diff options
Diffstat (limited to 'src/mainboard')
-rw-r--r-- | src/mainboard/google/cyan/romstage.c | 17 | ||||
-rw-r--r-- | src/mainboard/google/cyan/spd/spd.c | 64 | ||||
-rw-r--r-- | src/mainboard/google/cyan/spd/spd_util.h | 3 |
3 files changed, 44 insertions, 40 deletions
diff --git a/src/mainboard/google/cyan/romstage.c b/src/mainboard/google/cyan/romstage.c index 5470b9c465..c877e42055 100644 --- a/src/mainboard/google/cyan/romstage.c +++ b/src/mainboard/google/cyan/romstage.c @@ -17,13 +17,11 @@ #include <soc/romstage.h> #include <baseboard/variants.h> +#include "spd/spd_util.h" + /* All FSP specific code goes in this block */ void mainboard_romstage_entry(struct romstage_params *rp) { - struct pei_data *ps = rp->pei_data; - - mainboard_fill_spd_data(ps); - /* Call back into chipset code with platform values updated. */ romstage_common(rp); } @@ -31,16 +29,7 @@ void mainboard_romstage_entry(struct romstage_params *rp) void mainboard_memory_init_params(struct romstage_params *params, MEMORY_INIT_UPD *memory_params) { - /* Update SPD data */ - if (CONFIG(BOARD_GOOGLE_CYAN)) { - memory_params->PcdMemoryTypeEnable = MEM_DDR3; - memory_params->PcdMemorySpdPtr = - (u32)params->pei_data->spd_data_ch0; - } else - memory_params->PcdMemoryTypeEnable = MEM_LPDDR3; - - memory_params->PcdMemChannel0Config = params->pei_data->spd_ch0_config; - memory_params->PcdMemChannel1Config = params->pei_data->spd_ch1_config; + spd_memory_init_params(memory_params); /* Variant-specific memory params */ variant_memory_init_params(memory_params); diff --git a/src/mainboard/google/cyan/spd/spd.c b/src/mainboard/google/cyan/spd/spd.c index af694a4339..7c66e947fc 100644 --- a/src/mainboard/google/cyan/spd/spd.c +++ b/src/mainboard/google/cyan/spd/spd.c @@ -40,11 +40,24 @@ __weak uint8_t get_ramid(void) return gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios)); } -static void *get_spd_pointer(char *spd_file_content, int total_spds, int *dual) +static void *get_spd_pointer(int *dual) { + char *spd_file; + size_t spd_file_len; + int total_spds; int ram_id = 0; int spd_index = 0; + /* Find the SPD data in CBFS. */ + spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, + &spd_file_len); + if (!spd_file) + die("SPD data not found."); + + if (spd_file_len < SPD_PAGE_LEN) + die("Missing SPD data."); + total_spds = spd_file_len / SPD_PAGE_LEN; + ram_id = get_ramid(); printk(BIOS_DEBUG, "ram_id=%d, total_spds: %d\n", ram_id, total_spds); @@ -54,33 +67,20 @@ static void *get_spd_pointer(char *spd_file_content, int total_spds, int *dual) return NULL; } /* Return the serial product data for the RAM */ - return &spd_file_content[SPD_PAGE_LEN * spd_index]; + return &spd_file[SPD_PAGE_LEN * spd_index]; } /* Copy SPD data for on-board memory */ -void mainboard_fill_spd_data(struct pei_data *ps) +void spd_memory_init_params(MEMORY_INIT_UPD *memory_params) { - char *spd_file; - size_t spd_file_len; void *spd_content; int dual_channel = 0; - /* Find the SPD data in CBFS. */ - spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, - &spd_file_len); - if (!spd_file) - die("SPD data not found."); - - if (spd_file_len < SPD_PAGE_LEN) - die("Missing SPD data."); - /* * Both channels are always present in SPD data. Always use matched * DIMMs so use the same SPD data for each DIMM. */ - spd_content = get_spd_pointer(spd_file, - spd_file_len / SPD_PAGE_LEN, - &dual_channel); + spd_content = get_spd_pointer(&dual_channel); if (CONFIG(DISPLAY_SPD_DATA) && spd_content != NULL) { printk(BIOS_DEBUG, "SPD Data:\n"); hexdump(spd_content, SPD_PAGE_LEN); @@ -94,21 +94,27 @@ void mainboard_fill_spd_data(struct pei_data *ps) * 2=DimmDisabled */ if (spd_content != NULL) { - ps->spd_data_ch0 = spd_content; - ps->spd_ch0_config = 1; + memory_params->PcdMemChannel0Config = 1; printk(BIOS_DEBUG, "Channel 0 DIMM soldered down\n"); if (dual_channel) { printk(BIOS_DEBUG, "Channel 1 DIMM soldered down\n"); - ps->spd_data_ch1 = spd_content; - ps->spd_ch1_config = 1; + memory_params->PcdMemChannel1Config = 1; } else { printk(BIOS_DEBUG, "Channel 1 DIMM not installed\n"); - ps->spd_ch1_config = 2; + memory_params->PcdMemChannel1Config = 2; } } + + /* Update SPD data */ + if (CONFIG(BOARD_GOOGLE_CYAN)) { + memory_params->PcdMemoryTypeEnable = MEM_DDR3; + memory_params->PcdMemorySpdPtr = (uintptr_t)spd_content; + } else { + memory_params->PcdMemoryTypeEnable = MEM_LPDDR3; + } } -static void set_dimm_info(uint8_t *spd, struct dimm_info *dimm) +static void set_dimm_info(const uint8_t *spd, struct dimm_info *dimm) { const int spd_capmb[8] = { 1, 2, 4, 8, 16, 32, 64, 0 }; const int spd_ranks[8] = { 1, 2, 3, 4, -1, -1, -1, -1 }; @@ -171,9 +177,15 @@ static void set_dimm_info(uint8_t *spd, struct dimm_info *dimm) void mainboard_save_dimm_info(struct romstage_params *params) { + const void *spd_content; + int dual_channel; struct dimm_info *dimm; struct memory_info *mem_info; + spd_content = get_spd_pointer(&dual_channel); + if (spd_content == NULL) + return; + /* * Allocate CBMEM area for DIMM information used to populate SMBIOS * table 17 @@ -186,13 +198,13 @@ void mainboard_save_dimm_info(struct romstage_params *params) /* Describe the first channel memory */ dimm = &mem_info->dimm[0]; - set_dimm_info(params->pei_data->spd_data_ch0, dimm); + set_dimm_info(spd_content, dimm); mem_info->dimm_cnt = 1; /* Describe the second channel memory */ - if (params->pei_data->spd_ch1_config == 1) { + if (dual_channel) { dimm = &mem_info->dimm[1]; - set_dimm_info(params->pei_data->spd_data_ch1, dimm); + set_dimm_info(spd_content, dimm); dimm->channel_num = 1; mem_info->dimm_cnt = 2; } diff --git a/src/mainboard/google/cyan/spd/spd_util.h b/src/mainboard/google/cyan/spd/spd_util.h index 11d6eaa16d..0c5b3265ef 100644 --- a/src/mainboard/google/cyan/spd/spd_util.h +++ b/src/mainboard/google/cyan/spd/spd_util.h @@ -16,7 +16,10 @@ #ifndef SPD_UTIL_H #define SPD_UTIL_H +#include <fsp/soc_binding.h> + uint8_t get_ramid(void); int get_variant_spd_index(int ram_id, int *dual); +void spd_memory_init_params(MEMORY_INIT_UPD *memory_params); #endif /* SPD_UTIL_H */ |