Spare + 1=enable Spare */ + /*Chip Select Spare Control bit 1-4: + Reserved, must be zero*/ +#define NV_Parity 60 /* Parity Enable*/ +#define NV_SyncOnUnEccEn 61 /* SyncOnUnEccEn control + 0=disable + 1=enable*/ + +#ifndef MAX_NODES_SUPPORTED +#define MAX_NODES_SUPPORTED 8 +#endif + +#ifndef MAX_DIMMS_SUPPORTED +#define MAX_DIMMS_SUPPORTED 8 +#endif + +#ifndef MAX_CS_SUPPORTED +#define MAX_CS_SUPPORTED 8 +#endif + + +// global function +u32 NodePresent(u32 Node); +u32 Get_NB32n(struct DCTStatStruc *pDCTstat, u32 addrx); +u32 Get_NB32(u32 addr); /* NOTE: extend addr to 32 bit for bus > 0 */ +u32 mctGetLogicalCPUID(u32 Node); + +void K8FInterleaveBanks(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); + +void mctInitWithWritetoCS(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); + +void mctGet_PS_Cfg(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); +void Get_ChannelPS_Cfg0( unsigned MAAdimms, unsigned Speed, unsigned MAAload, unsigned DATAAload, + unsigned *AddrTmgCTL, unsigned *ODC_CTL); +void Get_ChannelPS_Cfg1( unsigned MAAdimms, unsigned Speed, unsigned MAAload, + unsigned *AddrTmgCTL, unsigned *ODC_CTL, unsigned *val); +void Get_ChannelPS_Cfg2( unsigned MAAdimms, unsigned Speed, unsigned MAAload, + unsigned *AddrTmgCTL, unsigned *ODC_CTL, unsigned *val); + +u8 MCTDefRet(void); + +u32 Get_RcvrSysAddr(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 channel, u8 receiver, u8 *valid); +u32 Get_MCTSysAddr(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, u8 channel, u8 chipsel, u8 *valid); +void K8FTrainReceiverEn(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA, u8 pass); +void K8FTrainDQSPos(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); +u32 SetUpperFSbase(u32 addr_hi); + + +void K8FECCInit(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); + +unsigned amd_FD_support(void); +void amd_MCTInit(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); + +void K8FCPUMemTyping(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); +void K8FCPUMemTyping_clear(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstatA); + +void K8FWaitMemClrDelay(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat); +unsigned K8FCalcFinalDQSRcvValue(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat, unsigned LeftRcvEn, unsigned RightRcvEn, unsigned *valid); + +void K8FGetDeltaTSCPart1(struct DCTStatStruc *pDCTstat); +void K8FGetDeltaTSCPart2(struct DCTStatStruc *pDCTstat); +#endif |