diff options
Diffstat (limited to 'src/mainboard')
20 files changed, 2176 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index cd45164fc7..1f3b3d5b53 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -73,6 +73,15 @@ config BOARD_GOOGLE_BASEBOARD_NISSA select TPM_GOOGLE_TI50 select SOC_INTEL_COMMON_MMC_OVERRIDE +config BOARD_GOOGLE_BASEBOARD_SKOLAS + def_bool n + select BOARD_GOOGLE_BRYA_COMMON + select HAVE_SLP_S0_GATE + select MEMORY_SOLDERDOWN if !BOARD_GOOGLE_BANSHEE + select SOC_INTEL_ALDERLAKE_PCH_P + select SYSTEM_TYPE_LAPTOP + select TPM_GOOGLE_CR50 + if BOARD_GOOGLE_BRYA_COMMON config BASEBOARD_DIR @@ -80,6 +89,7 @@ config BASEBOARD_DIR default "brya" if BOARD_GOOGLE_BASEBOARD_BRYA default "brask" if BOARD_GOOGLE_BASEBOARD_BRASK default "nissa" if BOARD_GOOGLE_BASEBOARD_NISSA + default "skolas" if BOARD_GOOGLE_BASEBOARD_SKOLAS config CHROMEOS select EC_GOOGLE_CHROMEEC_SWITCHES @@ -127,6 +137,7 @@ config DRIVER_TPM_I2C_BUS default 0x1 if BOARD_GOOGLE_OSIRIS default 0x1 if BOARD_GOOGLE_MITHRAX default 0x1 if BOARD_GOOGLE_KULDAX + default 0x3 if BOARD_GOOGLE_SKOLAS4ES config DRIVER_TPM_I2C_ADDR hex @@ -153,6 +164,7 @@ config MAINBOARD_FAMILY default "Google_Brya" if BOARD_GOOGLE_BASEBOARD_BRYA default "Google_Brask" if BOARD_GOOGLE_BASEBOARD_BRASK default "Google_Nissa" if BOARD_GOOGLE_BASEBOARD_NISSA + default "Google_Skolas" if BOARD_GOOGLE_BASEBOARD_SKOLAS config MAINBOARD_PART_NUMBER default "Brya" if BOARD_GOOGLE_BRYA0 @@ -184,6 +196,7 @@ config MAINBOARD_PART_NUMBER default "Osiris" if BOARD_GOOGLE_OSIRIS default "Mithrax" if BOARD_GOOGLE_MITHRAX default "Kuldax" if BOARD_GOOGLE_KULDAX + default "Skolas4ES" if BOARD_GOOGLE_SKOLAS4ES config VARIANT_DIR default "brya0" if BOARD_GOOGLE_BRYA0 @@ -215,6 +228,7 @@ config VARIANT_DIR default "osiris" if BOARD_GOOGLE_OSIRIS default "mithrax" if BOARD_GOOGLE_MITHRAX default "kuldax" if BOARD_GOOGLE_KULDAX + default "skolas4es" if BOARD_GOOGLE_SKOLAS4ES config VBOOT select VBOOT_EARLY_EC_SYNC if !BOARD_GOOGLE_BASEBOARD_NISSA @@ -245,7 +259,7 @@ config USE_PM_ACPI_TIMER choice prompt "Cache as RAM (CAR) setup configuration to use" - default USE_ADL_NEM if BOARD_GOOGLE_BRYA4ES || BOARD_GOOGLE_PRIMUS4ES || BOARD_GOOGLE_GIMBLE4ES || BOARD_GOOGLE_REDRIX4ES || BOARD_GOOGLE_TAEKO4ES || BOARD_GOOGLE_ANAHERA4ES || BOARD_GOOGLE_TANIKS || BOARD_GOOGLE_NIVVIKS || BOARD_GOOGLE_NEREID || BOARD_GOOGLE_CRAASK + default USE_ADL_NEM if BOARD_GOOGLE_BRYA4ES || BOARD_GOOGLE_PRIMUS4ES || BOARD_GOOGLE_GIMBLE4ES || BOARD_GOOGLE_REDRIX4ES || BOARD_GOOGLE_TAEKO4ES || BOARD_GOOGLE_ANAHERA4ES || BOARD_GOOGLE_TANIKS || BOARD_GOOGLE_NIVVIKS || BOARD_GOOGLE_NEREID || BOARD_GOOGLE_CRAASK || BOARD_GOOGLE_SKOLAS4ES default USE_ADL_ENEM config USE_ADL_ENEM diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index 62aa03878d..70ee5a84dd 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -138,6 +138,13 @@ config BOARD_GOOGLE_REDRIX4ES select EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG select SOC_INTEL_COMMON_BLOCK_IPU +config BOARD_GOOGLE_SKOLAS4ES + bool "-> Skolas4ES" + select BOARD_GOOGLE_BASEBOARD_SKOLAS + select DRIVERS_GENESYSLOGIC_GL9755 + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU + config BOARD_GOOGLE_TAEKO bool "-> Taeko" select BOARD_GOOGLE_BASEBOARD_BRYA diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/Makefile.inc b/src/mainboard/google/brya/variants/baseboard/skolas/Makefile.inc new file mode 100644 index 0000000000..8a4b2acfaa --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/Makefile.inc @@ -0,0 +1,7 @@ +bootblock-y += gpio.c + +romstage-y += memory.c +romstage-y += gpio.c + +ramstage-y += gpio.c +ramstage-y += ramstage.c diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/devicetree.cb b/src/mainboard/google/brya/variants/baseboard/skolas/devicetree.cb new file mode 100644 index 0000000000..f2276d0447 --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/devicetree.cb @@ -0,0 +1,175 @@ +chip soc/intel/alderlake + + # GPE configuration + register "pmc_gpe0_dw0" = "GPP_A" + register "pmc_gpe0_dw1" = "GPP_E" + register "pmc_gpe0_dw2" = "GPP_F" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # S0ix enable + register "s0ix_enable" = "1" + + # DPTF enable + register "dptf_enable" = "1" + + register "tcc_offset" = "10" # TCC of 90 + + # Enable CNVi BT + register "cnvi_bt_core" = "true" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # USB2_C1 + register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)" # USB2_C2 + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + + register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC0)" + register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC1)" + register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC2)" + + register "serial_io_i2c_mode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "serial_io_gspi_mode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + }" + + register "serial_io_uart_mode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoPci, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + register "pch_slp_s3_min_assertion_width" = "SLP_S3_ASSERTION_50_MS" + register "pch_slp_s4_min_assertion_width" = "SLP_S4_ASSERTION_1S" + register "pch_slp_sus_min_assertion_width" = "SLP_SUS_ASSERTION_1_S" + register "pch_slp_a_min_assertion_width" = "SLP_A_ASSERTION_98_MS" + register "pch_reset_power_cycle_duration" = "POWER_CYCLE_DURATION_1S" + + # HD Audio + register "pch_hda_dsp_enable" = "1" + register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T" + register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ" + register "pch_hda_idisp_codec_enable" = "1" + + # FIVR RFI Spread Spectrum 1.5% + register "fivr_spread_spectrum" = "FIVR_SS_1_5" + + # Disable C state auto-demotion for all brya baseboards + register "disable_c1_state_auto_demotion" = "1" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio and WFC | + #| I2C1 | Touchscreen | + #| I2C2 | SAR0 | + #| I2C3 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 900, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[3] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + }" + + # set EPP to 45%: 45 * 256/100 = 115 = 0x73 + register "enable_energy_perf_pref" = "true" + register "energy_perf_pref_value" = "0x73" + + device domain 0 on + device ref igpu on end + device ref dtt on end + device ref tbt_pcie_rp0 on end + device ref tbt_pcie_rp1 on end + device ref tbt_pcie_rp2 on end + device ref tcss_xhci on end + device ref tcss_dma0 on end + device ref tcss_dma1 on end + device ref xhci on end + device ref shared_sram on end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + register "is_untrusted" = "true" + device generic 0 on end + end + end + device ref i2c3 on end + device ref heci1 on end + device ref sata on end + device ref pcie_rp8 on + # Enable SD Card PCIE 8 using clk 3 + register "pch_pcie_rp[PCH_RP(8)]" = "{ + .clk_src = 3, + .clk_req = 3, + .