diff options
Diffstat (limited to 'src/mainboard/supermicro')
| -rw-r--r-- | src/mainboard/supermicro/h8dmr/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr/Options.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/Options.lb | 16 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhe_g/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhe_g/Options.lb | 16 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhe_g2/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhe_g2/Options.lb | 16 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhr_ig/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhr_ig/Options.lb | 16 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhr_ig2/Config.lb | 14 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dhr_ig2/Options.lb | 16 |
12 files changed, 89 insertions, 89 deletions
diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb index 944e758735..4df0cc0547 100644 --- a/src/mainboard/supermicro/h8dmr/Config.lb +++ b/src/mainboard/supermicro/h8dmr/Config.lb @@ -21,7 +21,7 @@ ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FAILOVER_IMAGE default ROM_SECTION_SIZE = FAILOVER_SIZE @@ -38,18 +38,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -111,7 +111,7 @@ end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -139,7 +139,7 @@ end ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT if USE_FAILOVER_IMAGE @@ -188,7 +188,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb index aedf1d0c11..a1104129a3 100644 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ b/src/mainboard/supermicro/h8dmr/Options.lb @@ -62,7 +62,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses TTYS0_BAUD uses TTYS0_BASE @@ -145,7 +145,7 @@ default HAVE_FALLBACK_BOOT=1 default HAVE_FAILOVER_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -170,7 +170,7 @@ default HAVE_ACPI_TABLES=0 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -254,10 +254,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15d9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1511 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -276,7 +276,7 @@ default HEAP_SIZE=0x8000 default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00100000 @@ -328,7 +328,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb index fe04f33b86..668824f079 100644 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ b/src/mainboard/supermicro/x6dai_g/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS, +## Compute a range of ROM that can be cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index e40875a182..727f4dc4ab 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6780 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb index 2ba628f574..366a061168 100644 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of LinuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS. +## Compute a range of ROM that can be cached to speed up coreboot. ## execution speed. ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE @@ -74,7 +74,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -82,7 +82,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -102,7 +102,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index ebfe983951..e5c55bad58 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb index 02999838eb..748cfde55c 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of LinuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can be cached to speed up linuxBIOS. +## Compute a range of ROM that can be cached to speed up coreboot. ## execution speed. ## XIP_ROM_SIZE must be a power of 2. ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE @@ -74,7 +74,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -82,7 +82,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -102,7 +102,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index ebfe983951..e5c55bad58 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x6080 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb index 31425bfaa5..abd07e71a8 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index d92a8fd0a3..369cbe542d 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb index 11df62618a..ad9b6d04e6 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Config.lb @@ -5,7 +5,7 @@ default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## ## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## (coreboot plus bootloader) will live in the boot rom chip. ## if USE_FALLBACK_IMAGE default ROM_SECTION_SIZE = FALLBACK_SIZE @@ -17,18 +17,18 @@ end ## ## Compute the start location and size size of -## The linuxBIOS bootloader. +## The coreboot bootloader. ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## -## Compute where this copy of linuxBIOS will start in the boot rom +## Compute where this copy of coreboot will start in the boot rom ## default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) ## -## Compute a range of ROM that can cached to speed up linuxBIOS, +## Compute a range of ROM that can cached to speed up coreboot, ## execution speed. ## ## XIP_ROM_SIZE must be a power of 2. @@ -75,7 +75,7 @@ makerule ./auto.inc end ## -## Build our 16 bit and 32 bit linuxBIOS entry code +## Build our 16 bit and 32 bit coreboot entry code ## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc @@ -83,7 +83,7 @@ ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds ## -## Build our reset vector (This is where linuxBIOS is entered) +## Build our reset vector (This is where coreboot is entered) ## if USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc @@ -103,7 +103,7 @@ mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds ### -### This is the early phase of linuxBIOS startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index d92a8fd0a3..369cbe542d 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -34,7 +34,7 @@ uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses _RAMBASE @@ -75,7 +75,7 @@ default CONFIG_UDELAY_TSC=1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -97,7 +97,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -125,10 +125,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x15D9 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x5580 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -144,12 +144,12 @@ default HEAP_SIZE=0x8000 ### ### Compute the location and size of where this firmware image -### (linuxBIOS plus bootloader) will live in the boot rom chip. +### (coreboot plus bootloader) will live in the boot rom chip. ### default FALLBACK_SIZE=131072 ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -199,7 +199,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately |