diff options
Diffstat (limited to 'src/mainboard')
42 files changed, 0 insertions, 1966 deletions
diff --git a/src/mainboard/starlabs/Kconfig b/src/mainboard/starlabs/Kconfig deleted file mode 100644 index 4df05881d1..0000000000 --- a/src/mainboard/starlabs/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if VENDOR_STARLABS - -choice - prompt "Mainboard model" - -source "src/mainboard/starlabs/*/Kconfig.name" - -endchoice - -source "src/mainboard/starlabs/*/Kconfig" - -config MAINBOARD_VENDOR - default "Star Labs" - -endif # VENDOR_STARLABS diff --git a/src/mainboard/starlabs/Kconfig.name b/src/mainboard/starlabs/Kconfig.name deleted file mode 100644 index 7aab0da2b9..0000000000 --- a/src/mainboard/starlabs/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config VENDOR_STARLABS - bool "Star Labs" diff --git a/src/mainboard/starlabs/labtop/Kconfig b/src/mainboard/starlabs/labtop/Kconfig deleted file mode 100644 index 597ffd9dcd..0000000000 --- a/src/mainboard/starlabs/labtop/Kconfig +++ /dev/null @@ -1,122 +0,0 @@ -if BOARD_STARLABS_LABTOP_CML || BOARD_STARLABS_LABTOP_KBL - -# -# LabTop Mk IV CML Board uses the following devices: -# -# GigaDevice GD25Q64C (8192KB) SPI NOR flash (KBL) -# Winbond 25Q128JVSQ (16384KB) SPI NOR flash (CML) -# Infineon SLB9670VQ SPI TPM2.0 device -# Realtek ALC256 audio CODEC -# ITE IT8987 Embedded Controller -# Analogix ANX7447 crosspoint switch -# -config BOARD_SPECIFIC_OPTIONS - def_bool y - select BOARD_ROMSIZE_KB_16384 if BOARD_STARLABS_LABTOP_CML - select BOARD_ROMSIZE_KB_8192 if BOARD_STARLABS_LABTOP_KBL - select DRIVERS_I2C_HID - select HAVE_ACPI_RESUME - select HAVE_ACPI_TABLES - select HAVE_SMI_HANDLER - select HAVE_SPD_IN_CBFS - select INTEL_GMA_HAVE_VBT - select INTEL_LPSS_UART_FOR_CONSOLE - select NO_UART_ON_SUPERIO - select SOC_INTEL_COMMON_BLOCK_HDA_VERB -# select HAVE_IFD_BIN -# select HAVE_ME_BIN - select MAINBOARD_HAS_LIBGFXINIT if BOARD_STARLABS_LABTOP_KBL - select EC_STARLABS_IT8987 if BOARD_STARLABS_LABTOP_CML || BOARD_STARLABS_LABTOP_KBL - select EC_STARLABS_IT_BIN if BOARD_STARLABS_LABTOP_CML - select SYSTEM_TYPE_LAPTOP - select SPI_FLASH_WINBOND if BOARD_STARLABS_LABTOP_CML - select SPI_FLASH_GIGADEVICE if BOARD_STARLABS_LABTOP_KBL - select DISABLE_ACPI_HIBERNATE - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - -config MAINBOARD_DIR - string - default "starlabs/labtop" - -config VARIANT_DIR - string - default "cml" if BOARD_STARLABS_LABTOP_CML - default "kbl" if BOARD_STARLABS_LABTOP_KBL - -config MAINBOARD_PART_NUMBER - string - default "LabTop Mk IV" if BOARD_STARLABS_LABTOP_CML - default "LabTop Mk III" if BOARD_STARLABS_LABTOP_KBL - -config MAINBOARD_FAMILY - string - default "L4" if BOARD_STARLABS_LABTOP_CML - default "L3" if BOARD_STARLABS_LABTOP_KBL - -config MAINBOARD_SMBIOS_PRODUCT_NAME - string - default "LabTop" - -config MAX_CPUS - int - default 8 if BOARD_STARLABS_LABTOP_KBL - default 12 - -#config DRIVER_TPM_SPI_CHIP -# int -# default 2 - -config UART_FOR_CONSOLE - int - default 2 - -config DEVICETREE - string - default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb" - -config DIMM_SPD_SIZE - int - default 512 - -config VBOOT - select VBOOT_LID_SWITCH - select VBOOT_MOCK_SECDATA - -config FMDFILE - string - default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/variants/\$(CONFIG_VARIANT_DIR)/board.fmd" - -config IFD_BIN_PATH - string - default "3rdparty/blobs/mainboard/\$(MAINBOARDDIR)/\$(CONFIG_VARIANT_DIR)/flashregion_0_flashdescriptor.bin" - -config ME_BIN_PATH - string - default "3rdparty/blobs/mainboard/\$(MAINBOARDDIR)/\$(CONFIG_VARIANT_DIR)/flashregion_2_intel_me.bin" - -config ME_STATE_BY_CMOS - bool - default y - -config EC_STARLABS_IT_BIN - bool - default n - default y if BOARD_STARLABS_LABTOP_CML - -config EC_STARLABS_IT_BIN_PATH - string - depends on EC_STARLABS_IT_BIN - default "3rdparty/blobs/mainboard/\$(MAINBOARDDIR)/\$(CONFIG_VARIANT_DIR)/flashregion_8_ec.bin" - -config VGA_BIOS_ID - string - default "8086,9b41" if BOARD_STARLABS_LABTOP_CML - default "8086,5917" if BOARD_STARLABS_LABTOP_KBL - -config TIANOCORE_BOOTSPLASH_FILE - string - depends on TIANOCORE_BOOTSPLASH_IMAGE - default "3rdparty/blobs/mainboard/starlabs/Logo.bmp" - -endif diff --git a/src/mainboard/starlabs/labtop/Kconfig.name b/src/mainboard/starlabs/labtop/Kconfig.name deleted file mode 100644 index 087f6d2726..0000000000 --- a/src/mainboard/starlabs/labtop/Kconfig.name +++ /dev/null @@ -1,9 +0,0 @@ -comment "Star Labs LabTop Mk IV" - -config BOARD_STARLABS_LABTOP_CML - bool "Star Labs LabTop Mk IV (i3-10110u and i7-10710u)" - select SOC_INTEL_COMETLAKE_1 - -config BOARD_STARLABS_LABTOP_KBL - bool "Star Labs LabTop Mk IV (i7-8550u)" - select SOC_INTEL_KABYLAKE diff --git a/src/mainboard/starlabs/labtop/Makefile.inc b/src/mainboard/starlabs/labtop/Makefile.inc deleted file mode 100644 index f89bda72f1..0000000000 --- a/src/mainboard/starlabs/labtop/Makefile.inc +++ /dev/null @@ -1,15 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -subdirs-y += ./spd -subdirs-y += variants/baseboard -CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include - -subdirs-y += variants/$(VARIANT_DIR) -CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include - -bootblock-y += bootblock.c - -ramstage-y += hda_verb.c -ramstage-y += mainboard.c -ramstage-y += ramstage.c -ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads diff --git a/src/mainboard/starlabs/labtop/acpi/ec.asl b/src/mainboard/starlabs/labtop/acpi/ec.asl deleted file mode 100644 index 853b0877b3..0000000000 --- a/src/mainboard/starlabs/labtop/acpi/ec.asl +++ /dev/null @@ -1 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ diff --git a/src/mainboard/starlabs/labtop/acpi/mainboard.asl b/src/mainboard/starlabs/labtop/acpi/mainboard.asl deleted file mode 100644 index 2abd1a7672..0000000000 --- a/src/mainboard/starlabs/labtop/acpi/mainboard.asl +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -Scope (\_SB) { - #include "sleep.asl" - - /* Power button device. */ - Device (PWRB) - { - Name (_HID, EisaId ("PNP0C0C")) - Name (PBST, One) - - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - } -} - -/* - * The Intel Comet Lake platform doesn't support SoundWire but there - * is a kernel bug in some 5.10.x releases. - * - * Debian testing live CD (at 4th Feb 2021) uses 5.10.9-1. More - * details can be found at https://bit.ly/3ttdffG but it appears to - * be triggered by missing SoundWire ACPI entries. - * - * Add the minimal set to make it work again. - */ -Scope (_SB.PCI0.HDAS) -{ - Device (SNDW) - { - Name (_ADR, 0x40000000) - - Name (_CID, Package (0x02) - { - "PRP00001", - "PNP0A05" - }) - - Method (_STA, 0, NotSerialized) - { - Return (0x0B) - } - } -} - -/* - * ITE IT8987E Embedded Controller - * - * We include this here as we need to support different levels within - * the ACPI DSDT tree structure. - */ - -#define EC_GPE_SWI 0x49 /* GPP_E15 */ -#define EC_GPE_SCI 0x50 /* GPP_E16 */ - -#include <ec/starlabs/it8987/acpi/ec.asl> diff --git a/src/mainboard/starlabs/labtop/acpi/sleep.asl b/src/mainboard/starlabs/labtop/acpi/sleep.asl deleted file mode 100644 index d8eb81838e..0000000000 --- a/src/mainboard/starlabs/labtop/acpi/sleep.asl +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -/* Method called from _PTS prior to enter sleep state */ -Method (MPTS, 1) -{ - \_SB.PCI0.LPCB.H_EC.PTS (Arg0) -} - -/* Method called from _WAK prior to wakeup */ -Method (MWAK, 1) -{ - \_SB.PCI0.LPCB.H_EC.WAK (Arg0) -} diff --git a/src/mainboard/starlabs/labtop/acpi/superio.asl b/src/mainboard/starlabs/labtop/acpi/superio.asl deleted file mode 100644 index 853b0877b3..0000000000 --- a/src/mainboard/starlabs/labtop/acpi/superio.asl +++ /dev/null @@ -1 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ diff --git a/src/mainboard/starlabs/labtop/board_info.txt b/src/mainboard/starlabs/labtop/board_info.txt deleted file mode 100644 index 95437453fd..0000000000 --- a/src/mainboard/starlabs/labtop/board_info.txt +++ /dev/null @@ -1,6 +0,0 @@ -Vendor name: Star Labs -Board name: LabTop Mk IV -Category: laptop -ROM protocol: SPI -ROM socketed: n -Flashrom support: y diff --git a/src/mainboard/starlabs/labtop/bootblock.c b/src/mainboard/starlabs/labtop/bootblock.c deleted file mode 100644 index 5d9cf027a7..0000000000 --- a/src/mainboard/starlabs/labtop/bootblock.c +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <soc/gpio.h> -#include <console/console.h> -#include <bootblock_common.h> - -#include "baseboard/variants.h" -#include "variant/gpio.h" - -void bootblock_mainboard_init(void) -{ - const struct pad_config *pads; - size_t num; - - pads = variant_early_gpio_table(&num); - gpio_configure_pads(pads, num); -} diff --git a/src/mainboard/starlabs/labtop/cmos.default b/src/mainboard/starlabs/labtop/cmos.default deleted file mode 100644 index 12b24401ef..0000000000 --- a/src/mainboard/starlabs/labtop/cmos.default +++ /dev/null @@ -1,7 +0,0 @@ -boot_option=Fallback -debug_level=Debug -power_on_after_fail=Disable -hyper_threading=Enable -kbl_timeout=30 seconds -fn_ctrl_swap=Disable -me_state=Disable diff --git a/src/mainboard/starlabs/labtop/cmos.layout b/src/mainboard/starlabs/labtop/cmos.layout deleted file mode 100644 index 3da79cc91f..0000000000 --- a/src/mainboard/starlabs/labtop/cmos.layout +++ /dev/null @@ -1,75 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -# ----------------------------------------------------------------- -entries - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 2 boot_option -388 4 h 0 reboot_counter - -# ----------------------------------------------------------------- -# coreboot config options: console -395 4 e 3 debug_level - -# coreboot config options: cpu -400 1 e 5 hyper_threading -401 1 e 5 vtd -409 1 e 5 me_state - -# coreboot config options: EC -512 3 e 4 kbl_timeout -520 1 e 1 fn_ctrl_swap - -# coreboot config options: southbridge -536 2 e 6 power_on_after_fail - -#408 1 h 1 preserve_smmstore - -# coreboot config options: check sums -984 16 h 0 check_sum - -# embedded controller settings (outwith the checksummed area) -1000 1 h 0 fn_lock_state - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable - -2 0 Fallback -2 1 Normal - -3 0 Emergency -3 1 Alert -3 2 Critical -3 3 Error -3 4 Warning -3 5 Notice -3 6 Info -3 7 Debug -3 8 Spew - -4 0 30 seconds -4 1 1 minute -4 2 3 minutes -4 3 5 minutes -4 4 Never - -5 0 Enable -5 1 Disable - -6 0 Disable -6 1 Enable -6 2 Keep - -# ----------------------------------------------------------------- -checksums - -checksum 392 983 984 diff --git a/src/mainboard/starlabs/labtop/dsdt.asl b/src/mainboard/starlabs/labtop/dsdt.asl deleted file mode 100644 index f3492dbfcb..0000000000 --- a/src/mainboard/starlabs/labtop/dsdt.asl +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <acpi/acpi.h> -DefinitionBlock( - "dsdt.aml", - "DSDT", - ACPI_DSDT_REV_2, - OEM_ID, - ACPI_TABLE_CREATOR, - 0x20110725 // OEM revision -) -{ - #include <acpi/dsdt_top.asl> - #include <soc/intel/common/block/acpi/acpi/platform.asl> -#if CONFIG(BOARD_STARLABS_LABTOP_CML) - #include <soc/intel/common/block/acpi/acpi/globalnvs.asl> -#else - #include <soc/intel/skylake/acpi/globalnvs.asl> -#endif - #include <cpu/intel/common/acpi/cpu.asl> - - Device (\_SB.PCI0) - { -#if CONFIG(BOARD_STARLABS_LABTOP_CML) - #include <soc/intel/common/block/acpi/acpi/northbridge.asl> - #include <soc/intel/cannonlake/acpi/southbridge.asl> -#else - #include <soc/intel/skylake/acpi/systemagent.asl> - #include <soc/intel/skylake/acpi/pch.asl> -#endif - #include <drivers/intel/gma/acpi/default_brightness_levels.asl> - } - - #include <southbridge/intel/common/acpi/sleepstates.asl> - - #include "acpi/mainboard.asl" -} diff --git a/src/mainboard/starlabs/labtop/hda_verb.c b/src/mainboard/starlabs/labtop/hda_verb.c deleted file mode 100644 index c26029774e..0000000000 --- a/src/mainboard/starlabs/labtop/hda_verb.c +++ /dev/null @@ -1,3 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include "variant/hda_verb.h" diff --git a/src/mainboard/starlabs/labtop/mainboard.c b/src/mainboard/starlabs/labtop/mainboard.c deleted file mode 100644 index 4fe4af32ad..0000000000 --- a/src/mainboard/starlabs/labtop/mainboard.c +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <smbios.h> -#include <types.h> -#include <uuid.h> - -#include <ec/starlabs/it8987/ec.h> - -/* Override the BIOS version using smbios_mainboard_bios_version() */ -const char *smbios_mainboard_bios_version(void) -{ - return "6"; -} - -/* Get the Embedded Controller firmware version */ -void smbios_ec_revision(uint8_t *ec_major_revision, uint8_t *ec_minor_revision) -{ - u16 ec_version = it8987_get_version(); - - *ec_major_revision = ec_version >> 8; - *ec_minor_revision = ec_version & 0xff; -} - -/* Override smbios_system_manufacturer */ -const char *smbios_system_manufacturer(void) -{ - return "Star Labs"; -} - -/* Override smbios_system_sku */ -const char *smbios_system_sku(void) -{ -#if CONFIG(BOARD_STARLABS_LABTOP_CML) - return "L4"; -#else - return "L3-U"; -#endif -} - -/* Override smbios_mainboard_features_flags */ -u8 smbios_mainboard_feature_flags(void) -{ - return SMBIOS_FEATURE_FLAG_HOSTING_BOARD | SMBIOS_FEATURE_FLAG_REPLACEABLE; -} - -/* Override smbios_mainboard_location_in_chassis */ -const char *smbios_mainboard_location_in_chassis(void) -{ - return "Default"; -} - -/* Override smbios_mainboard_board_type */ -smbios_board_type smbios_mainboard_board_type(void) -{ - return SMBIOS_BOARD_TYPE_MOTHERBOARD; -} - -/* Override smbios_mainboard_asset_tag */ -const char *smbios_mainboard_asset_tag(void) -{ - return "Default"; -} - -smbios_enclosure_type smbios_mainboard_enclosure_type(void) -{ - return SMBIOS_ENCLOSURE_NOTEBOOK; -} - -/* Override smbios_chassis_version */ -const char *smbios_chassis_version(void) -{ - return smbios_mainboard_version(); -} - -/* Override smbios_chassis_serial_number */ -const char *smbios_chassis_serial_number(void) -{ - return smbios_mainboard_serial_number(); -} - -/* Override smbios_chassis_asset_tag */ -const char *smbios_chassis_asset_tag(void) -{ - return CONFIG_MAINBOARD_SERIAL_NUMBER; -} diff --git a/src/mainboard/starlabs/labtop/ramstage.c b/src/mainboard/starlabs/labtop/ramstage.c deleted file mode 100644 index 5ba0778efd..0000000000 --- a/src/mainboard/starlabs/labtop/ramstage.c +++ /dev/null @@ -1,25 +0,0 @@ - -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <baseboard/variants.h> -#include <device/device.h> -#include <soc/ramstage.h> -#include <option.h> -#include "variant/gpio.h" - -#if CONFIG(BOARD_STARLABS_LABTOP_CML) -void mainboard_silicon_init_params(FSPS_UPD * supd) -#else -void mainboard_silicon_init_params(FSP_S_CONFIG *params) -#endif -{ - /* - * Configure pads prior to SiliconInit() in case there's any - * dependencies during hardware initialization. - */ - const struct pad_config *pads; - size_t num; - - pads = variant_gpio_table(&num); - gpio_configure_pads(pads, num); -} diff --git a/src/mainboard/starlabs/labtop/spd/Makefile.inc b/src/mainboard/starlabs/labtop/spd/Makefile.inc deleted file mode 100644 index 9e7f4e377e..0000000000 --- a/src/mainboard/starlabs/labtop/spd/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -# Schematics for this platform show Samsung K4A8G165WB-BCRC devices -# which are 8Gb, 2400Mbps 512Mx16 devices. -# -# The hardware platforms used for testing are fitted with a Micron part -# which has the FBGA identifier "D9ZFW". The identification tool at -# https://www.micron.com/support/tools-and-utilities/fbga identifies -# this as the MT40A1G16KD-062E:E. These are 16Gb, 1Gx16 devices. -# -# We have defined both SPD options below. -SPD_SOURCES = empty_ddr4 # 0b0000 -SPD_SOURCES += micron-MT40A1G16KD-062E-E # 0b0001 -SPD_SOURCES += empty_ddr4 # 0b0010 -SPD_SOURCES += empty_ddr4 # 0b0011 -SPD_SOURCES += empty_ddr4 # 0b0100 -SPD_SOURCES += empty_ddr4 # 0b0101 -SPD_SOURCES += samsung-K4A8G165WB-BCRC # 0b0110 -SPD_SOURCES += samsung-K4A8G165WB-BCRC # 0b0111 - -LIB_SPD_DEPS = $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/spd/$(f).spd.hex) diff --git a/src/mainboard/starlabs/labtop/spd/empty_ddr4.spd.hex b/src/mainboard/starlabs/labtop/spd/empty_ddr4.spd.hex deleted file mode 100644 index 67b46cd239..0000000000 --- a/src/mainboard/starlabs/labtop/spd/empty_ddr4.spd.hex +++ /dev/null @@ -1,32 +0,0 @@ -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/starlabs/labtop/spd/micron-MT40A1G16KD-062E-E.spd.hex b/src/mainboard/starlabs/labtop/spd/micron-MT40A1G16KD-062E-E.spd.hex deleted file mode 100644 index 17778473af..0000000000 --- a/src/mainboard/starlabs/labtop/spd/micron-MT40A1G16KD-062E-E.spd.hex +++ /dev/null @@ -1,33 +0,0 @@ -# Micron MT40A1G16KD-062E:E -23 11 0C 03 46 29 00 08 00 60 00 03 02 03 00 00 -00 00 05 0D F8 FF 2B 00 6E 6E 6E 11 00 6E F0 0A -20 08 00 05 00 F0 2B 34 28 00 78 00 14 3C 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 9C B5 00 00 00 00 E7 00 7C A0 -0F 01 1F 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 21 7D -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -80 2C 00 00 00 00 00 00 00 4D 54 34 30 41 31 47 -31 36 4B 44 2D 30 36 32 45 3A 45 20 20 31 80 2C -45 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/starlabs/labtop/spd/samsung-K4A8G165WB-BCRC.spd.hex b/src/mainboard/starlabs/labtop/spd/samsung-K4A8G165WB-BCRC.spd.hex deleted file mode 100644 index 36b85a2035..0000000000 --- a/src/mainboard/starlabs/labtop/spd/samsung-K4A8G165WB-BCRC.spd.hex +++ /dev/null @@ -1,33 +0,0 @@ -# K4A8G165WB-BCRC -23 11 0C 03 45 21 00 08 00 60 00 03 02 03 00 00 -00 00 07 0D F8 0F 00 00 6E 6E 6E 11 00 6E F0 0A -20 08 00 05 00 F0 2B 34 28 00 78 00 14 3C 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 16 36 0B 35 -16 36 0B 35 00 00 16 36 0B 35 16 36 0B 35 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 9C B5 00 00 00 00 E7 D6 0B E3 -0F 11 02 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 DB 08 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -80 CE 00 00 00 00 00 00 00 4D 34 37 31 41 35 32 -34 34 42 42 30 2D 43 52 43 20 20 20 20 00 80 CE -FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 diff --git a/src/mainboard/starlabs/labtop/spd/spd.h b/src/mainboard/starlabs/labtop/spd/spd.h deleted file mode 100644 index 6cd94169f0..0000000000 --- a/src/mainboard/starlabs/labtop/spd/spd.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef MAINBOARD_SPD_H -#define MAINBOARD_SPD_H - -#include <gpio.h> -#include <variant/gpio.h> - -void mainboard_fill_dq_map_data(void *dq_map_ptr); -void mainboard_fill_dqs_map_data(void *dqs_map_ptr); -void mainboard_fill_rcomp_res_data(void *rcomp_ptr); -void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr); -#endif diff --git a/src/mainboard/starlabs/labtop/spd/spd_util.c b/src/mainboard/starlabs/labtop/spd/spd_util.c deleted file mode 100644 index 7d23dfb293..0000000000 --- a/src/mainboard/starlabs/labtop/spd/spd_util.c +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <stdint.h> -#include <string.h> - -#include "spd.h" - -void mainboard_fill_dq_map_data(void *dq_map_ptr) -{ - /* DQ byte map */ - const u8 dq_map[2][12] = { - {0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0, 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00}, - {0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC, 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00} }; - memcpy(dq_map_ptr, dq_map, sizeof(dq_map)); -} - -void mainboard_fill_dqs_map_data(void *dqs_map_ptr) -{ - /* DQS CPU<>DRAM map */ - const u8 dqs_map[2][8] = {{0, 6, 3, 1, 5, 2, 7, 4}, {7, 5, 3, 6, 2, 4, 0, 1} }; - memcpy(dqs_map_ptr, dqs_map, sizeof(dqs_map)); -} - -void mainboard_fill_rcomp_res_data(void *rcomp_ptr) -{ - /* Rcomp resistor */ - const u16 RcompResistor[3] = {121, 81, 100}; - memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor)); -} - -void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr) -{ - /* Rcomp target */ - static const u16 RcompTarget[5] = {100, 40, 20, 20, 26}; - - memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget)); -} diff --git a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/memory.h b/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/memory.h deleted file mode 100644 index 47e2688a56..0000000000 --- a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/memory.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef MEMORY_H -#define MEMORY_H - -u8 get_memory_config_straps(void); -const struct cnl_mb_cfg *get_memory_cfg(struct cnl_mb_cfg *mem_cfg); - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/romstage.h b/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/romstage.h deleted file mode 100644 index cfcc6ab08d..0000000000 --- a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/romstage.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef VARIANT_ROMSTAGE_H -#define VARIANT_ROMSTAGE_H - -void variant_configure_fspm(FSPM_UPD *memupd); - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/variants.h b/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/variants.h deleted file mode 100644 index 454749ff3a..0000000000 --- a/src/mainboard/starlabs/labtop/variants/baseboard/include/baseboard/variants.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _BASEBOARD_VARIANTS_H_ -#define _BASEBOARD_VARIANTS_H_ - -#include <soc/gpio.h> - -/* - * The next set of functions return the gpio table and fill in the number of - * entries for each table. - */ -const struct pad_config *variant_gpio_table(size_t *num); -const struct pad_config *variant_early_gpio_table(size_t *num); - -#endif /* _BASEBOARD_VARIANTS_H_ */ diff --git a/src/mainboard/starlabs/labtop/variants/cml/Makefile.inc b/src/mainboard/starlabs/labtop/variants/cml/Makefile.inc deleted file mode 100644 index 79b824bef7..