summaryrefslogtreecommitdiff
path: root/src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb')
-rw-r--r--src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb270
1 files changed, 270 insertions, 0 deletions
diff --git a/src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb b/src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb
new file mode 100644
index 0000000000..b022b81ee5
--- /dev/null
+++ b/src/mainboard/starlabs/starfighter/variants/rpl/devicetree.cb
@@ -0,0 +1,270 @@
+chip soc/intel/alderlake
+ # FSP UPDs
+ register "disable_dynamic_tccold_handshake" = "true"
+ register "eist_enable" = "true"
+ register "enable_c1e" = "true"
+ register "enable_c6dram" = "true"
+ register "sagv" = "SaGv_Enabled"
+
+ # Serial I/O
+ register "serial_io_i2c_mode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ }"
+
+ register "common_soc_config" = "{
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ }"
+
+ register "serial_io_uart_mode" = "{
+ [PchSerialIoIndexUART0] = PchSerialIoSkipInit,
+ }"
+
+ # Power
+ register "pch_slp_s3_min_assertion_width" = "2" # 50ms
+ register "pch_slp_s4_min_assertion_width" = "3" # 1s
+ register "pch_slp_sus_min_assertion_width" = "3" # 500ms
+ register "pch_slp_a_min_assertion_width" = "3" # 2s
+
+ device domain 0 on
+ device ref igpu on
+ register "ddi_portA_config" = "1"
+ register "ddi_ports_config" = "{
+ [DDI_PORT_A] = DDI_ENABLE_HPD,
+ [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+ }"
+ end
+ device ref pcie4_0 on # SSD x4
+ register "cpu_pcie_rp[CPU_RP(1)]" = "{
+ .clk_src = 4,
+ .clk_req = 4,
+ .flags = PCIE_RP_LTR | PCIE_RP_AER,
+
+ }"
+ smbios_slot_desc "SlotTypeM2Socket3"
+ "SlotLengthLong"
+ "M.2/M 2280"
+ "SlotDataBusWidth4X"
+ chip soc/intel/common/block/pcie/rtd3
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D14)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F20)"
+ register "srcclk_pin" = "4"
+ device generic 0 on end
+ end
+ end
+ device ref tbt_pcie_rp0 on end
+ device ref tbt_pcie_rp1 on end
+ device ref tcss_xhci on
+ chip drivers/usb/acpi
+ device ref tcss_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""Left Back USB Type-C""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ device ref tcss_usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Left Front USB Type-C""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ device ref tcss_usb3_port2 on end
+ end
+ end
+ end
+ end
+ device ref tcss_dma0 on
+ chip drivers/intel/usb4/retimer
+ register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
+ use tcss_usb3_port1 as dfp[0].typec_port
+ device generic 0 on end
+ end
+ chip drivers/intel/usb4/retimer
+ register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
+ use tcss_usb3_port2 as dfp[0].typec_port
+ device generic 0 on end
+ end
+ end
+ device ref gna on end
+ device ref xhci on
+ # Motherboard USB Type C #0
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"
+ register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
+
+ # Motherboard USB Type-C #1
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"
+ register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
+
+ # Motherboard USB Type-A #0
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC0)"
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+
+ # Removable Webcam
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)"
+
+ # I/O Board USB Type-A
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC0)"
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"
+
+ # Internal Bluetooth
+ register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"
+
+ chip drivers/usb/acpi
+ device ref xhci_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""Left Back USB Type-C""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ device ref usb2_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Left Front USB Type-C""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ device ref usb2_port2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Left USB Type-A""
+ register "type" = "UPC_TYPE_USB3_A"
+ device ref usb2_port3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Left USB Type-A""
+ register "type" = "UPC_TYPE_USB3_A"
+ device ref usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Right USB Type-A""
+ register "type" = "UPC_TYPE_USB3_A"
+ device ref usb2_port6 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Right USB Type-A""
+ register "type" = "UPC_TYPE_USB3_A"
+ device ref usb3_port2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Internal Webcam""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port5 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""Internal Bluetooth""
+ register "type" = "UPC_TYPE_INTERNAL"
+ device ref usb2_port10 on end
+ end
+ end
+ end
+ end
+ device ref i2c0 on
+ chip drivers/i2c/hid
+ register "generic.hid" = ""STAR0001""
+ register "generic.desc" = ""Touchpad""
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D11_IRQ)"
+ register "hid_desc_reg_offset" = "0x20"
+ device i2c 2c on end
+ end
+ end
+ device ref shared_sram on end
+ device ref sata on
+ register "sata_salp_support" = "1"
+ register "sata_ports_enable[1]" = "1"
+ register "sata_ports_dev_slp[1]" = "1"
+ end
+ device ref pcie_rp5 on # WiFi
+ chip drivers/wifi/generic
+ register "wake" = "GPE0_PME_B0"
+ device generic 0 on end
+ end
+ register "pch_pcie_rp[PCH_RP(5)]" = "{
+ .clk_src = 2,
+ .clk_req = 2,
+ .flags = PCIE_RP_LTR | PCIE_RP_AER,
+ }"
+ smbios_slot_desc "SlotTypePciExpressGen3X1"
+ "SlotLengthShort"
+ "M.2/M 2230"
+ "SlotDataBusWidth1X"
+ chip soc/intel/common/block/pcie/rtd3
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D13)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H2)"
+ register "srcclk_pin" = "2"
+ device generic 0 on end
+ end
+ end
+
+ device ref pcie_rp9 on # SSD x4
+ register "pch_pcie_rp[PCH_RP(9)]" = "{
+ .clk_src = 1,
+ .clk_req = 1,
+ .flags = PCIE_RP_LTR | PCIE_RP_AER,
+ .pcie_rp_detect_timeout_ms = 50,
+ }"
+ smbios_slot_desc "SlotTypeM2Socket3"
+ "SlotLengthLong"
+ "M.2/M 2280"
+ "SlotDataBusWidth4X"
+ chip soc/intel/common/block/pcie/rtd3
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D16)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H0)"
+ register "srcclk_pin" = "1"
+ device generic 0 on end
+ end
+ end
+ device ref uart0 on end
+ device ref pch_espi on
+ register "gen1_dec" = "0x00fc0201"
+ register "gen2_dec" = "0x00000381"
+ register "gen3_dec" = "0x00000511"
+
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+
+ chip ec/starlabs/merlin
+ # Port pair 4Eh/4Fh
+ device pnp 4e.00 on end # IO Interface
+ device pnp 4e.01 off end # Com 1
+ device pnp 4e.02 off end # Com 2
+ device pnp 4e.04 off end # System Wake-Up
+ device pnp 4e.05 off end # PS/2 Mouse
+ device pnp 4e.06 on # PS/2 Keyboard
+ io 0x60 = 0x0060
+ io 0x62 = 0x0064
+ irq 0x70 = 1
+ end
+ device pnp 4e.0a off end # Consumer IR
+ device pnp 4e.0f off end # Shared Memory/Flash Interface
+ device pnp 4e.10 off end # RTC-like Timer
+ device pnp 4e.11 off end # Power Management Channel 1
+ device pnp 4e.12 off end # Power Management Channel 2
+ device pnp 4e.13 off end # Serial Peripheral Interface
+ device pnp 4e.14 off end # Platform EC Interface
+ device pnp 4e.17 off end # Power Management Channel 3
+ device pnp 4e.18 off end # Power Management Channel 4
+ device pnp 4e.19 off end # Power Management Channel 5
+ end
+ end
+ device ref pmc hidden
+ chip drivers/intel/pmc_mux
+ device generic 0 on
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port1 as usb2_port
+ use tcss_usb3_port1 as usb3_port
+ device generic 0 alias conn0 on end
+ end
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port2 as usb2_port
+ use tcss_usb3_port2 as usb3_port
+ device generic 1 alias conn1 on end
+ end
+ end
+ end
+ end
+ device ref hda on
+ subsystemid 0x10ec 0x1200
+ register "pch_hda_sdi_enable[0]" = "1"
+ register "pch_hda_audio_link_hda_enable" = "1"
+ register "pch_hda_idisp_codec_enable" = "1"
+ register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ"
+ register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T"
+ end
+ device ref smbus on end
+ end
+end