diff options
Diffstat (limited to 'src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb')
| -rw-r--r-- | src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb new file mode 100644 index 0000000000..1039f7a0ca --- /dev/null +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssh-tf/overridetree.cb @@ -0,0 +1,103 @@ +chip soc/intel/skylake + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + register "gen1_dec" = "0x007c0a01" # Super IO SWC + register "gen2_dec" = "0x000c0ca1" # IPMI KCS + register "gen3_dec" = "0x000c03e1" # UART3 + register "gen4_dec" = "0x000c02e1" # UART4 + + # PCIe configuration + # Enable JPCIE1 + register "PcieRpEnable[0]" = "1" + register "PcieRpClkReqSupport[0]" = "0" + + # Enable ASpeed PCI bridge + register "PcieRpEnable[2]" = "1" + register "PcieRpClkReqSupport[2]" = "0" + + # Enable X550T (10GbE) + register "PcieRpEnable[4]" = "1" + register "PcieRpClkReqSupport[4]" = "0" + + # Enable M.2 + register "PcieRpEnable[8]" = "1" + register "PcieRpClkReqSupport[8]" = "0" + + device domain 0 on + device pci 01.0 on end # unused + device pci 01.1 on # PCIE Slot (JPCIE1) + smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT6 PCI-E 3.0 X8" "SlotDataBusWidth4X" + end + device pci 1c.0 on # PCI Express Port 1 (Slot JPCIE1) + smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthLong" "PCH SLOT4 PCI-E 3.0 X2(IN X4)" "SlotDataBusWidth2X" + end + device pci 1c.2 on # PCI Express Port 3 + device pci 00.0 on # Aspeed PCI Bridge + device pci 00.0 on end # Aspeed 2400 VGA + end + end + device pci 1c.4 on # PCI Express Port 5 + device pci 00.0 on end # 10GbE + device pci 00.1 on end # 10GbE + end + device pci 1d.0 on # PCI Express Port 9 + smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2 2280" "SlotDataBusWidth4X" + end + device pci 1f.0 on # LPC Interface + chip drivers/ipmi + # On cold boot it takes a while for the BMC to start the IPMI service + register "wait_for_bmc" = "1" + register "bmc_boot_timeout" = "60" + device pnp ca2.0 on end # IPMI KCS + end + chip superio/common + device pnp 2e.0 on + chip superio/aspeed/ast2400 + device pnp 2e.2 on # SUART1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # SUART2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 on # SWC + io 0x60 = 0xa00 + io 0x62 = 0xa10 + io 0x64 = 0xa20 + io 0x66 = 0xa30 + irq 0x70 = 0xb + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 0xc + end + device pnp 2e.7 on end # GPIO + device pnp 2e.b on # SUART3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.c on # SUART4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.d on end # iLPC2AHB + device pnp 2e.e on # Mailbox + io 0x60 = 0xa40 + irq 0x70 = 0x00 + end + end + end + end + end + end +end |