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/Makefile.inc +++ /dev/null @@ -1,3 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -romstage-y += romstage.c diff --git a/src/mainboard/starlabs/labtop/variants/cml/board.fmd b/src/mainboard/starlabs/labtop/variants/cml/board.fmd deleted file mode 100644 index 9018104edd..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/board.fmd +++ /dev/null @@ -1,14 +0,0 @@ -# -# Manually defined FMD in order to ensure that space is reserved for the EC -# at the top of the BIOS region. -# -FLASH 16M { - BIOS@0x400000 0xC00000 { - EC@0x0 0x20000 - RW_MRC_CACHE@0x20000 0x10000 - SMMSTORE@0x30000 0x40000 - CONSOLE@0x70000 0x20000 - FMAP@0x90000 0x200 - COREBOOT(CBFS) - } -} diff --git a/src/mainboard/starlabs/labtop/variants/cml/data.vbt b/src/mainboard/starlabs/labtop/variants/cml/data.vbt Binary files differdeleted file mode 100644 index bae92100eb..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/data.vbt +++ /dev/null diff --git a/src/mainboard/starlabs/labtop/variants/cml/devicetree.cb b/src/mainboard/starlabs/labtop/variants/cml/devicetree.cb deleted file mode 100644 index a6773f1e12..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/devicetree.cb +++ /dev/null @@ -1,186 +0,0 @@ -chip soc/intel/cannonlake - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - /* Touchpad */ - .i2c[0] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 80, - .fall_time_ns = 110, - }, - }" - -# CPU (soc/intel/cannonlake/cpu.c) - # Power limit - register "power_limits_config" = "{ - .tdp_pl1_override = 15, - .tdp_pl2_override = 20, - }" - - # Enable Enhanced Intel SpeedStep - register "eist_enable" = "1" - -# Graphics (soc/intel/cannonlake/graphics.c) - # IGD Displays - register "gfx" = "GMA_STATIC_DISPLAYS(0)" - -# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c) - # FSP configuration - register "SaGv" = "SaGv_Enabled" - register "enable_c6dram" = "1" - -# FSP Silicon (soc/intel/cannonlake/fsp_params.c) - # Serial I/O - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexUART2] = PchSerialIoSkipInit, - }" - - # Misc - register "AcousticNoiseMitigation" = "1" - - # Power - register "PchPmSlpS3MinAssert" = "2" # 50ms - register "PchPmSlpS4MinAssert" = "3" # 1s - register "PchPmSlpSusMinAssert" = "3" # 500ms - register "PchPmSlpAMinAssert" = "3" # 2s - - # Thermal - register "tcc_offset" = "10" - - # Enable eDP device - # register "DdiPortEdp" = "1" - -# PM Util (soc/intel/cannonlake/pmutil.c) - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG) - register "gpe0_dw0" = "PMC_GPP_B" - register "gpe0_dw1" = "PMC_GPP_C" - register "gpe0_dw2" = "PMC_GPP_E" - -# Actual device tree. - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 04.0 on # SA Thermal Device - register "Device4Enable" = "1" - end - device pci 12.0 on end # Thermal Subsystem - device pci 12.5 off end # UFS SCS - device pci 12.6 off end # GSPI #2 - device pci 14.0 on # USB xHCI - # USB2 - register "usb2_ports[0]" = "USB2_PORT_MID(OC2)" # Type-C Port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Bluetooth - register "usb2_ports[3]" = "USB2_PORT_MID(OC2)" # SD Card - register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-A Port 3 - register "usb2_ports[6]" = "USB2_PORT_MID(OC3)" # Camera - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CNVi Bluetooth - # USB3 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" - end - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.3 on # CNVi wifi - chip drivers/wifi/generic - register "wake" = "GPE0_PME_B0" - device generic 0 on end - end - end - device pci 14.5 off end # SDCard - device pci 15.0 on # I2C #0 - chip drivers/i2c/hid - register "generic.hid" = ""StarPoint"" - register "generic.desc" = ""Touchpad"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "generic.probed" = "1" - register "hid_desc_reg_offset" = "0x20" - device i2c 2c on end - end - end - device pci 15.1 off end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 16.5 off end # Management Engine Interface 4 - device pci 17.0 on # SATA - register "SataSalpSupport" = "1" - # Port 1 - register "SataPortsEnable[1]" = "1" - register "SataPortsDevSlp[1]" = "1" - # Port 2 - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[2]" = "1" - end - device pci 19.0 off end # I2C #4 - device pci 19.1 off end # I2C #5 - device pci 19.2 on end # UART #2 - device pci 1a.0 off end # eMMC - not fitted - device pci 1c.0 off end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 on # PCI Express Port 9 (SSD x4) - device pci 00.0 on end - register "PcieRpSlotImplemented[8]" = "1" - register "PcieRpEnable[8]" = "1" - register "PcieRpLtrEnable[8]" = "1" - register "PcieClkSrcUsage[1]" = "8" - register "PcieClkSrcClkReq[1]" = "1" - smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X" - end - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1d.4 off end # PCI Express Port 13 (LAN) - device pci 1d.5 off end # PCI Express Port 14 (WLAN) - device pci 1d.6 off end # PCI Express Port 15 - device pci 1d.7 off end # PCI Express Port 16 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1f.0 on # LPC Interface - # LPC configuration from lspci -s 1f.0 -xxx - # Address 0x84: Decode 0x680 - 0x68F - register "gen1_dec" = "0x000c0681" - # Address 0x88: Decode - register "gen2_dec" = "0x000c1641" - # Address 0x8C: Decode 0x200 - 0x2FF - register "gen3_dec" = "0x00fc0201" - # Address 0x90: Decode 0x80 - 0x8F (Port 80) - register "gen4_dec" = "0x000c0081" - - chip ec/starlabs/it8987 - # Port 4Eh/4Fh - device pnp 4e.0 on # IO Interface - end - end - end - device pci 1f.1 off end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on # Intel HDA - subsystemid 0x10ec 0x119e - register "PchHdaAudioLinkHda" = "1" - end - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/starlabs/labtop/variants/cml/gma-mainboard.ads b/src/mainboard/starlabs/labtop/variants/cml/gma-mainboard.ads deleted file mode 100644 index 8402b39a94..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/gma-mainboard.ads +++ /dev/null @@ -1,18 +0,0 @@ --- SPDX-License-Identifier: GPL-2.0-or-later - -with HW.GFX.GMA; -with HW.GFX.GMA.Display_Probing; - -use HW.GFX.GMA; -use HW.GFX.GMA.Display_Probing; - -private package GMA.Mainboard is - - ports : constant Port_List := - (DP1, -- USB-C - HDMI1, -- USB-C - HDMI2, -- HDMI - eDP, - others => Disabled); - -end GMA.Mainboard; diff --git a/src/mainboard/starlabs/labtop/variants/cml/include/variant/gpio.h b/src/mainboard/starlabs/labtop/variants/cml/include/variant/gpio.h deleted file mode 100644 index a20be3122b..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/include/variant/gpio.h +++ /dev/null @@ -1,225 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _VARIANT_GPIO_H_ -#define _VARIANT_GPIO_H_ - -#include "baseboard/variants.h" - -#ifndef __ACPI__ - -/* - * All definitions are taken from a comparison of the output of "inteltool -a" - * using the stock BIOS and with coreboot. - */ - -/* Early pad configuration in romstage.c */ -const struct pad_config early_gpio_table[] = { - PAD_CFG_GPO(GPP_E22, 1, PLTRST), - PAD_CFG_GPO(GPP_E23, 1, PLTRST), - PAD_CFG_GPI(GPP_H6, NONE, PLTRST), - PAD_CFG_GPI(GPP_H7, NONE, PLTRST), -}; - -const struct pad_config *variant_early_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(early_gpio_table); - return early_gpio_table; -} - -/* Pad configuration in ramstage.c */ -const struct pad_config gpio_table[] = { - PAD_CFG_NF(GPD0, NONE, PWROK, NF1), - PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1), - PAD_CFG_NF(GPD2, NATIVE, PWROK, NF1), - PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), - PAD_CFG_NF(GPD4, NONE, PWROK, NF1), - PAD_CFG_NF(GPD5, NONE, PWROK, NF1), - PAD_CFG_NF(GPD6, NONE, PWROK, NF1), - PAD_CFG_GPO(GPD7, 0, PWROK), - PAD_CFG_NF(GPD8, NONE, PWROK, NF1), - PAD_CFG_NF(GPD9, NONE, PWROK, NF1), - PAD_CFG_NF(GPD10, NONE, PWROK, NF1), - PAD_CFG_NF(GPD11, NONE, PWROK, NF1), - PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), - PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), - PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), - PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), - PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_A7, 0x40100100, 0x3000), - PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), - PAD_CFG_NF(GPP_A10, DN_20K, DEEP, NF1), - PAD_CFG_NF(GPP_A11, UP_20K, DEEP, NF1), - PAD_NC(GPP_A12, NONE), - PAD_CFG_GPO(GPP_A13, 1, PLTRST), - PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_A15, 1, PLTRST), - PAD_CFG_TERM_GPO(GPP_A16, 1, UP_20K, PLTRST), - PAD_NC(GPP_A17, NONE), - PAD_NC(GPP_A18, UP_20K), - PAD_NC(GPP_A19, UP_20K), - PAD_NC(GPP_A20, UP_20K), - PAD_NC(GPP_A21, UP_20K), - PAD_NC(GPP_A22, UP_20K), - PAD_NC(GPP_A23, UP_20K), - PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_B3, 0x80100100, 0x0000), - PAD_CFG_GPO(GPP_B4, 1, DEEP), - PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_B11, 1, PLTRST), - PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_B14, 1, PLTRST), - PAD_CFG_TERM_GPO(GPP_B15, 1, UP_20K, PLTRST), - _PAD_CFG_STRUCT(GPP_B16, 0x80100100, 0x0000), - PAD_CFG_GPO(GPP_B17, 1, PLTRST), - PAD_CFG_GPO(GPP_B18, 0, DEEP), - PAD_NC(GPP_B19, NONE), - PAD_NC(GPP_B20, NONE), - PAD_NC(GPP_B21, NONE), - PAD_CFG_GPO(GPP_B22, 0, DEEP), - PAD_CFG_GPO(GPP_B23, 1, DEEP), - PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_C2, 1, DEEP), - PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_C5, 0x40880100, 0x0000), - PAD_NC(GPP_C6, NONE), - PAD_NC(GPP_C7, NONE), - _PAD_CFG_STRUCT(GPP_C8, 0x80100100, 0x3000), - _PAD_CFG_STRUCT(GPP_C9, 0x82880100, 0x3000), - PAD_CFG_GPO(GPP_C10, 0, PLTRST), - _PAD_CFG_STRUCT(GPP_C11, 0x40100100, 0x0000), - PAD_CFG_GPO(GPP_C12, 1, PLTRST), - PAD_NC(GPP_C13, NONE), - PAD_NC(GPP_C14, NONE), - PAD_CFG_GPO(GPP_C15, 1, PLTRST), - PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), - PAD_NC(GPP_C18, NONE), - PAD_NC(GPP_C19, NONE), - PAD_NC(GPP_C20, NONE), - PAD_NC(GPP_C21, NONE), - PAD_NC(GPP_C22, NONE), - PAD_NC(GPP_C23, NONE), - PAD_NC(GPP_D0, NONE), - PAD_NC(GPP_D1, NONE), - PAD_NC(GPP_D2, NONE), - PAD_NC(GPP_D3, NONE), - PAD_NC(GPP_D4, NONE), - PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), - PAD_NC(GPP_D7, NONE), - PAD_NC(GPP_D8, NONE), - PAD_CFG_GPO(GPP_D9, 1, PLTRST), - _PAD_CFG_STRUCT(GPP_D10, 0x80100100, 0x0000), - _PAD_CFG_STRUCT(GPP_D11, 0x40880100, 0x3000), - PAD_CFG_GPO(GPP_D12, 0, DEEP), - PAD_NC(GPP_D13, NONE), - PAD_CFG_GPO(GPP_D14, 1, PLTRST), - PAD_CFG_GPO(GPP_D15, 1, PLTRST), - PAD_CFG_GPO(GPP_D16, 0, PWROK), - PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1), - PAD_NC(GPP_D21, NONE), - PAD_NC(GPP_D22, NONE), - PAD_NC(GPP_D23, NONE), - PAD_NC(GPP_E0, NONE), - PAD_CFG_NF(GPP_E1, UP_20K, DEEP, NF1), - PAD_CFG_GPI(GPP_E2, UP_20K, PLTRST), - _PAD_CFG_STRUCT(GPP_E3, 0x82040100, 0x0000), - _PAD_CFG_STRUCT(GPP_E4, 0x80880100, 0x3000), - PAD_NC(GPP_E5, NONE), - PAD_NC(GPP_E6, NONE), - PAD_CFG_GPI(GPP_E7, NONE, PLTRST), - PAD_NC(GPP_E8, NONE), - _PAD_CFG_STRUCT(GPP_E9, 0x44001700, 0x0000), - _PAD_CFG_STRUCT(GPP_E10, 0x44001700, 0x0000), - PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_E15, 1, PLTRST), - _PAD_CFG_STRUCT(GPP_E16, 0x80880100, 0x3000), - PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_F0, 0x00000301, 0x0000), - PAD_CFG_GPO(GPP_F1, 0, PWROK), - PAD_CFG_TERM_GPO(GPP_F2, 1, UP_20K, PLTRST), - _PAD_CFG_STRUCT(GPP_F3, 0x84000300, 0x3000), - PAD_CFG_NF(GPP_F4, UP_20K, DEEP, NF1), - PAD_CFG_NF(GPP_F5, UP_20K, DEEP, NF1), - PAD_CFG_NF(GPP_F6, UP_20K, DEEP, NF1), - PAD_CFG_NF(GPP_F7, UP_20K, DEEP, NF1), - PAD_NC(GPP_F8, NONE), - PAD_NC(GPP_F9, NONE), - PAD_CFG_GPI(GPP_F10, UP_20K, PLTRST), - PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_F23, DN_20K, DEEP, NF1), - PAD_NC(GPP_G0, NONE), - PAD_NC(GPP_G1, NONE), - PAD_NC(GPP_G2, NONE), - PAD_NC(GPP_G3, NONE), - PAD_NC(GPP_G4, NONE), - PAD_NC(GPP_G5, UP_20K), - PAD_NC(GPP_G6, NONE), - PAD_NC(GPP_G7, DN_20K), - PAD_NC(GPP_H0, UP_20K), - PAD_CFG_NF(GPP_H1, UP_20K, DEEP, NF3), - PAD_CFG_NF(GPP_H2, UP_20K, DEEP, NF3), - PAD_NC(GPP_H3, UP_20K), - PAD_NC(GPP_H4, NONE), - PAD_NC(GPP_H5, NONE), - PAD_NC(GPP_H8, NONE), - PAD_NC(GPP_H9, NONE), - PAD_CFG_GPO(GPP_H10, 1, PLTRST), - PAD_CFG_GPO(GPP_H11, 1, PLTRST), - PAD_CFG_GPO(GPP_H12, 1, PLTRST), - PAD_CFG_GPO(GPP_H13, 1, PLTRST), - PAD_CFG_GPO(GPP_H14, 1, PLTRST), - PAD_CFG_GPO(GPP_H15, 1, PLTRST), - PAD_NC(GPP_H16, NONE), - PAD_CFG_GPO(GPP_H17, 0, DEEP), - PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), - PAD_CFG_GPO(GPP_H19, 1, PLTRST), - _PAD_CFG_STRUCT(GPP_H20, 0x84000300, 0x0000), - PAD_CFG_GPO(GPP_H21, 0, DEEP), - PAD_CFG_GPO(GPP_H22, 1, PLTRST), - PAD_CFG_GPO(GPP_H23, 0, DEEP), -}; - -const struct pad_config *variant_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(gpio_table); - return gpio_table; -} - -#endif - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/cml/include/variant/hda_verb.h b/src/mainboard/starlabs/labtop/variants/cml/include/variant/hda_verb.h deleted file mode 100644 index 190474f6d1..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/include/variant/hda_verb.h +++ /dev/null @@ -1,155 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _HDA_VERB_H_ -#define _HDA_VERB_H_ - -#include <device/azalia_device.h> -#include <device/azalia.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0256, // Codec Vendor / Device ID: Realtek ALC256 - 0xffffffff, // Subsystem ID - 0x0000002b, // Number of jacks (NID entries) - - /* Rest Codec First */ - AZALIA_RESET(0x1), - - /* HDA Codec Subsystem ID Verb-table - HDA Codec Subsystem ID: 0x10EC119E */ - 0x0017209E, - 0x00172111, - 0x001722EC, - 0x00172310, - /* Pin Widget Verb-table */ - AZALIA_PIN_CFG(0, 0x01, 0x00000000), - AZALIA_PIN_CFG(0, 0x12, 0x90a61120), - AZALIA_PIN_CFG(0, 0x13, 0x40000000), - AZALIA_PIN_CFG(0, 0x14, 0x90171110), - AZALIA_PIN_CFG(0, 0x18, 0x411111f0), - AZALIA_PIN_CFG(0, 0x19, 0x02ab1020), - AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), - AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), - AZALIA_PIN_CFG(0, 0x1d, 0x411111f0), - AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), - AZALIA_PIN_CFG(0, 0x21, 0x022b1010), - /* ONE DOES NOT SIMPLY - MAKE IT WORK WITH WINDOWS */ - /* RESET to D0 */ - 0x00170500, - 0x00170500, - 0x00170500, - 0x00170500, - /* RESET Register */ - 0x0205001A, - 0x02048003, - 0x0205001A, - 0x0204C003, - /* ALC256 default-1(Class D RESET) */ - 0x0205003C, - 0x02040354, - 0x0205003C, - 0x02040314, - /* ALC256 default-2 */ - 0x02050040, - 0x02049800, - 0x02050034, - 0x0204023C, - /* ALC256 Speaker output power - 4 ohm 2.2W (+12dB gain) + Combo Jack TRS setting */ - 0x02050038, - 0x02047901, - 0x02050045, - 0x02045089, - /* H/W AGC setting-1 */ - 0x02050016, - 0x02040C50, - 0x02050012, - 0x0204EBC2, - /* H/W AGC setting-2 */ - 0x02050013, - 0x0204401D, - 0x02050016, - 0x02044E50, - /* Zero data + EAPD to verb-control */ - 0x02050037, - 0x0204FE15, - 0x02050010, - 0x02040020, - /* Zero data */ - 0x02050030, - 0x02048000, - 0x02050030, - 0x02048000, - /* ALC256 default-3 */ - 0x05750003, - 0x05740DA3, - 0x02050046, - 0x02040004, - /* ALC256 default-4 */ - 0x0205001B, - 0x02040A4B, - 0x02050008, - 0x02046A6C, - /* JD1 */ - 0x02050009, - 0x0204E003, - 0x0205000A, - 0x02047770, - /* Microphone + Array MIC security Disable +ADC clock Enable */ - 0x0205000D, - 0x0204A020, - 0x02050005, - 0x02040700, - /* Speaker Enable */ - 0x0205000C, - 0x020401EF, - 0x0205000C, - 0x020401EF, - /* EQ Bypass + EQ HPF cutoff 250Hz */ - 0x05350000, - 0x0534201A, - 0x0535001d, - 0x05340800, - /* EQ-2 */ - 0x0535001e, - 0x05340800, - 0x05350003, - 0x05341EF8, - /* EQ-3 */ - 0x05350004, - 0x05340000, - 0x05450000, - 0x05442000, - /* EQ-4 */ - 0x0545001d, - 0x05440800, - 0x0545001e, - 0x05440800, - /* EQ-5 */ - 0x05450003, - 0x05441EF8, - 0x05450004, - 0x05440000, - /* EQ Update */ - 0x05350000, - 0x0534E01A, - 0x05350000, - 0x0534E01A, - - 0x8086280b, /* Codec Vendor / Device ID: Intel */ - 0x80860101, /* Subsystem ID */ - 0x00000004, /* Number of 4 dword sets */ - - AZALIA_SUBVENDOR(2, 0x80860101), - - AZALIA_PIN_CFG(2, 0x05, 0x18560010), - AZALIA_PIN_CFG(2, 0x06, 0x18560010), - AZALIA_PIN_CFG(2, 0x07, 0x18560010), -}; - -const u32 pc_beep_verbs[] = { -}; - -AZALIA_ARRAY_SIZES; - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/cml/romstage.c b/src/mainboard/starlabs/labtop/variants/cml/romstage.c deleted file mode 100644 index 389a91c25a..0000000000 --- a/src/mainboard/starlabs/labtop/variants/cml/romstage.c +++ /dev/null @@ -1,119 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <option.h> -#include <soc/cnl_memcfg_init.h> -#include <soc/romstage.h> -#include <console/console.h> -#include <gpio.h> -#include <string.h> -#include <types.h> - -#include "baseboard/memory.h" - -u8 get_memory_config_straps(void) -{ - /* - * The hardware supports a number of different memory configurations - * which are selected using four ID bits ID3 (GPP_H7), ID2 (GPP_H6), - * ID1 (GPP_E23) and ID0 (GPP_E22). - * - * The mapping is defined in the schematics as follows ID3 is always - * 0 and can be ignored): - * - * ID2ID1ID0Memory type - * -------------------- - * 1 1 1 Samsung 4G single channel - * 1 1 0 Samsung 8G dual channel - * 1 0 1 Micron 4G single channel - * 1 0 0 Micron 8G dual channel - * 0 1 1 Hynix 4G single channel - * 0 1 0 Hynix 8G dual channel - * 0 0 1 Micron 16G dual channel - * 0 0 0 Hynix 16G dual channel - * - * We return the value of these bits so that the index into the SPD - * table can be .spd[] values can be configured correctly in the - * memory configuration structure. - */ - - gpio_t memid_gpios[] = { - GPP_E22, - GPP_E23, - GPP_H6 - }; - return (u8)gpio_base2_value(memid_gpios, ARRAY_SIZE(memid_gpios)); -} - -const struct cnl_mb_cfg *get_memory_cfg(struct cnl_mb_cfg *mem_cfg) -{ - u8 memid; - - struct cnl_mb_cfg std_memcfg = { - /* - * The dqs_map arrays map the DDR4 pins to the SoC pins - * for both channels. - * - * the index = pin number on DDR4 part - * the value = pin number on SoC - */ - .dqs_map[DDR_CH0] = {0, 6, 1, 3, 5, 2, 7, 4}, - .dqs_map[DDR_CH1] = {7, 5, 3, 6, 2, 4, 0, 1}, - - /* - * Mainboard uses 121, 81 and 100 rcomp resistors. See R6E1, R6E2 - * and R6E3 on page 6 of the schematics. - */ - .rcomp_resistor = {121, 81, 100}, - - /* - * Mainboard Rcomp target values. - */ - .rcomp_targets = {100, 40, 20, 20, 26}, - - /* - * Mainboard is a non-interleaved design - see pages 5 & 6 - * of the schematics. - */ - .dq_pins_interleaved = 0, - - /* - * Mainboard is using DDR_VREF_CA for CH_A and DDR1_VREF_DQ for - * CH_B - see page 5 of the schematics. - */ - .vref_ca_config = 2, - - /* Disable Early Command Training */ - .ect = 0, - }; - - memcpy(mem_cfg, &std_memcfg, sizeof(std_memcfg)); - - memid = get_memory_config_straps(); - printk(BIOS_DEBUG, "Memory config straps: 0x%.2x\n", memid); - - /* - * If we are using single channel ID = 3, 5 or 7 then we only - * populate .spd[0].If we are dual channel then we also populate - * .spd[2] as well. - */ - mem_cfg->spd[0].read_type = READ_SPD_CBFS; - mem_cfg->spd[0].spd_spec.spd_index = memid; - if (memid != 3 && memid != 5 && memid != 7) { - mem_cfg->spd[2].read_type = READ_SPD_CBFS; - mem_cfg->spd[2].spd_spec.spd_index = memid; - } - - return mem_cfg; -}; - -void mainboard_memory_init_params(FSPM_UPD *memupd) -{ - struct cnl_mb_cfg board_memcfg; - - const uint8_t vtd = get_uint_option("vtd", 1); - memupd->FspmTestConfig.VtdDisable = !vtd; - const uint8_t ht = get_uint_option("hyper_threading", memupd->FspmConfig.HyperThreading); - memupd->FspmConfig.HyperThreading = ht; - - cannonlake_memcfg_init(&memupd->FspmConfig, get_memory_cfg(&board_memcfg)); -} diff --git a/src/mainboard/starlabs/labtop/variants/kbl/Makefile.inc b/src/mainboard/starlabs/labtop/variants/kbl/Makefile.inc deleted file mode 100644 index e04a8dba30..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/Makefile.inc +++ /dev/null @@ -1,4 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only -CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR) - -romstage-y += romstage.c diff --git a/src/mainboard/starlabs/labtop/variants/kbl/board.fmd b/src/mainboard/starlabs/labtop/variants/kbl/board.fmd deleted file mode 100644 index 08bc519499..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/board.fmd +++ /dev/null @@ -1,13 +0,0 @@ -# -# Manually defined FMD in order to ensure that space is reserved for the EC -# at the top of the BIOS region. -# -FLASH 8M { - BIOS@0x200000 0x600000 { - RW_MRC_CACHE@0x0 0x10000 - SMMSTORE@0x10000 0x40000 - CONSOLE@0x50000 0x20000 - FMAP@0x70000 0x200 - COREBOOT(CBFS) - } -} diff --git a/src/mainboard/starlabs/labtop/variants/kbl/data.vbt b/src/mainboard/starlabs/labtop/variants/kbl/data.vbt Binary files differdeleted file mode 100644 index b7146c52ec..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/data.vbt +++ /dev/null diff --git a/src/mainboard/starlabs/labtop/variants/kbl/devicetree.cb b/src/mainboard/starlabs/labtop/variants/kbl/devicetree.cb deleted file mode 100644 index d052352cea..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/devicetree.cb +++ /dev/null @@ -1,203 +0,0 @@ -chip soc/intel/skylake - # Disable DEEP - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "0" - register "deep_s5_enable_dc" = "0" - register "deep_sx_config" = "DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD" - - # Enable "Intel Speed Shift Technology" - register "eist_enable" = "1" - - # Disable DPTF - register "dptf_enable" = "0" - - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - # Send an extra VR mailbox command for the PS4 exit issue - # register "SendVrMbxCmd" = "2" - -# Graphics (soc/intel/skylake/graphics.c) - register "panel_cfg" = "{ - .up_delay_ms= 200,// T3 - .down_delay_ms= 0,// T10 - .cycle_delay_ms = 500,// T12 - .backlight_on_delay_ms=50,// T7 - .backlight_off_delay_ms = 0,// T9 - .backlight_pwm_hz = 200, - }" - - # IGD Displays - register "gfx" = "GMA_STATIC_DISPLAYS(0)" - -# CPU (soc/intel/skylake/chip.c) - # Power limit - register "power_limits_config" = "{ - .tdp_pl1_override = 20, - .tdp_pl2_override = 30, - }" - - # FSP configuration - register "SaGv" = "SaGv_Enabled" - - # Serial I/O - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0]= PchSerialIoPci, - [PchSerialIoIndexI2C1]= PchSerialIoPci, - [PchSerialIoIndexI2C2]= PchSerialIoPci, - [PchSerialIoIndexI2C3]= PchSerialIoPci, - [PchSerialIoIndexI2C4]= PchSerialIoDisabled, - [PchSerialIoIndexI2C5]= PchSerialIoPci, - [PchSerialIoIndexSpi0]= PchSerialIoPci, - [PchSerialIoIndexSpi1]= PchSerialIoPci, - [PchSerialIoIndexUart0] = PchSerialIoSkipInit, - [PchSerialIoIndexUart1] = PchSerialIoDisabled, - [PchSerialIoIndexUart2] = PchSerialIoSkipInit, - }" - - # Power - register "PmConfigSlpS3MinAssert" = "3" # 50ms - register "PmConfigSlpS4MinAssert" = "3" # 1s - register "PmConfigSlpSusMinAssert" = "3" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - - # Thermal - register "tcc_offset" = "5" - -# PM Util (soc/intel/skylake/pmutil.c) - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - # sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG) - register "gpe0_dw0" = "GPP_B" - register "gpe0_dw1" = "GPP_C" - register "gpe0_dw2" = "GPP_E" - - # Enable the correct decode ranges on the LPC bus. - register "lpc_ioe" = "LPC_IOE_EC_4E_4F | LPC_IOE_KBC_60_64 | LPC_IOE_EC_62_66" - -# Actual device tree. - device cpu_cluster 0 on - device lapic 0 on end - end - - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 04.0 on end # SA Thermal Device - device pci 14.0 on # USB xHCI - # USB2 - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C port 1 - register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A port 2 - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # uSD Card - register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-A port 3 - register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # Camera - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Actual Bluetooth port - - # USB3 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" - end - device pci 14.1 off end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on # I2C #0 - chip drivers/i2c/hid - register "generic.hid" = ""StarPoint"" - register "generic.desc" = ""Touchpad"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C23_IRQ)" - register "generic.probed" = "1" - register "hid_desc_reg_offset" = "0x20" - device i2c 2c on end - end - end - device pci 15.1 on end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 on # SATA - register "SataSalpSupport" = "0" - register "SataMode" = "0" - - # Port 1 - register "SataPortsEnable[1]" = "1" - register "SataPortsDevSlp[1]" = "0" - - # Port 2 - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[2]" = "0" - end - device pci 19.0 on end # UART #2 - device pci 19.1 off end # I2C #4 - device pci 19.2 off end # I2C #5 - device pci 1c.0 off end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 on # PCI Express Port 6 (WLAN) - register "PcieRpEnable[5]" = "1" - register "PcieRpClkReqSupport[5]" = "1" - register "PcieRpClkReqNumber[5]" = "4" - register "PcieRpClkSrcNumber[5]" = "4" - register "PcieRpLtrEnable[5]" = "1" - chip drivers/wifi/generic - device pci 00.0 on end - end - end - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 on # PCI Express Port 9(SSD x4) - device pci 00.0 on end - register "PcieRpEnable[8]" = "1" - register "PcieRpClkReqSupport[8]" = "1" - register "PcieRpClkReqNumber[8]" = "0" - register "PcieRpClkSrcNumber[8]" = "0" - register "PcieRpLtrEnable[8]" = "1" - smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X" - end - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1e.0 on end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1e.4 off end # eMMC - device pci 1e.5 off end # SDIO - device pci 1e.6 off end # SDCard - device pci 1f.0 on # LPC Interface - # LPC configuration from lspci -s 1f.0 -xxx - # Address 0x84: Decode 0x680 - 0x68F - register "gen1_dec" = "0x000c0681" - # Address 0x88: Decode - register "gen2_dec" = "0x000c1641" - # Address 0x8C: Decode 0x200 - 0x2FF - register "gen3_dec" = "0x00000069" - # Address 0x90: Decode 0x80 - 0x8F (Port 80) - register "gen4_dec" = "0x0000006d" - register "serirq_mode" = "SERIRQ_CONTINUOUS" - - chip ec/starlabs/it8987 - # Port 4Eh/4Fh - device pnp 4e.0 on # IO Interface - end - end - end - device pci 1f.1 off end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - subsystemid 0x10ec 0x111e - device pci 1f.4 on end # SMBus - device pci 1f.5 off end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/starlabs/labtop/variants/kbl/gma-mainboard.ads b/src/mainboard/starlabs/labtop/variants/kbl/gma-mainboard.ads deleted file mode 100644 index 8402b39a94..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/gma-mainboard.ads +++ /dev/null @@ -1,18 +0,0 @@ --- SPDX-License-Identifier: GPL-2.0-or-later - -with HW.GFX.GMA; -with HW.GFX.GMA.Display_Probing; - -use HW.GFX.GMA; -use HW.GFX.GMA.Display_Probing; - -private package GMA.Mainboard is - - ports : constant Port_List := - (DP1, -- USB-C - HDMI1, -- USB-C - HDMI2, -- HDMI - eDP, - others => Disabled); - -end GMA.Mainboard; diff --git a/src/mainboard/starlabs/labtop/variants/kbl/include/variant/gpio.h b/src/mainboard/starlabs/labtop/variants/kbl/include/variant/gpio.h deleted file mode 100644 index 803007d0f0..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/include/variant/gpio.h +++ /dev/null @@ -1,203 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _VARIANT_GPIO_H_ -#define _VARIANT_GPIO_H_ - -#include "baseboard/variants.h" - -#ifndef __ACPI__ - -/* - * All definitions are taken from a comparison of the output of "inteltool -a" - * using the stock BIOS and with coreboot. - */ - -/* Early pad configuration in romstage. */ -static const struct pad_config early_gpio_table[] = { - -}; - -const struct pad_config *variant_early_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(early_gpio_table); - return early_gpio_table; -} - -/* Pad configuration in ramstage. */ -static const struct pad_config gpio_table[] = { - PAD_CFG_NF(GPD0, NONE, PWROK, NF1), - PAD_CFG_NF(GPD1, NONE, PWROK, NF1), - _PAD_CFG_STRUCT(GPD2, 0x04000300, 0x1000), - PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), - PAD_CFG_NF(GPD4, NONE, PWROK, NF1), - PAD_CFG_NF(GPD5, NONE, PWROK, NF1), - PAD_CFG_NF(GPD6, NONE, PWROK, NF1), - _PAD_CFG_STRUCT(GPD7, 0x04000101, 0x1000), - PAD_CFG_NF(GPD8, NONE, PWROK, NF1), - PAD_CFG_GPI(GPD9, DN_20K, PWROK), - PAD_CFG_NF(GPD10, DN_20K, PWROK, NF1), - PAD_CFG_NF(GPD11, DN_20K, PWROK, NF1), - PAD_NC(GPP_A0, NONE), - PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), - PAD_NC(GPP_A7, NONE), - PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), - PAD_NC(GPP_A10, DN_20K), - PAD_CFG_GPI(GPP_A11, DN_20K, DEEP), - PAD_NC(GPP_A12, NONE), - PAD_NC(GPP_A13, DN_20K), - PAD_NC(GPP_A14, DN_20K), - PAD_NC(GPP_A15, DN_20K), - PAD_NC(GPP_A16, DN_20K), - PAD_NC(GPP_A17, DN_20K), - PAD_NC(GPP_A18, DN_20K), - PAD_NC(GPP_A19, DN_20K), - PAD_NC(GPP_A20, DN_20K), - PAD_NC(GPP_A21, DN_20K), - PAD_NC(GPP_A22, DN_20K), - PAD_NC(GPP_A23, DN_20K), - PAD_NC(GPP_B0, DN_20K), - PAD_NC(GPP_B1, DN_20K), - PAD_NC(GPP_B2, DN_20K), - PAD_NC(GPP_B3, DN_20K), - PAD_CFG_TERM_GPO(GPP_B4, 1, UP_20K, DEEP), - PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), - PAD_CFG_GPI(GPP_B6, DN_20K, DEEP), - PAD_CFG_NF(GPP_B7, DN_20K, DEEP, NF1), - PAD_CFG_NF(GPP_B8, DN_20K, DEEP, NF1), - PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_B10, DN_20K, DEEP, NF1), - PAD_NC(GPP_B11, DN_20K), - PAD_NC(GPP_B12, DN_20K), - PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), - PAD_NC(GPP_B14, DN_20K), - PAD_NC(GPP_B15, DN_20K), - PAD_NC(GPP_B16, DN_20K), - PAD_NC(GPP_B17, DN_20K), - PAD_NC(GPP_B18, DN_20K), - PAD_NC(GPP_B19, DN_20K), - PAD_NC(GPP_B20, DN_20K), - PAD_NC(GPP_B21, DN_20K), - PAD_NC(GPP_B22, DN_20K), - PAD_NC(GPP_B23, DN_20K), - PAD_CFG_NF(GPP_C0, UP_20K, DEEP, NF1), - PAD_CFG_NF(GPP_C1, UP_20K, DEEP, NF1), - PAD_NC(GPP_C2, DN_20K), - PAD_NC(GPP_C3, DN_20K), - PAD_NC(GPP_C4, DN_20K), - PAD_NC(GPP_C5, DN_20K), - PAD_NC(GPP_C6, DN_20K), - PAD_NC(GPP_C7, DN_20K), - PAD_CFG_NF(GPP_C8, UP_20K, DEEP, NF1), - PAD_CFG_NF(GPP_C9, UP_20K, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_C10, 0x44000301, 0x3000), - PAD_CFG_NF(GPP_C11, UP_20K, DEEP, NF1), - PAD_NC(GPP_C12, UP_20K), - PAD_NC(GPP_C13, UP_20K), - PAD_NC(GPP_C14, UP_20K), - PAD_NC(GPP_C15, UP_20K), - PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), - PAD_NC(GPP_C22, NONE), - _PAD_CFG_STRUCT(GPP_C23, 0x80100100, 0x3000), - PAD_NC(GPP_D0, DN_20K), - PAD_NC(GPP_D1, DN_20K), - PAD_NC(GPP_D2, DN_20K), - PAD_NC(GPP_D3, DN_20K), - PAD_NC(GPP_D4, DN_20K), - PAD_NC(GPP_D5, DN_20K), - PAD_NC(GPP_D6, DN_20K), - PAD_NC(GPP_D7, DN_20K), - PAD_NC(GPP_D8, DN_20K), - PAD_NC(GPP_D9, DN_20K), - PAD_NC(GPP_D10, DN_20K), - PAD_NC(GPP_D11, DN_20K), - PAD_NC(GPP_D12, DN_20K), - PAD_NC(GPP_D13, DN_20K), - PAD_NC(GPP_D14, DN_20K), - PAD_NC(GPP_D15, DN_20K), - PAD_NC(GPP_D16, DN_20K), - PAD_NC(GPP_D17, DN_20K), - PAD_NC(GPP_D18, DN_20K), - PAD_NC(GPP_D19, DN_20K), - PAD_CFG_TERM_GPO(GPP_D20, 1, UP_20K, DEEP), - PAD_NC(GPP_D21, DN_20K), - PAD_NC(GPP_D22, DN_20K), - PAD_NC(GPP_D23, DN_20K), - PAD_NC(GPP_E0, DN_20K), - PAD_NC(GPP_E1, DN_20K), - _PAD_CFG_STRUCT(GPP_E2, 0x44000601, 0x0000), - PAD_NC(GPP_E3, DN_20K), - PAD_NC(GPP_E4, DN_20K), - PAD_NC(GPP_E5, DN_20K), - PAD_CFG_NF(GPP_E6, NONE, PWROK, NF1), - PAD_NC(GPP_E7, DN_20K), - PAD_NC(GPP_E8, DN_20K), - PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), - PAD_NC(GPP_E12, DN_20K), - PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), - _PAD_CFG_STRUCT(GPP_E15, 0x42840100, 0x0000), - _PAD_CFG_STRUCT(GPP_E16, 0x80880100, 0x0000), - PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), - PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF1), - PAD_NC(GPP_E20, DN_20K), - PAD_NC(GPP_E21, DN_20K), - PAD_NC(GPP_E22, DN_20K), - PAD_NC(GPP_E23, DN_20K), - PAD_NC(GPP_F0, DN_20K), - PAD_NC(GPP_F1, DN_20K), - PAD_NC(GPP_F2, DN_20K), - PAD_NC(GPP_F3, DN_20K), - PAD_NC(GPP_F4, DN_20K), - PAD_NC(GPP_F5, DN_20K), - PAD_NC(GPP_F6, DN_20K), - PAD_NC(GPP_F7, DN_20K), - PAD_CFG_NF(GPP_F8, DN_20K, DEEP, NF1), - PAD_CFG_NF(GPP_F9, DN_20K, DEEP, NF1), - PAD_NC(GPP_F10, DN_20K), - PAD_NC(GPP_F11, DN_20K), - PAD_NC(GPP_F12, DN_20K), - PAD_NC(GPP_F13, DN_20K), - PAD_NC(GPP_F14, DN_20K), - PAD_NC(GPP_F15, DN_20K), - PAD_NC(GPP_F16, DN_20K), - PAD_NC(GPP_F17, DN_20K), - PAD_NC(GPP_F18, DN_20K), - PAD_NC(GPP_F19, DN_20K), - PAD_NC(GPP_F20, DN_20K), - PAD_NC(GPP_F21, DN_20K), - PAD_NC(GPP_F22, DN_20K), - PAD_NC(GPP_F23, DN_20K), - PAD_CFG_GPI(GPP_G0, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G1, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G2, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G3, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G4, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G5, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G6, DN_20K, DEEP), - PAD_CFG_GPI(GPP_G7, DN_20K, DEEP), - -}; - -const struct pad_config *variant_gpio_table(size_t *num) -{ - *num = ARRAY_SIZE(gpio_table); - return gpio_table; -} - -#endif - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/kbl/include/variant/hda_verb.h b/src/mainboard/starlabs/labtop/variants/kbl/include/variant/hda_verb.h deleted file mode 100644 index 2ad909624c..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/include/variant/hda_verb.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _HDA_VERB_H_ -#define _HDA_VERB_H_ - -#include <device/azalia_device.h> -#include <device/azalia.h> - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x10ec0269, // Codec Vendor / Device ID: Realtek ALC269 - 0xffffffff, // Subsystem ID - 0x0000002b, // Number of jacks (NID entries) - /* Rest Codec First */ - AZALIA_RESET(0x1), - /* HDA Codec Subsystem ID Verb-table - HDA Codec Subsystem ID : 0x10EC111E */ - 0x0017201E, - 0x00172111, - 0x001722EC, - 0x00172310, - /* Pin Widget Verb-table */ - AZALIA_PIN_CFG(0, 0x01, 0x00000000), - AZALIA_PIN_CFG(0, 0x12, 0x90a61120), - AZALIA_PIN_CFG(0, 0x14, 0x90171110), - AZALIA_PIN_CFG(0, 0x15, 0x042B1010), - AZALIA_PIN_CFG(0, 0x17, 0x411111F0), - AZALIA_PIN_CFG(0, 0x18, 0x04AB1020), - AZALIA_PIN_CFG(0, 0x19, 0x411111F0), - AZALIA_PIN_CFG(0, 0x1A, 0x411111F0), - AZALIA_PIN_CFG(0, 0x1B, 0x411111F0), - AZALIA_PIN_CFG(0, 0x1D, 0x411111F0), - AZALIA_PIN_CFG(0, 0x1E, 0x411111F0), - /* Widget node 0x20 */ - 0x02050018, - 0x02040184, /* Stock: 0x02043984 */ - 0x0205001C, - 0x02040800, - /* Widget node 0x20 - 1 */ - 0x02050024, - 0x02040000, - 0x02050004, - 0x02040080, - /* Widget node 0x20 - 2 */ - 0x02050008, - 0x02040300, - 0x0205000C, - 0x02043F00, - /* Widget node 0x20 - 3 */ - 0x02050015, - 0x02048002, - 0x02050015, - 0x02048002, - /* Widget node 0x0C */ - 0x00C37080, - 0x00270610, - 0x00D37080, - 0x00370610, - - 0x8086280b, /* Codec Vendor / Device ID: Intel */ - 0x80860101, /* Subsystem ID */ - 0x00000004, /* Number of 4 dword sets */ - - AZALIA_SUBVENDOR(2, 0x80860101), - - AZALIA_PIN_CFG(2, 0x05, 0x18560010), - AZALIA_PIN_CFG(2, 0x06, 0x18560010), - AZALIA_PIN_CFG(2, 0x07, 0x18560010), - -}; - -const u32 pc_beep_verbs[] = { -}; - -AZALIA_ARRAY_SIZES; - -#endif diff --git a/src/mainboard/starlabs/labtop/variants/kbl/romstage.c b/src/mainboard/starlabs/labtop/variants/kbl/romstage.c deleted file mode 100644 index 4f1b7e05d5..0000000000 --- a/src/mainboard/starlabs/labtop/variants/kbl/romstage.c +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include <assert.h> -#include <console/console.h> -#include <soc/romstage.h> -#include <spd_bin.h> -#include "spd/spd_util.c" -#include "spd/spd.h" -#include <ec/acpi/ec.h> -#include <stdint.h> - -void mainboard_memory_init_params(FSPM_UPD *mupd) -{ - FSP_M_CONFIG *mem_cfg; - mem_cfg = &mupd->FspmConfig; - - /* Use the correct entry in the SPD table defined in Makefile.inc */ - u8 spd_index = 6; - printk(BIOS_INFO, "SPD index %d\n", spd_index); - - mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0); - mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0); - mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor); - mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget); - - mem_cfg->DqPinsInterleaved = 0; - mem_cfg->MemorySpdDataLen = CONFIG_DIMM_SPD_SIZE; - /* Memory leak is ok since we have memory mapped boot media */ - // TODO evaluate google/eve way of loading - mem_cfg->MemorySpdPtr00 = spd_cbfs_map(spd_index); - if (!mem_cfg->MemorySpdPtr00) - die("spd.bin not found\n"); - mem_cfg->MemorySpdPtr10 = mem_cfg->MemorySpdPtr00; - - mupd->FspmTestConfig.DmiVc1 = 1; -} |