1 files changed, 141 insertions, 0 deletions
diff --git a/src/mainboard/momentum/apache/Options.lb b/src/mainboard/momentum/apache/Options.lb
new file mode 100644
index 0000000000..3275aa297d
--- /dev/null
+++ b/src/mainboard/momentum/apache/Options.lb
@@ -0,0 +1,141 @@
+##
+## Config file for the Embedded Planet EP405PC Computing Engine
+##
+
+uses PCIC0_CFGADDR 
+uses PCIC0_CFGDATA 
+uses ISA_IO_BASE 
+uses ISA_MEM_BASE 
+uses TTYS0_BASE 
+uses _IO_BASE 
+
+uses CPU_OPT
+uses CROSS_COMPILE 
+uses HAVE_OPTION_TABLE
+uses CONFIG_COMPRESS 
+uses CONFIG_CHIP_CONFIGURE
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_USE_INIT
+uses CONFIG_CONSOLE_SERIAL8250 
+uses TTYS0_BAUD TTYS0_DIV
+uses NO_POST
+uses CONFIG_IDE
+uses CONFIG_FS_STREAM
+uses CONFIG_FS_EXT2
+uses CONFIG_FS_ISO9660
+uses CONFIG_FS_FAT
+uses AUTOBOOT_CMDLINE
+uses CONFIG_SYS_CLK_FREQ
+uses IDE_BOOT_DRIVE
+#uses IDE_SWAB
+uses IDE_OFFSET 
+uses ROM_SIZE
+uses _RESET
+uses _EXCEPTION_VECTORS
+uses _ROMBASE
+uses _ROMSTART
+uses _RAMBASE
+#uses _RAMSTART
+uses EMBEDDED_RAM_SIZE
+uses STACK_SIZE HEAP_SIZE
+
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+
+##
+## Set PCI configuration register addresses
+##
+default PCIC0_CFGADDR=0xeec00000
+default PCIC0_CFGDATA=0xeec00004
+
+##
+## Set PCI/ISA I/O and memory base address
+##
+default ISA_IO_BASE=0xe8000000
+default ISA_MEM_BASE=0x80000000
+default _IO_BASE=ISA_IO_BASE
+
+##
+## HACK ALERT: the UART0 registers are not in the PCI I/O address space
+## but both IDE and UART use the same routines for I/O (inb/outb). To get 
+## around this we set TTYSO_BASE to the difference between the two.
+##
+default TTYS0_BASE=0xef600300-ISA_IO_BASE
+
+## Enable PPC405 instructions
+default CPU_OPT="-mcpu=405"
+#default CPU_OPT=""
+
+## Use stage 1 initialization code
+default CONFIG_USE_INIT=1
+
+## Use chip configuration
+default CONFIG_CHIP_CONFIGURE=1
+
+## We don't use compressed image
+default CONFIG_COMPRESS=0
+
+## Turn off POST codes
+default NO_POST=1
+
+## Enable serial console
+default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_CONSOLE_SERIAL8250=1
+# Divisor of 69 == 9600 baud due to weird clocking
+default TTYS0_DIV=69
+default TTYS0_BAUD=9600
+
+## Boot linux from IDE
+default CONFIG_IDE=1
+default CONFIG_FS_STREAM=1
+default CONFIG_FS_EXT2=1
+default CONFIG_FS_ISO9660=1
+default CONFIG_FS_FAT=1
+default AUTOBOOT_CMDLINE="hda1:/vmlinuz"
+
+default ROM_SIZE=1048576
+
+## Board has fixed size RAM
+default EMBEDDED_RAM_SIZE=64*1024*1024
+
+## LinuxBIOS C code runs at this location in RAM
+default _RAMBASE=0x00100000
+
+##
+## Use a 64K stack
+##
+default STACK_SIZE=0x10000
+
+##
+## Use a 64K heap
+##
+default HEAP_SIZE=0x10000
+
+##
+## System clock
+##
+default CONFIG_SYS_CLK_FREQ=33
+
+##
+default _ROMBASE=0xfff00000
+
+## Reset vector address
+default _RESET=0xfffffffc
+
+## Exception vectors
+default _EXCEPTION_VECTORS=_ROMBASE+0x100
+
+## linuxBIOS ROM start address
+default _ROMSTART=0xfff03000
+
+## linuxBIOS C code runs at this location in RAM
+default _RAMBASE=0x00100000
+
+### End Options.lb
+end