summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/siemens')
-rw-r--r--src/mainboard/siemens/mc_apl1/mainboard.c83
1 files changed, 82 insertions, 1 deletions
diff --git a/src/mainboard/siemens/mc_apl1/mainboard.c b/src/mainboard/siemens/mc_apl1/mainboard.c
index fd19cd13ae..18cb660ea1 100644
--- a/src/mainboard/siemens/mc_apl1/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/mainboard.c
@@ -15,14 +15,17 @@
*/
#include <console/console.h>
+#include <delay.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <gpio.h>
#include <hwilib.h>
#include <i210.h>
+#include <intelblocks/cpulib.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
+#include <intelblocks/systemagent.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <string.h>
@@ -35,6 +38,11 @@
#define MAX_PATH_DEPTH 12
#define MAX_NUM_MAPPINGS 10
+#define BIOS_MAILBOX_WAIT_MAX_MS 1000
+#define BIOS_MAILBOX_DATA 0x7080
+#define BIOS_MAILBOX_INTERFACE 0x7084
+#define RUN_BUSY_STS (1 << 31)
+
/** \brief This function can decide if a given MAC address is valid or not.
* Currently, addresses filled with 0xff or 0x00 are not valid.
* @param mac Buffer to the MAC address to check
@@ -110,6 +118,77 @@ enum cb_err mainboard_get_mac_address(struct device *dev, uint8_t mac[6])
return CB_ERR;
}
+/** \brief This function fixes an accuracy issue with IDT PMIC.
+ * The current reported system power consumption is higher than the
+ * actual consumption. With a correction of slope and offset for Vcc
+ * and Vnn, the issue is solved.
+ */
+static void config_pmic_imon(void)
+{
+ struct stopwatch sw;
+ uint32_t power_max;
+
+ printk(BIOS_DEBUG, "PMIC: Configure PMIC IMON - Start\n");
+
+ /* Calculate CPU TDP in mW */
+ power_max = cpu_get_power_max();
+ printk(BIOS_INFO, "PMIC: CPU TDP %d mW.\n", power_max);
+
+ /*
+ * Fix Vnn slope and offset value.
+ * slope = 0x4a4 # 2.32
+ * offset = 0xfa0d # -2.975
+ */
+ stopwatch_init_msecs_expire(&sw, BIOS_MAILBOX_WAIT_MAX_MS);
+ /* Read P_CR_BIOS_MAILBOX_INTERFACE_0_0_0_MCHBAR and check RUN_BUSY. */
+ while ((MCHBAR32(BIOS_MAILBOX_INTERFACE) & RUN_BUSY_STS)) {
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "PMIC: Power consumption measurement "
+ "setup fails for Vnn.\n");
+ return;
+ }
+ }
+ /* Set Vnn values into P_CR_BIOS_MAILBOX_DATA_0_0_0_MCHBAR. */
+ MCHBAR32(BIOS_MAILBOX_DATA) = 0xfa0d04a4;
+ /* Set command, address and busy bit. */
+ MCHBAR32(BIOS_MAILBOX_INTERFACE) = 0x8000011d;
+ printk(BIOS_DEBUG, "PMIC: Fix Vnn slope and offset value.\n");
+
+ /*
+ * Fix Vcc slope and offset value.
+ * Premium and High SKU:
+ * slope = 0x466 # 2.2
+ * offset = 0xe833 # -11.9
+ * Low and Intermediate SKU:
+ * slope = 0x3b3 # 1.85
+ * offset = 0xed33 # -9.4
+ */
+ stopwatch_init_msecs_expire(&sw, BIOS_MAILBOX_WAIT_MAX_MS);
+ while ((MCHBAR32(BIOS_MAILBOX_INTERFACE) & RUN_BUSY_STS)) {
+ if (stopwatch_expired(&sw)) {
+ printk(BIOS_ERR, "PMIC: Power consumption measurement "
+ "setup fails for Vcc.\n");
+ return;
+ }
+ }
+
+ /*
+ * CPU TDP limit between Premium/High and Low/Intermediate SKU
+ * is 9010 mW.
+ */
+ if (power_max > 9010) {
+ MCHBAR32(BIOS_MAILBOX_DATA) = 0xe8330466;
+ MCHBAR32(BIOS_MAILBOX_INTERFACE) = 0x8000001d;
+ printk(BIOS_INFO, "PMIC: Fix Vcc for Premium SKU.\n");
+ } else {
+ MCHBAR32(BIOS_MAILBOX_DATA) = 0xed3303b3;
+ MCHBAR32(BIOS_MAILBOX_INTERFACE) = 0x8000001d;
+ printk(BIOS_INFO, "PMIC: Fix Vcc for Low SKU.\n");
+ }
+
+ printk(BIOS_DEBUG, "PMIC: Configure PMIC IMON - End\n");
+}
+
static void mainboard_init(void *chip_info)
{
const struct pad_config *pads;
@@ -117,6 +196,8 @@ static void mainboard_init(void *chip_info)
pads = brd_gpio_table(&num);
gpio_configure_pads(pads, num);
+
+ config_pmic_imon();
}
static void mainboard_final(void *chip_info)
@@ -125,7 +206,7 @@ static void mainboard_final(void *chip_info)
uint16_t cmd = 0;
device_t dev = NULL;
- /**
+ /*
* Set up the DP2LVDS converter.
* ptn3460_init() may only be executed after i2c bus init.
*/