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER, + }" + end #PCIE8 SD card + device ref pcie_rp9 on + # Enable NVMe PCIE 9 using clk 1 + register "pch_pcie_rp[PCH_RP(9)]" = "{ + .clk_src = 1, + .clk_req = 1, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end #PCIE9-12 SSD + device ref uart0 on end + device ref gspi1 on end + device ref pch_espi on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end + device ref hda on end + end +end diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/gpio.c b/src/mainboard/google/brya/variants/baseboard/skolas/gpio.c new file mode 100644 index 0000000000..fb7bc21d2d --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/gpio.c @@ -0,0 +1,454 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <types.h> +#include <soc/gpio.h> +#include <vendorcode/google/chromeos/chromeos.h> + +/* Pad configuration in ramstage */ +static const struct pad_config gpio_table[] = { + /* A0 thru A5, A9 and A10 come configured out of reset, do not touch */ + /* A0 : ESPI_IO0 ==> ESPI_IO_0 */ + /* A1 : ESPI_IO1 ==> ESPI_IO_1 */ + /* A2 : ESPI_IO2 ==> ESPI_IO_2 */ + /* A3 : ESPI_IO3 ==> ESPI_IO_3 */ + /* A4 : ESPI_CS# ==> ESPI_CS_L */ + /* A5 : ESPI_ALERT0# ==> NC */ + PAD_NC(GPP_A5, NONE), + /* A6 : ESPI_ALERT1# ==> SPKR_INT_L */ + PAD_CFG_GPI(GPP_A6, NONE, DEEP), + /* A7 : SRCCLK_OE7# ==> WWAN_PCIE_WAKE_ODL */ + PAD_CFG_GPI_APIC(GPP_A7, NONE, PLTRST, LEVEL, INVERT), + /* A8 : SRCCLKREQ7# ==> WWAN_RF_DISABLE_ODL */ + PAD_CFG_GPO(GPP_A8, 1, DEEP), + /* A9 : ESPI_CLK ==> ESPI_CLK */ + /* A10 : ESPI_RESET# ==> ESPI_PCH_RST_EC_L */ + /* A11 : PMC_I2C_SDA ==> EN_SPKR_PA */ + PAD_CFG_GPO(GPP_A11, 1, DEEP), + /* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_LOCK(GPP_A13, NONE, LEVEL, INVERT, LOCK_CONFIG), + /* A14 : USB_OC1# ==> USB_C1_OC_ODL */ + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), + /* A15 : USB_OC2# ==> USB_C2_OC_ODL */ + PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1), + /* A16 : USB_OC3# ==> USB_A0_OC_ODL */ + PAD_CFG_NF_LOCK(GPP_A16, NONE, NF1, LOCK_CONFIG), + /* A17 : DISP_MISCC ==> EN_FCAM_PWR */ + PAD_CFG_GPO(GPP_A17, 1, DEEP), + /* A18 : DDSP_HPDB ==> HDMI_HPD */ + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + /* A19 : DDSP_HPD1 ==> USB_C2_AUX_DC_P */ + PAD_CFG_NF(GPP_A19, NONE, DEEP, NF6), + /* A20 : DDSP_HPD2 ==> USB_C2_AUX_DC_N */ + PAD_CFG_NF(GPP_A20, NONE, DEEP, NF6), + /* A21 : DDPC_CTRCLK ==> USB_C1_AUX_DC_P */ + PAD_CFG_NF(GPP_A21, NONE, DEEP, NF6), + /* A22 : DDPC_CTRLDATA ==> USB_C1_AUX_DC_N */ + PAD_CFG_NF(GPP_A22, NONE, DEEP, NF6), + /* A23 : ESPI_CS1# ==> AUD_HP_INT_L */ + PAD_CFG_GPI_INT(GPP_A23, NONE, PLTRST, EDGE_BOTH), + + /* B0 : SOC_VID0 */ + PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), + /* B1 : SOC_VID1 */ + PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), + /* B2 : VRALERT# ==> M2_SSD_PLA_L */ + PAD_CFG_GPO_LOCK(GPP_B2, 1, LOCK_CONFIG), + /* B3 : PROC_GP2 ==> SAR2_INT_L */ + PAD_CFG_GPI_APIC_LOCK(GPP_B3, NONE, LEVEL, NONE, LOCK_CONFIG), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO_LOCK(GPP_B4, 1, LOCK_CONFIG), + /* B5 : ISH_I2C0_SDA ==> PCH_I2C_MISC_SDA */ + PAD_CFG_NF_LOCK(GPP_B5, NONE, NF2, LOCK_CONFIG), + /* B6 : ISH_I2C0_SCL ==> PCH_I2C_MISC_SCL */ + PAD_CFG_NF_LOCK(GPP_B6, NONE, NF2, LOCK_CONFIG), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF_LOCK(GPP_B7, NONE, NF2, LOCK_CONFIG), + /* B8 : ISH_I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF_LOCK(GPP_B8, NONE, NF2, LOCK_CONFIG), + /* B9 : NC */ + PAD_NC(GPP_B9, NONE), + /* B10 : NC */ + PAD_NC(GPP_B10, NONE), + /* B11 : PMCALERT# ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_B11, 1, DEEP), + /* B12 : SLP_S0# ==> SLP_S0_L */ + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + /* B13 : PLTRST# ==> PLT_RST_L */ + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + /* B14 : SPKR ==> GPP_B14_STRAP */ + PAD_NC_LOCK(GPP_B14, NONE, LOCK_CONFIG), + /* B15 : TIME_SYNC0 ==> FP_USER_PRES_FP_L */ + PAD_CFG_GPI_LOCK(GPP_B15, NONE, LOCK_CONFIG), + /* B16 : I2C5_SDA ==> PCH_I2C_TCHPAD_SDA */ + PAD_CFG_NF_LOCK(GPP_B16, NONE, NF2, LOCK_CONFIG), + /* B17 : I2C5_SCL ==> PCH_I2C_TCHPAD_SCL */ + PAD_CFG_NF_LOCK(GPP_B17, NONE, NF2, LOCK_CONFIG), + /* B18 : ADR_COMPLETE ==> GPP_B18_STRAP */ + PAD_NC(GPP_B18, NONE), + /* B19 : NC */ + PAD_NC(GPP_B19, NONE), + /* B20 : NC */ + PAD_NC(GPP_B20, NONE), + /* B21 : NC */ + PAD_NC(GPP_B21, NONE), + /* B22 : NC */ + PAD_NC(GPP_B22, NONE), + /* B23 : SML1ALERT# ==> PCHHOT_ODL_STRAP */ + PAD_NC(GPP_B23, NONE), + + /* C0 : SMBCLK ==> EN_PP3300_TCHSCR */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + /* C1 : SMBDATA ==> USI_RST_L */ + PAD_CFG_GPO(GPP_C1, 0, DEEP), + /* C2 : SMBALERT# ==> GPP_C2_STRAP */ + PAD_NC(GPP_C2, NONE), + /* C3 : SML0CLK ==> EN_UCAM_PWR */ + PAD_CFG_GPO(GPP_C3, 0, DEEP), + /* C4 : SML0DATA ==> EN_UCAM_SENR_PWR */ + PAD_CFG_GPO(GPP_C4, 0, DEEP), + /* C5 : SML0ALERT# ==> GPP_C5_BOOT_STRAP0 */ + PAD_NC(GPP_C5, NONE), + /* C6 : SML1CLK ==> USI_REPORT_EN */ + PAD_CFG_GPO(GPP_C6, 0, DEEP), + /* C7 : SML1DATA ==> USI_INT */ + PAD_CFG_GPI_APIC(GPP_C7, NONE, PLTRST, LEVEL, NONE), + + /* D0 : ISH_GP0 ==> PCH_FP_BOOT0 */ + PAD_CFG_GPO_LOCK(GPP_D0, 0, LOCK_CONFIG), + /* D1 : ISH_GP1 ==> FP_RST_ODL */ + PAD_CFG_GPO_LOCK(GPP_D1, 1, LOCK_CONFIG), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO_LOCK(GPP_D2, 1, LOCK_CONFIG), + /* D3 : ISH_GP3 ==> WCAM_RST_L */ + PAD_CFG_GPO_LOCK(GPP_D3, 0, LOCK_CONFIG), + /* D4 : IMGCLKOUT0 ==> BT_DISABLE_L */ + PAD_CFG_GPO(GPP_D4, 1, DEEP), + /* D5 : SRCCLKREQ0# ==> WWAN_DPR_SAR_ODL */ + PAD_CFG_GPO(GPP_D5, 1, DEEP), + /* D6 : SRCCLKREQ1# ==> SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + /* D7 : SRCCLKREQ2# ==> WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), + /* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + /* D9 : ISH_SPI_CS# ==> USB_C2_LSX_TX */ + PAD_CFG_NF_LOCK(GPP_D9, NONE, NF4, LOCK_CONFIG), + /* D10 : ISH_SPI_CLK ==> USB_C2_LSX_RX_STRAP */ + PAD_CFG_NF_LOCK(GPP_D10, NONE, NF4, LOCK_CONFIG), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO_LOCK(GPP_D11, 1, LOCK_CONFIG), + /* D12 : ISH_SPI_MOSI ==> GPP_D12_STRAP */ + PAD_NC_LOCK(GPP_D12, NONE, LOCK_CONFIG), + /* D13 : ISH_UART0_RXD ==> CAM_PSW_L */ + PAD_CFG_GPI_INT_LOCK(GPP_D13, NONE, EDGE_BOTH, LOCK_CONFIG), + /* D14 : ISH_UART0_TXD ==> SPKR_INT_L */ + PAD_CFG_GPI_LOCK(GPP_D14, NONE, LOCK_CONFIG), + /* D15 : ISH_UART0_RTS# ==> EN_WCAM_SENR_PWR */ + PAD_CFG_GPO_LOCK(GPP_D15, 0, LOCK_CONFIG), + /* D16 : ISH_UART0_CTS# ==> EN_WCAM_PWR */ + PAD_CFG_GPO_LOCK(GPP_D16, 0, LOCK_CONFIG), + /* D17 : UART1_RXD ==> SD_PE_PRSNT_L */ + PAD_CFG_GPI_LOCK(GPP_D17, NONE, LOCK_CONFIG), + /* D18 : UART1_TXD ==> SD_PE_RST_L */ + PAD_CFG_GPO_LOCK(GPP_D18, 1, LOCK_CONFIG), + /* D19 : I2S_MCLK1_OUT ==> I2S_MCLK_R */ + PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), + + /* E0 : see end of E group */ + /* E1 : THC0_SPI1_IO2 ==> MEM_STRAP_2 */ + PAD_CFG_GPI_LOCK(GPP_E1, NONE, LOCK_CONFIG), + /* E2 : THC0_SPI1_IO3 ==> MEM_STRAP_1 */ + PAD_CFG_GPI_LOCK(GPP_E2, NONE, LOCK_CONFIG), + /* E3 : PROC_GP0 ==> HPS_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE(GPP_E3, NONE, PLTRST, LEVEL, NONE), + /* E4 : SATA_DEVSLP0 ==> USB4_BB_RT_FORCE_PWR */ + PAD_CFG_GPO(GPP_E4, 0, DEEP), + /* E5 : SATA_DEVSLP1 ==> USB_A0_RT_RST_ODL */ + PAD_CFG_GPO(GPP_E5, 1, DEEP), + /* E6 : THC0_SPI1_RST# ==> GPPE6_STRAP */ + PAD_NC_LOCK(GPP_E6, NONE, LOCK_CONFIG), + /* E7 : PROC_GP1 ==> EN_HPS_PWR */ + PAD_CFG_GPO(GPP_E7, 1, DEEP), + /* E8 : SLP_DRAM# ==> WIFI_DISABLE_L */ + PAD_CFG_GPO(GPP_E8, 1, DEEP), + /* E9 : USB_OC0# ==> USB_C0_OC_ODL */ + PAD_CFG_NF_LOCK(GPP_E9, NONE, NF1, LOCK_CONFIG), + /* E10 : THC0_SPI1_CS# ==> WWAN_CONFIG0 */ + PAD_CFG_GPI_LOCK(GPP_E10, NONE, LOCK_CONFIG), + /* E11 : THC0_SPI1_CLK ==> MEM_STRAP_0 */ + PAD_CFG_GPI_LOCK(GPP_E11, NONE, LOCK_CONFIG), + /* E12 : THC0_SPI1_IO1 ==> MEM_STRAP_3 */ + PAD_CFG_GPI_LOCK(GPP_E12, NONE, LOCK_CONFIG), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI_LOCK(GPP_E13, NONE, LOCK_CONFIG), + /* E14 : DDSP_HPDA ==> SOC_EDP_HPD */ + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_E15, NONE, LOCK_CONFIG), + /* E16 : RSVD_TP ==> WWAN_RST_L */ + PAD_CFG_GPO(GPP_E16, 1, DEEP), + /* E17 : THC0_SPI1_INT# ==> WWAN_CONFIG3 */ + PAD_CFG_GPI_LOCK(GPP_E17, NONE, LOCK_CONFIG), + /* E18 : DDP1_CTRLCLK ==> USB_C0_LSX_SOC_TX */ + PAD_CFG_NF(GPP_E18, NONE, DEEP, NF4), + /* E19 : DDP1_CTRLDATA ==> USB0_C0_LSX_SOC_RX_STRAP */ + PAD_CFG_NF(GPP_E19, NONE, DEEP, NF4), + /* E20 : DDP2_CTRLCLK ==> USB_C1_LSX_SOC_TX */ + PAD_CFG_NF(GPP_E20, NONE, DEEP, NF4), + /* E21 : DDP2_CTRLDATA ==> USB_C1_LSX_SOC_RX_STRAP */ + PAD_CFG_NF(GPP_E21, NONE, DEEP, NF4), + /* E22 : DDPA_CTRLCLK ==> USB_C0_AUX_DC_P */ + PAD_CFG_NF(GPP_E22, NONE, DEEP, NF6), + /* E23 : DDPA_CTRLDATA ==> USB_C0_AUX_DC_N */ + PAD_CFG_NF(GPP_E23, NONE, DEEP, NF6), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L + NB. Driven high here so that it is sequenced after WWAN_RST_L; a + PERST# signal would normally be reset by PLRST#, but here it will be + explicitly programmed during a power-down sequence. */ + PAD_CFG_GPO(GPP_E0, 1, DEEP), + + /* F0 : CNV_BRI_DT ==> CNV_BRI_DT_STRAP */ + PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), + /* F1 : CNV_BRI_RSP ==> CNV_BRI_RSP */ + PAD_CFG_NF(GPP_F1, UP_20K, DEEP, NF1), + /* F2 : CNV_RGI_DT ==> CNV_RGI_DT_STRAP */ + PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1), + /* F3 : CNV_RGI_RSP ==> CNV_RGI_RSP */ + PAD_CFG_NF(GPP_F3, UP_20K, DEEP, NF1), + /* F4 : CNV_RF_RESET# ==> CNV_RF_RST_L */ + PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1), + /* F5 : MODEM_CLKREQ ==> CNV_CLKREQ0 */ + PAD_CFG_NF(GPP_F5, NONE, DEEP, NF3), + /* F6 : CNV_PA_BLANKING ==> WWAN_WLAN_COEX3 */ + PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), + /* F7 : GPPF7_STRAP */ + PAD_NC(GPP_F7, NONE), + /* F8 : NC */ + PAD_NC(GPP_F8, NONE), + /* F9 : BOOTMPC ==> SLP_S0_GATE_R */ + PAD_CFG_GPO(GPP_F9, 1, PLTRST), + /* F10 : GPPF10_STRAP */ + PAD_NC(GPP_F10, DN_20K), + /* F11 : THC1_SPI2_CLK ==> GSPI_PCH_CLK_FPMCU_R */ + PAD_CFG_NF_LOCK(GPP_F11, NONE, NF4, LOCK_CONFIG), + /* F12 : GSXDOUT ==> GSPI_PCH_DO_FPMCU_DI_R */ + PAD_CFG_NF_LOCK(GPP_F12, NONE, NF4, LOCK_CONFIG), + /* F13 : GSXDOUT ==> GSPI_PCH_DI_FPMCU_DO */ + PAD_CFG_NF_LOCK(GPP_F13, NONE, NF4, LOCK_CONFIG), + /* F14 : GSXDIN ==> TCHPAD_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F14, NONE, LEVEL, INVERT, LOCK_CONFIG), + /* F15 : GSXSRESET# ==> FPMCU_INT_L */ + PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F15, NONE, LEVEL, INVERT, LOCK_CONFIG), + /* F16 : GSXCLK ==> GSPI_PCH_CS_FPMCU_R_L */ + PAD_CFG_NF_LOCK(GPP_F16, NONE, NF4, LOCK_CONFIG), + /* F17 : THC1_SPI2_RST# ==> EC_PCH_INT_ODL */ + PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F17, NONE, LEVEL, INVERT, LOCK_CONFIG), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI_LOCK(GPP_F18, NONE, LOCK_CONFIG), + /* F19 : SRCCLKREQ6# ==> M2_SSD_PLN_L */ + PAD_CFG_GPO(GPP_F19, 1, PLTRST), + /* F20 : EXT_PWR_GATE# ==> UCAM_RST_L */ + PAD_CFG_GPO(GPP_F20, 0, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L */ + PAD_CFG_GPO(GPP_F21, 1, DEEP), + /* F22 : NC */ + PAD_NC(GPP_F22, NONE), + /* F23 : NC */ + PAD_NC(GPP_F23, NONE), + + /* H0 : GPPH0_BOOT_STRAP1 */ + PAD_NC(GPP_H0, NONE), + /* H1 : GPPH1_BOOT_STRAP2 */ + PAD_NC(GPP_H1, NONE), + /* H2 : GPPH2_BOOT_STRAP3 */ + PAD_NC(GPP_H2, NONE), + /* H3 : SX_EXIT_HOLDOFF# ==> WLAN_PCIE_WAKE_ODL */ + PAD_CFG_GPI_LOCK(GPP_H3, NONE, LOCK_CONFIG), + /* H4 : I2C0_SDA ==> PCH_I2C_AUD_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5 : I2C0_SCL ==> PCH_I2C_AUD_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H6 : I2C1_SDA ==> PCH_I2C_TCHSCR_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C1_SCL ==> PCH_I2C_TCHSCR_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H8 : I2C4_SDA ==> WWAN_WLAN_COEX1 */ + PAD_CFG_NF(GPP_H8, NONE, DEEP, NF2), + /* H9 : I2C4_SCL ==> WWAN_WLAN_COEX2 */ + PAD_CFG_NF(GPP_H9, NONE, DEEP, NF2), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H12 : I2C7_SDA ==> SD_PE_WAKE_ODL */ + PAD_CFG_GPI_LOCK(GPP_H12, NONE, LOCK_CONFIG), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_NC_LOCK(GPP_H13, UP_20K, LOCK_CONFIG), + /* H14 : NC */ + PAD_NC(GPP_H14, NONE), + /* H15 : DDPB_CTRLCLK ==> DDIB_HDMI_CTRLCLK */ + PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1), + /* H16 : NC */ + PAD_NC(GPP_H16, NONE), + /* H17 : DDPB_CTRLDATA ==> DDIB_HDMI_CTRLDATA */ + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + /* H18 : PROC_C10_GATE# ==> CPU_C10_GATE_L */ + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), + /* H19 : SRCCLKREQ4# ==> SAR1_INT_L */ + PAD_CFG_GPI_APIC(GPP_H19, NONE, PLTRST, LEVEL, NONE), + /* H20 : IMGCLKOUT1 ==> WLAN_PERST_L */ + PAD_CFG_GPO(GPP_H20, 1, DEEP), + /* H21 : IMGCLKOUT2 ==> UCAM_MCLK */ + PAD_CFG_GPO(GPP_H21, 0, DEEP), + /* H22 : IMGCLKOUT3 ==> WCAM_MCLK_R */ + PAD_CFG_NF(GPP_H22, NONE, DEEP, NF1), + /* H23 : SRCCLKREQ5# ==> WWAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_H23, NONE, DEEP, NF2), + + /* R0 : HDA_BCLK ==> I2S_HP_SCLK_R */ + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), + /* R1 : HDA_SYNC ==> I2S_HP_SFRM_R */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), + /* R2 : HDA_SDO ==> I2S_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), + /* R3 : HDA_SDIO ==> I2S_PCH_RX_HP_TX */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), + /* R4 : HDA_RST# ==> I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF2), + /* R5 : HDA_SDI1 ==> I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2), + /* R6 : I2S2_TXD ==> I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2), + /* R7 : I2S2_RXD ==> I2S_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2), + + /* S0 : SNDW0_CLK ==> SDW_HP_CLK_R */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1), + /* S1 : SNDW0_DATA ==> SDW_HP_DATA_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1), + /* S2 : SNDW1_CLK ==> DMIC_CLK0_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF2), + /* S3 : SNDW1_DATA ==> DMIC_DATA0_R */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF2), + /* S4 : SNDW2_CLK ==> SDW_SPKR_CLK */ + PAD_CFG_NF(GPP_S4, NONE, DEEP, NF1), + /* S5 : SNDW2_DATA ==> SDW_SPKR_DATA */ + PAD_CFG_NF(GPP_S5, NONE, DEEP, NF1), + /* S6 : SNDW3_CLK ==> DMIC_CLK1_R */ + PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2), + /* S7 : SNDW3_DATA ==> DMIC_DATA1_R */ + PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2), + + /* GPD0: BATLOW# ==> BATLOW_L */ + PAD_CFG_NF(GPD0, NONE, DEEP, NF1), + /* GPD1: ACPRESENT ==> PCH_ACPRESENT */ + PAD_CFG_NF(GPD1, NONE, DEEP, NF1), + /* GPD2 : LAN_WAKE# ==> EC_PCH_WAKE_ODL */ + PAD_CFG_NF(GPD2, NONE, DEEP, NF1), + /* GPD3: PWRBTN# ==> EC_PCH_PWR_BTN_ODL */ + PAD_CFG_NF(GPD3, NONE, DEEP, NF1), + /* GPD4: SLP_S3# ==> SLP_S3_L */ + PAD_CFG_NF(GPD4, NONE, DEEP, NF1), + /* GPD5: SLP_S4# ==> SLP_S4_L */ + PAD_CFG_NF(GPD5, NONE, DEEP, NF1), + /* GPD6: SLP_A# ==> SLP_A_L */ + PAD_CFG_NF(GPD6, NONE, DEEP, NF1), + /* GPD7: GPD7_STRAP */ + PAD_NC(GPD7, NONE), + /* GPD8: SUSCLK ==> PCH_SUSCLK */ + PAD_CFG_NF(GPD8, NONE, DEEP, NF1), + /* GPD9: SLP_WLAN# ==> SLP_WLAN_L */ + PAD_CFG_NF(GPD9, NONE, DEEP, NF1), + /* GPD10: SLP_S5# ==> SLP_S5_L */ + PAD_CFG_NF(GPD10, NONE, DEEP, NF1), + /* GPD11: LANPHYC ==> WWAN_CONFIG1 */ + PAD_CFG_GPI(GPD11, NONE, DEEP), + + /* Virtual GPIO */ + /* Put unused Cnvi BT UART lines in NC mode since we use USB mode. */ + PAD_NC(GPP_VGPIO_6, NONE), + PAD_NC(GPP_VGPIO_7, NONE), + PAD_NC(GPP_VGPIO_8, NONE), + PAD_NC(GPP_VGPIO_9, NONE), + + /* Put unused Cnvi UART0 lines in NC mode since we use USB mode. */ + PAD_NC(GPP_VGPIO_18, NONE), + PAD_NC(GPP_VGPIO_19, NONE), + PAD_NC(GPP_VGPIO_20, NONE), + PAD_NC(GPP_VGPIO_21, NONE), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A12 : SATAXPCIE1 ==> EN_PPVAR_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC_LOCK(GPP_A13, NONE, LEVEL, INVERT, LOCK_CONFIG), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L + * To meet timing constrains - drive reset low. + * Deasserted in ramstage. + */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_E15, NONE, LOCK_CONFIG), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_NC(GPP_H13, UP_20K), +}; + +const struct pad_config *__weak variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *__weak variant_gpio_override_table(size_t *num) +{ + *num = 0; + return NULL; +} + +const struct pad_config *__weak variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +static const struct cros_gpio cros_gpios[] = { + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), + CROS_GPIO_WP_AH(GPIO_PCH_WP, CROS_GPIO_DEVICE_NAME), +}; + +DECLARE_WEAK_CROS_GPIOS(cros_gpios); + +const struct pad_config *__weak variant_romstage_gpio_table(size_t *num) +{ + *num = 0; + return NULL; +} diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/ec.h b/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/ec.h new file mode 100644 index 0000000000..3c7fde5f54 --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/ec.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> +#include <baseboard/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_CHARGER) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX)) +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) +/* + * EC can wake from S3/S0ix with: + * 1. Lid open + * 2. AC Connect/Disconnect + * 3. Power button + * 4. Key press + * 5. Mode change + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) +#define MAINBOARD_EC_S0IX_WAKE_EVENTS \ + (MAINBOARD_EC_S3_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_HANG_DETECT)) +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) +/* + * ACPI related definitions for ASL code. + */ +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE +/* Enable Keyboard Backlight */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT +/* Enable MKBP for buttons and switches */ +#define EC_ENABLE_MKBP_DEVICE +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ +#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */ + +#define EC_ENABLE_SYNC_IRQ /* Enable tight timestamp / wake support */ + +#endif /* __BASEBOARD_EC_H__ */ diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/gpio.h b/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/gpio.h new file mode 100644 index 0000000000..0de7ffd36c --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/include/baseboard/gpio.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __BASEBOARD_GPIO_H__ +#define __BASEBOARD_GPIO_H__ + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* eSPI virtual wire reporting */ +#define EC_SCI_GPI GPE0_ESPI +/* EC wake is EC_PCH_INT which is routed to GPP_F17 pin */ +#define GPE_EC_WAKE GPE0_DW2_17 +/* WP signal to PCH */ +#define GPIO_PCH_WP GPP_E15 +/* EC in RW or RO */ +#define GPIO_EC_IN_RW GPP_F18 +/* Used to gate SoC's SLP_S0# signal */ +#define GPIO_SLP_S0_GATE GPP_F9 +/* GPIO IRQ for tight timestamps / wake support */ +#define EC_SYNC_IRQ GPP_F17_IRQ + +#endif /* __BASEBOARD_GPIO_H__ */ diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/memory.c b/src/mainboard/google/brya/variants/baseboard/skolas/memory.c new file mode 100644 index 0000000000..bcad9b4be9 --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/memory.c @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <gpio.h> + +static const struct mb_cfg baseboard_memcfg = { + .type = MEM_TYPE_LP4X, + + .rcomp = { + /* Baseboard uses only 100ohm Rcomp resistors */ + .resistor = 100, + + /* Baseboard Rcomp target values */ + .targets = {40, 30, 30, 30, 30}, + }, + + /* DQ byte map */ + .lpx_dq_map = { + .ddr0 = { + .dq0 = { 9, 11, 8, 10, 12, 14, 13, 15, }, + .dq1 = { 4, 7, 6, 5, 2, 3, 0, 1, }, + }, + .ddr1 = { + .dq0 = { 15, 12, 14, 13, 9, 10, 11, 8, }, + .dq1 = { 0, 1, 3, 2, 7, 5, 4, 6, }, + }, + .ddr2 = { + .dq0 = { 2, 3, 1, 0, 6, 7, 5, 4, }, + .dq1 = { 15, 9, 14, 8, 11, 10, 13, 12, }, + }, + .ddr3 = { + .dq0 = { 3, 1, 2, 0, 4, 6, 7, 5, }, + .dq1 = { 13, 15, 14, 12, 11, 9, 8, 10, }, + }, + .ddr4 = { + .dq0 = { 13, 12, 14, 15, 9, 8, 10, 11, }, + .dq1 = { 4, 7, 5, 6, 1, 2, 0, 3, }, + }, + .ddr5 = { + .dq0 = { 5, 0, 6, 4, 3, 1, 7, 2, }, + .dq1 = { 11, 9, 10, 8, 15, 12, 14, 13, }, + }, + .ddr6 = { + .dq0 = { 15, 12, 14, 13, 10, 9, 11, 8, }, + .dq1 = { 0, 1, 2, 3, 5, 6, 4, 7, }, + }, + .ddr7 = { + .dq0 = { 0, 3, 1, 2, 4, 5, 6, 7, }, + .dq1 = { 11, 8, 13, 14, 9, 12, 15, 10, }, + }, + }, + + /* DQS CPU<>DRAM map */ + .lpx_dqs_map = { + .ddr0 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr1 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr2 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr3 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr4 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr5 = { .dqs0 = 0, .dqs1 = 1 }, + .ddr6 = { .dqs0 = 1, .dqs1 = 0 }, + .ddr7 = { .dqs0 = 0, .dqs1 = 1 }, + }, + + .ect = 1, /* Enable Early Command Training */ +}; + +const struct mb_cfg *__weak variant_memory_params(void) +{ + return &baseboard_memcfg; +} + +int __weak variant_memory_sku(void) +{ + /* + * Memory configuration board straps + * GPIO_MEM_CONFIG_0 GPP_E11 + * GPIO_MEM_CONFIG_1 GPP_E2 + * GPIO_MEM_CONFIG_2 GPP_E1 + * GPIO_MEM_CONFIG_3 GPP_E12 + */ + gpio_t spd_gpios[] = { + GPP_E11, + GPP_E2, + GPP_E1, + GPP_E12, + }; + + return gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios)); +} + +bool __weak variant_is_half_populated(void) +{ + /* GPIO_MEM_CH_SEL GPP_E13 */ + return gpio_get(GPP_E13); +} + +void __weak variant_get_spd_info(struct mem_spd *spd_info) +{ + spd_info->topo = MEM_TOPO_MEMORY_DOWN; + spd_info->cbfs_index = variant_memory_sku(); +} diff --git a/src/mainboard/google/brya/variants/baseboard/skolas/ramstage.c b/src/mainboard/google/brya/variants/baseboard/skolas/ramstage.c new file mode 100644 index 0000000000..9c2d4aa0b7 --- /dev/null +++ b/src/mainboard/google/brya/variants/baseboard/skolas/ramstage.c @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <acpi/acpi_device.h> +#include <baseboard/variants.h> +#include <console/console.h> +#include <device/pci_ops.h> +#include <soc/pci_devs.h> + +#include <drivers/intel/dptf/chip.h> +#include <intelblocks/power_limit.h> + +WEAK_DEV_PTR(dptf_policy); + +void variant_update_power_limits(const struct cpu_power_limits *limits, size_t num_entries) +{ + if (!num_entries) + return; + + const struct device *policy_dev = DEV_PTR(dptf_policy); + if (!policy_dev) + return; + + struct drivers_intel_dptf_config *config = policy_dev->chip_info; + + uint16_t mchid = pci_s_read_config16(PCI_DEV(0, 0, 0), PCI_DEVICE_ID); + + u8 tdp = get_cpu_tdp(); + + for (size_t i = 0; i < num_entries; i++) { + if (mchid == limits[i].mchid && tdp == limits[i].cpu_tdp) { + struct dptf_power_limits *settings = &config->controls.power_limits; + config_t *conf = config_of_soc(); + struct soc_power_limits_config *soc_config = conf->power_limits_config; + settings->pl1.min_power = limits[i].pl1_min_power; + settings->pl1.max_power = limits[i].pl1_max_power; + settings->pl2.min_power = limits[i].pl2_min_power; + settings->pl2.max_power = limits[i].pl2_max_power; + soc_config->tdp_pl4 = DIV_ROUND_UP(limits[i].pl4_power, + MILLIWATTS_TO_WATTS); + printk(BIOS_INFO, "Overriding power limits PL1 (%u, %u) PL2 (%u, %u) PL4 (%u)\n", + limits[i].pl1_min_power, + limits[i].pl1_max_power, + limits[i].pl2_min_power, + limits[i].pl2_max_power, + limits[i].pl4_power); + } + } +} diff --git a/src/mainboard/google/brya/variants/skolas4es/Makefile.inc b/src/mainboard/google/brya/variants/skolas4es/Makefile.inc new file mode 100644 index 0000000000..52d03980da --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/Makefile.inc @@ -0,0 +1,6 @@ +bootblock-y += gpio.c +romstage-y += gpio.c +ramstage-$(CONFIG_FW_CONFIG) += fw_config.c +ramstage-$(CONFIG_FW_CONFIG) += variant.c +ramstage-y += gpio.c +ramstage-y += ramstage.c diff --git a/src/mainboard/google/brya/variants/skolas4es/fw_config.c b/src/mainboard/google/brya/variants/skolas4es/fw_config.c new file mode 100644 index 0000000000..c2b963fe22 --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/fw_config.c @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootstate.h> +#include <console/console.h> +#include <fw_config.h> +#include <gpio.h> + +static const struct pad_config dmic_enable_pads[] = { + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF2), /* DMIC_CLK0_R */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF2), /* DMIC_DATA0_R */ + PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2), /* DMIC_CLK1_R */ + PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2), /* DMIC_DATA1_R */ +}; + +static const struct pad_config dmic_disable_pads[] = { + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), + PAD_NC(GPP_S6, NONE), + PAD_NC(GPP_S7, NONE), +}; + +static const struct pad_config sndw_enable_pads[] = { + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1), /* SDW_HP_CLK_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1), /* SDW_HP_DATA_R */ + PAD_CFG_NF(GPP_S4, NONE, DEEP, NF1), /* SDW_SPKR_CLK */ + PAD_CFG_NF(GPP_S5, NONE, DEEP, NF1), /* SDW_SPKR_DATA */ +}; + +static const struct pad_config max98360_enable_pads[] = { + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2), /* DMIC_CLK0_R */ + PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2), /* DMIC_DATA0_R */ + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK1_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA1_R */ + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), +}; + +static const struct pad_config sndw_disable_pads[] = { + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S4, NONE), + PAD_NC(GPP_S5, NONE), +}; + +static const struct pad_config i2s0_enable_pads[] = { + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK_R */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM_R */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */ +}; + +static const struct pad_config i2s2_enable_pads[] = { + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF2), /* I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2), /* I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2), /* I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2), /* I2S_PCH_RX_SPKR_TX */ +}; + +static const struct pad_config i2s0_disable_pads[] = { + PAD_NC(GPP_R0, NONE), + PAD_NC(GPP_R1, NONE), + PAD_NC(GPP_R2, NONE), + PAD_NC(GPP_R3, NONE), +}; + +static const struct pad_config i2s2_disable_pads[] = { + PAD_NC(GPP_R4, NONE), + PAD_NC(GPP_R5, NONE), + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), +}; + +static const struct pad_config bt_i2s_enable_pads[] = { + PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), /* BT_I2S_BCLK */ + PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), /* BT_I2S_SYNC */ + PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), /* BT_I2S_SDO */ + PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), /* BT_I2S_SDI */ + PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* SSP2_SCLK */ + PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* SSP2_SFRM */ + PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* SSP_TXD */ + PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* SSP_RXD */ +}; + +static const struct pad_config bt_i2s_disable_pads[] = { + PAD_NC(GPP_VGPIO_30, NONE), + PAD_NC(GPP_VGPIO_31, NONE), + PAD_NC(GPP_VGPIO_32, NONE), + PAD_NC(GPP_VGPIO_33, NONE), + PAD_NC(GPP_VGPIO_34, NONE), + PAD_NC(GPP_VGPIO_35, NONE), + PAD_NC(GPP_VGPIO_36, NONE), + PAD_NC(GPP_VGPIO_37, NONE), +}; + +static void enable_i2s(void) +{ + gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); + gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads)); + gpio_configure_pads(i2s2_enable_pads, ARRAY_SIZE(i2s2_enable_pads)); + gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads)); +} + +static void fw_config_handle(void *unused) +{ + if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) { + printk(BIOS_INFO, "Disable audio related GPIO pins.\n"); + gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads)); + gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads)); + gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads)); + gpio_configure_pads(sndw_disable_pads, ARRAY_SIZE(sndw_disable_pads)); + return; + } + + if (fw_config_probe(FW_CONFIG(AUDIO, MAX98373_ALC5682_SNDW))) { + printk(BIOS_INFO, "Configure audio over SoundWire with MAX98373 ALC5682.\n"); + gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); + gpio_configure_pads(sndw_enable_pads, ARRAY_SIZE(sndw_enable_pads)); + printk(BIOS_INFO, "BT offload enabled\n"); + gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads)); + gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads)); + gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads)); + } else if (!fw_config_probe(FW_CONFIG(AUDIO, MAX98360_ALC5682I_I2S))) { + printk(BIOS_INFO, "BT offload disabled\n"); + gpio_configure_pads(i2s0_disable_pads, ARRAY_SIZE(i2s0_disable_pads)); + gpio_configure_pads(i2s2_disable_pads, ARRAY_SIZE(i2s2_disable_pads)); + gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads)); + } + + if (fw_config_probe(FW_CONFIG(AUDIO, MAX98357_ALC5682I_I2S))) { + printk(BIOS_INFO, "Configure audio over I2S with MAX98357 ALC5682I.\n"); + enable_i2s(); + } + + if (fw_config_probe(FW_CONFIG(AUDIO, ALC1019_NAU88L25B_I2S))) { + printk(BIOS_INFO, "Configure audio over I2S with ALC1019 NAU88L25B.\n"); + enable_i2s(); + } + + if (fw_config_probe(FW_CONFIG(AUDIO, MAX98360_ALC5682I_I2S))) { + printk(BIOS_INFO, "Configure audio over I2S with MAX98360 ALC5682I.\n"); + gpio_configure_pads(max98360_enable_pads, ARRAY_SIZE(max98360_enable_pads)); + printk(BIOS_INFO, "BT offload enabled\n"); + gpio_configure_pads(i2s0_enable_pads, ARRAY_SIZE(i2s0_enable_pads)); + gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads)); + } +} +BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/brya/variants/skolas4es/gpio.c b/src/mainboard/google/brya/variants/skolas4es/gpio.c new file mode 100644 index 0000000000..251348beaa --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/gpio.c @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/variants.h> +#include <boardid.h> +#include <soc/gpio.h> + +static const struct pad_config board_id0_1_overrides[] = { + /* B2 : VRALERT# ==> NC */ + PAD_NC(GPP_B2, NONE), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF_LOCK(GPP_B7, NONE, NF2, LOCK_CONFIG), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF_LOCK(GPP_B8, NONE, NF2, LOCK_CONFIG), + /* B15 : TIME_SYNC0 ==> NC */ + PAD_NC(GPP_B15, NONE), + /* C3 : SML0CLK ==> NC */ + PAD_NC(GPP_C3, NONE), + /* C4 : SML0DATA ==> NC */ + PAD_NC(GPP_C4, NONE), + /* D13 : ISH_UART0_RXD ==> PCH_I2C_CAM_SDA */ + PAD_CFG_NF(GPP_D13, NONE, DEEP, NF3), + /* D14 : ISH_UART0_TXD ==> PCH_I2C_CAM_SCL */ + PAD_CFG_NF(GPP_D14, NONE, DEEP, NF3), + /* F19 : SRCCLKREQ6# ==> WWAN_SIM1_DET_OD */ + PAD_CFG_GPI(GPP_F19, UP_20K, DEEP), + /* F20 : EXT_PWR_GATE# ==> HPS_RST_R */ + PAD_CFG_GPO(GPP_F20, 0, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WAKE_ON_WWAN_ODL */ + PAD_NC(GPP_F21, NONE), + /* H21 : IMGCLKOUT2 ==> WLAN_INT_L */ + PAD_CFG_GPI_APIC(GPP_H21, NONE, DEEP, EDGE_SINGLE, NONE), + /* GPD2: LAN_WAKE# ==> NC */ + PAD_NC(GPD2, NONE), +}; + +/* Early pad configuration in bootblock for board id < 2 */ +static const struct pad_config early_gpio_table[] = { + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E0, 0, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* F21 : EXT_PWR_GATE2# ==> NC */ + PAD_NC(GPP_F21, NONE), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_NC(GPP_H13, UP_20K), +}; + +/* Early pad configuration in bootblock for board id 2 */ +static const struct pad_config early_gpio_table_id2[] = { + /* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E0, 0, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */ + PAD_CFG_GPO(GPP_F21, 0, DEEP), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_NC(GPP_H13, UP_20K), +}; + +/* Early pad configuration in bootblock for board id 4 */ +static const struct pad_config early_gpio_table_id4[] = { + /* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* H6 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external + * pull-down. To ensure proper power sequencing for the FPMCU device, + * reset signal is driven low early on in bootblock, followed by + * enabling of power. Reset signal is deasserted later on in ramstage. + * Since reset signal is asserted in bootblock, it results in FPMCU not + * working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E0, 0, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */ + PAD_CFG_GPO(GPP_F21, 0, DEEP), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_NC(GPP_H13, UP_20K), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */ + PAD_CFG_GPO(GPP_F21, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + const uint32_t id = board_id(); + if (id == BOARD_ID_UNKNOWN || id < 2) { + *num = ARRAY_SIZE(board_id0_1_overrides); + return board_id0_1_overrides; + } + + *num = 0; + return NULL; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + const uint32_t id = board_id(); + if (id == BOARD_ID_UNKNOWN || id < 2) { + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; + } else if (id >= 4) { + *num = ARRAY_SIZE(early_gpio_table_id4); + return early_gpio_table_id4; + } + + *num = ARRAY_SIZE(early_gpio_table_id2); + return early_gpio_table_id2; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} diff --git a/src/mainboard/google/brya/variants/skolas4es/include/variant/ec.h b/src/mainboard/google/brya/variants/skolas4es/include/variant/ec.h new file mode 100644 index 0000000000..4fc0622f15 --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/include/variant/ec.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef MAINBOARD_EC_H +#define MAINBOARD_EC_H + +#include <baseboard/ec.h> + +#endif /* MAINBOARD_GPIO_H */ diff --git a/src/mainboard/google/brya/variants/skolas4es/include/variant/gpio.h b/src/mainboard/google/brya/variants/skolas4es/include/variant/gpio.h new file mode 100644 index 0000000000..23338de2d8 --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/include/variant/gpio.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __MAINBOARD_GPIO_H__ +#define __MAINBOARD_GPIO_H__ + +#include <baseboard/gpio.h> + +#define WWAN_FCPO GPP_F21 +#define WWAN_RST GPP_E16 +#define WWAN_PERST GPP_E0 +#define T1_OFF_MS 16 +#define T2_OFF_MS 2 + +#endif /* __MAINBOARD_GPIO_H__ */ diff --git a/src/mainboard/google/brya/variants/skolas4es/memory/Makefile.inc b/src/mainboard/google/brya/variants/skolas4es/memory/Makefile.inc new file mode 100644 index 0000000000..e930ba212c --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/memory/Makefile.inc @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/skolas4es/memory src/mainboard/google/brya/variants/skolas4es/memory/mem_parts_used.txt + +SPD_SOURCES = +SPD_SOURCES += spd/lp4x/set-0/spd-1.hex # ID = 0(0b0000) Parts = MT53E512M32D2NP-046 WT:F, H9HCNNNBKMMLXR-NEE +SPD_SOURCES += spd/lp4x/set-0/spd-4.hex # ID = 1(0b0001) Parts = MT53E1G32D2NP-046 WT:A +SPD_SOURCES += spd/lp4x/set-0/spd-7.hex # ID = 2(0b0010) Parts = MT53E2G32D4NQ-046 WT:A +SPD_SOURCES += spd/lp4x/set-0/spd-3.hex # ID = 3(0b0011) Parts = H9HCNNNCPMMLXR-NEE, MT53E1G32D2NP-046 WT:B diff --git a/src/mainboard/google/brya/variants/skolas4es/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/skolas4es/memory/dram_id.generated.txt new file mode 100644 index 0000000000..01b197a4de --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/memory/dram_id.generated.txt @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/skolas4es/memory src/mainboard/google/brya/variants/skolas4es/memory/mem_parts_used.txt + +DRAM Part Name ID to assign +MT53E512M32D2NP-046 WT:F 0 (0000) +H9HCNNNBKMMLXR-NEE 0 (0000) +MT53E1G32D2NP-046 WT:A 1 (0001) +MT53E2G32D4NQ-046 WT:A 2 (0010) +H9HCNNNCPMMLXR-NEE 3 (0011) +MT53E1G32D2NP-046 WT:B 3 (0011) diff --git a/src/mainboard/google/brya/variants/skolas4es/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/skolas4es/memory/mem_parts_used.txt new file mode 100644 index 0000000000..c8a24ccd6d --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/memory/mem_parts_used.txt @@ -0,0 +1,6 @@ +MT53E512M32D2NP-046 WT:F +H9HCNNNBKMMLXR-NEE +MT53E1G32D2NP-046 WT:A +MT53E2G32D4NQ-046 WT:A +H9HCNNNCPMMLXR-NEE +MT53E1G32D2NP-046 WT:B diff --git a/src/mainboard/google/brya/variants/skolas4es/overridetree.cb b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb new file mode 100644 index 0000000000..6f0eb2168e --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/overridetree.cb @@ -0,0 +1,827 @@ +fw_config + field DB_USB 0 3 + option USB_ABSENT 0 + option USB3_PS8815 1 + end + field DB_SD 4 5 + option SD_ABSENT 0 + option SD_GL9755S 1 + end + field KB_BL 7 7 + option KB_BL_ABSENT 0 + option KB_BL_PRESENT 1 + end + field AUDIO 8 10 + option AUDIO_UNKNOWN 0 + option MAX98357_ALC5682I_I2S 1 + option MAX98373_ALC5682_SNDW 2 + option MAX98373_NAU88L25B_I2S 3 + option ALC1019_NAU88L25B_I2S 4 + option MAX98360_ALC5682I_I2S 5 + end + field DB_LTE 11 12 + option LTE_ABSENT 0 + option LTE_USB 1 + option LTE_PCIE 2 + end + field UFC 13 14 + option UFC_USB 0 + option UFC_MIPI_IMX208 1 + end + # Bits 15 and 16 were intended for WFC but never declared here + field HPS 17 17 + option HPS_ABSENT 0 + option HPS_PRESENT 1 + end +end + +chip soc/intel/alderlake + register "sagv" = "SaGv_Enabled" + + register "platform_pmax" = "145" + + register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Type-A MLB Port + + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port + + register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}" + + # FIVR configurations for brya are disabled since the board doesn't have V1p05 and Vnn + # bypass rails implemented. + register "ext_fivr_settings" = "{ + .configure_ext_fivr = 1, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio | + #| I2C1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C2 | SAR | + #| I2C3 | TouchScreen | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 900, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DRAM_SOC"" + register "options.tsr[1].desc" = ""Ambient"" + register "options.tsr[2].desc" = ""Charger"" + register "options.tsr[3].desc" = ""WWAN"" + + # TODO: below values are initial reference values only + ## Active Policy + register "policies.active" = "{ + [0] = { + .target = DPTF_CPU, + .thresholds = { + TEMP_PCT(85, 90), + TEMP_PCT(80, 80), + TEMP_PCT(75, 70), + TEMP_PCT(70, 50), + TEMP_PCT(65, 30), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_1, + .thresholds = { + TEMP_PCT(50, 90), + TEMP_PCT(48, 70), + TEMP_PCT(46, 60), + TEMP_PCT(43, 40), + TEMP_PCT(40, 30), + } + } + }" + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 5000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 75, 5000), + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 85, SHUTDOWN), + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 3000, + .max_power = 15000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 55000, + .max_power = 55000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 1700 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on + # MIPI lanes are split between UFC and WFC depending on + # whether the UFC is USB or MIPI hence probing UFC_USB + probe UFC UFC_USB + end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{4,2}" # 4 and 2 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" + register "cio2_lane_endpoint[1]" = ""^I2C2.CAM1"" + register "cio2_prt[0]" = "2" + register "cio2_prt[1]" = "1" + device generic 1 on + probe UFC UFC_MIPI_IMX208 + end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + register "enable_cnvi_ddr_rfim" = "true" + device generic 0 on end + end + end + device ref pcie_rp6 on + # Enable WWAN PCIE 6 using clk 5 + register "pch_pcie_rp[PCH_RP(6)]" = "{ + .clk_src = 5, + .clk_req = 5, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + chip soc/intel/common/block/pcie/rtd3 + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)" + register "reset_off_delay_ms" = "20" + # register "reset_delay_ms" = "1000" + register "srcclk_pin" = "5" + register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL" + register "skip_on_off_support" = "true" + device generic 0 alias rp6_rtd3 on + probe DB_LTE LTE_PCIE + end + end + chip drivers/wwan/fm + register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F21)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)" + register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)" + register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A7)" + register "add_acpi_dma_property" = "true" + use rp6_rtd3 as rtd3dev + device generic 0 on + probe DB_LTE LTE_PCIE + end + end + probe DB_LTE LTE_PCIE + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port3 as dfp[0].typec_port + device generic 0 on end + end + end + device ref pcie_rp8 on + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)" + register "srcclk_pin" = "3" + device generic 0 on end + end + end #PCIE8 SD card + device ref i2c0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO MAX98357_ALC5682I_I2S + probe AUDIO MAX98360_ALC5682I_I2S + end + end + chip drivers/i2c/nau8825 + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0c" + register "sar_threshold[1]" = "0x1c" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "0" # VDDA + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on + probe AUDIO ALC1019_NAU88L25B_I2S + end + end + chip drivers/generic/alc1015 + register "hid" = ""RTL1019"" + register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" + device generic 1 on + probe AUDIO ALC1019_NAU88L25B_I2S + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI8856"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 8856 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "4" + register "ssdb.link_used" = "0" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "2" + register "link_freq[0]" = "360 * MHz" # 360 MHz + register "link_freq[1]" = "180 * MHz" # 180 MHz + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2 + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 10 on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "2" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW9768 VCM"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "vcm_compat" = ""dongwoon,dw9768"" + + device i2c 0C on end + end + chip drivers/intel/mipi_camera + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""AT24 EEPROM"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" + register "nvm_compat" = ""atmel,24c1024"" + + register "nvm_size" = "0x2800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x10" + + device i2c 58 on end + end + end #I2C0 + device ref i2c1 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" + device i2c 50 on end + end + end #I2C1 + device ref i2c2 on + chip drivers/i2c/sx9324 + register "desc" = ""SAR1 Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "1" + register "reg_gnrl_ctrl0" = "0x16" + register "reg_gnrl_ctrl1" = "0x21" + register "reg_afe_ctrl0" = "0x00" + register "reg_afe_ctrl1" = "0x10" + register "reg_afe_ctrl2" = "0x00" + register "reg_afe_ctrl3" = "0x00" + register "reg_afe_ctrl4" = "0x07" + register "reg_afe_ctrl5" = "0x00" + register "reg_afe_ctrl6" = "0x00" + register "reg_afe_ctrl7" = "0x07" + register "reg_afe_ctrl8" = "0x12" + register "reg_afe_ctrl9" = "0x0f" + register "reg_prox_ctrl0" = "0x12" + register "reg_prox_ctrl1" = "0x12" + register "reg_prox_ctrl2" = "0x90" + register "reg_prox_ctrl3" = "0x60" + register "reg_prox_ctrl4" = "0x0c" + register "reg_prox_ctrl5" = "0x12" + register "reg_prox_ctrl6" = "0x3c" + register "reg_prox_ctrl7" = "0x58" + register "reg_adv_ctrl0" = "0x00" + register "reg_adv_ctrl1" = "0x00" + register "reg_adv_ctrl2" = "0x00" + register "reg_adv_ctrl3" = "0x00" + register "reg_adv_ctrl4" = "0x00" + register "reg_adv_ctrl5" = "0x05" + register "reg_adv_ctrl6" = "0x00" + register "reg_adv_ctrl7" = "0x00" + register "reg_adv_ctrl8" = "0x00" + register "reg_adv_ctrl9" = "0x00" + register "reg_adv_ctrl10" = "0x5c" + register "reg_adv_ctrl11" = "0x52" + register "reg_adv_ctrl12" = "0xb5" + register "reg_adv_ctrl13" = "0x00" + register "reg_adv_ctrl14" = "0x80" + register "reg_adv_ctrl15" = "0x0c" + register "reg_adv_ctrl16" = "0x38" + register "reg_adv_ctrl17" = "0x56" + register "reg_adv_ctrl18" = "0x33" + register "reg_adv_ctrl19" = "0xf0" + register "reg_adv_ctrl20" = "0xf0" + device i2c 28 on end + end + chip drivers/i2c/sx9324 + register "desc" = ""SAR2 Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "2" + register "reg_gnrl_ctrl0" = "0x16" + register "reg_gnrl_ctrl1" = "0x21" + register "reg_afe_ctrl0" = "0x00" + register "reg_afe_ctrl1" = "0x10" + register "reg_afe_ctrl2" = "0x00" + register "reg_afe_ctrl3" = "0x00" + register "reg_afe_ctrl4" = "0x07" + register "reg_afe_ctrl5" = "0x00" + register "reg_afe_ctrl6" = "0x00" + register "reg_afe_ctrl7" = "0x07" + register "reg_afe_ctrl8" = "0x12" + register "reg_afe_ctrl9" = "0x0f" + register "reg_prox_ctrl0" = "0x12" + register "reg_prox_ctrl1" = "0x12" + register "reg_prox_ctrl2" = "0x90" + register "reg_prox_ctrl3" = "0x60" + register "reg_prox_ctrl4" = "0x0c" + register "reg_prox_ctrl5" = "0x12" + register "reg_prox_ctrl6" = "0x3c" + register "reg_prox_ctrl7" = "0x58" + register "reg_adv_ctrl0" = "0x00" + register "reg_adv_ctrl1" = "0x00" + register "reg_adv_ctrl2" = "0x00" + register "reg_adv_ctrl3" = "0x00" + register "reg_adv_ctrl4" = "0x00" + register "reg_adv_ctrl5" = "0x05" + register "reg_adv_ctrl6" = "0x00" + register "reg_adv_ctrl7" = "0x00" + register "reg_adv_ctrl8" = "0x00" + register "reg_adv_ctrl9" = "0x00" + register "reg_adv_ctrl10" = "0x5c" + register "reg_adv_ctrl11" = "0x52" + register "reg_adv_ctrl12" = "0xb5" + register "reg_adv_ctrl13" = "0x00" + register "reg_adv_ctrl14" = "0x80" + register "reg_adv_ctrl15" = "0x0c" + register "reg_adv_ctrl16" = "0x38" + register "reg_adv_ctrl17" = "0x56" + register "reg_adv_ctrl18" = "0x33" + register "reg_adv_ctrl19" = "0xf0" + register "reg_adv_ctrl20" = "0xf0" + device i2c 2C on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3478"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""imx 208 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "2" + register "link_freq[0]" = "384 * MHz" # 384 MHz + register "link_freq[1]" = "96 * MHz" # 96 MHz + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X + register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_F20" #reset + register "gpio_panel.gpio[3].gpio_num" = "GPP_H21" #CLK_EN + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(3, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(3, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + device i2c 10 on + probe UFC UFC_MIPI_IMX208 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""ACPI_DT_NAMESPACE_HID"" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM1"" + register "chip_name" = ""GT24C16S"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC"" + register "nvm_compat" = ""atmel,24c1024"" + + register "nvm_size" = "0x800" + register "nvm_pagesize" = "0x01" + register "nvm_readonly" = "0x01" + register "nvm_width" = "0x08" + + device i2c 50 on + probe UFC UFC_MIPI_IMX208 + end + end + chip drivers/i2c/generic + register "hid" = ""GOOG0020"" + register "desc" = ""Chrome OS HPS"" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)" # EN_HPS_PWR + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E3_IRQ)" # HPS_INT_ODL + # HPS uses I2C addresses 0x30 and 0x51. + # The address we provide here is not significant because + # neither coreboot nor Linux have a driver for HPS, + # it's only used from userspace. + device i2c 30 on + probe HPS HPS_PRESENT + end + end + end #I2C2 + device ref i2c3 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN9050"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "300" + register "generic.reset_off_delay_ms" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "6" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x10 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "12" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x5d on end + end + chip drivers/i2c/hid + register "generic.hid" = ""SIS9815"" + register "generic.desc" = ""SIS Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_delay_ms" = "100" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "7" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x00" + device i2c 5c on end + end + end #I2C3 + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "wake" = "GPE0_DW2_14" + register "probed" = "1" + device i2c 15 on end + end + end #I2C5 + device ref hda on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" + register "sdmode_delay" = "5" + device generic 0 on + probe AUDIO MAX98357_ALC5682I_I2S + end + end + + chip drivers/generic/max98357a + register "hid" = ""MX98360A"" + register "sdmode_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" + register "sdmode_delay" = "5" + device generic 0 on + probe AUDIO MAX98360_ALC5682I_I2S + end + end + + chip drivers/intel/soundwire + device generic 0 on + probe AUDIO MAX98373_ALC5682_SNDW + chip drivers/soundwire/alc5682 + # SoundWire Link 0 ID 1 + register "desc" = ""Headset Codec"" + device generic 0.1 on end + end + chip drivers/soundwire/max98373 + # SoundWire Link 2 ID 3 + register "desc" = ""Left Speaker Amp"" + device generic 2.3 on end + end + chip drivers/soundwire/max98373 + # SoundWire Link 2 ID 7 + register "desc" = ""Right Speaker Amp"" + device generic 2.7 on end + end + end + end + end + device ref gspi1 on + chip drivers/spi/acpi + register "name" = ""CRFP"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "uid" = "1" + register "compat_string" = ""google,cros-ec-spi"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" + register "wake" = "GPE0_DW2_15" + device spi 0 on end + end # FPMCU + end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + use conn2 as mux_conn[2] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port2 as usb2_port + use tcss_usb3_port2 as usb3_port + device generic 1 alias conn1 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port3 as usb2_port + use tcss_usb3_port3 as usb3_port + device generic 2 alias conn2 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))" + device ref tcss_usb3_port3 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (DB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port6 on + probe UFC UFC_USB + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0 (DB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0 (DB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb3_port4 on end + end + end + end + end + end +end diff --git a/src/mainboard/google/brya/variants/skolas4es/ramstage.c b/src/mainboard/google/brya/variants/skolas4es/ramstage.c new file mode 100644 index 0000000000..970c628f50 --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/ramstage.c @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/variants.h> +#include <device/pci_ids.h> + +const struct cpu_power_limits limits[] = { + /* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */ + /* All values are for baseline config as per bug:191906315 comment #10 */ + { PCI_DID_INTEL_ADL_P_ID_7, 15, 3000, 15000, 39000, 39000, 100000 }, + { PCI_DID_INTEL_ADL_P_ID_6, 15, 3000, 15000, 39000, 39000, 100000 }, + { PCI_DID_INTEL_ADL_P_ID_5, 28, 4000, 28000, 43000, 43000, 105000 }, + { PCI_DID_INTEL_ADL_P_ID_3, 28, 4000, 28000, 43000, 43000, 105000 }, + { PCI_DID_INTEL_ADL_P_ID_3, 45, 5000, 45000, 80000, 80000, 159000 }, +}; + +void variant_devtree_update(void) +{ + size_t total_entries = ARRAY_SIZE(limits); + variant_update_power_limits(limits, total_entries); +} diff --git a/src/mainboard/google/brya/variants/skolas4es/variant.c b/src/mainboard/google/brya/variants/skolas4es/variant.c new file mode 100644 index 0000000000..e9ae51ea0f --- /dev/null +++ b/src/mainboard/google/brya/variants/skolas4es/variant.c @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <chip.h> +#include <fw_config.h> +#include <baseboard/variants.h> + +void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config) +{ + config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO, + MAX98373_ALC5682_SNDW)); +} |