diff options
Diffstat (limited to 'src/mainboard/lippert')
| -rw-r--r-- | src/mainboard/lippert/roadrunner-lx/devicetree.cb | 8 | ||||
| -rw-r--r-- | src/mainboard/lippert/roadrunner-lx/romstage.c | 11 | ||||
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/devicetree.cb | 8 | ||||
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/romstage.c | 11 |
4 files changed, 18 insertions, 20 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/devicetree.cb b/src/mainboard/lippert/roadrunner-lx/devicetree.cb index ea170014dd..eae847999a 100644 --- a/src/mainboard/lippert/roadrunner-lx/devicetree.cb +++ b/src/mainboard/lippert/roadrunner-lx/devicetree.cb @@ -48,8 +48,8 @@ chip northbridge/amd/lx irq 0x70 = 7 end device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME irq 0x70 = 9 end device pnp 2e.5 on # PS/2 keyboard @@ -61,8 +61,8 @@ chip northbridge/amd/lx irq 0x70 = 12 end device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 - # io 0x64 = 0x1200 + io 0x62 = 0x1220 # Simple I/O + # io 0x64 = 0x1228 # SPI end device pnp 2e.8 off # MIDI io 0x60 = 0x300 diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c index 717f51a5ac..7429e4682c 100644 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ b/src/mainboard/lippert/roadrunner-lx/romstage.c @@ -63,16 +63,15 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) static const u16 sio_init_table[] = { // hi=data, lo=index 0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...) - 0x1E2C, // disable ATXPowerGood - will cause a reboot! - 0x0423, // don't delay POWerOK1/2 - 0x9072, // watchdog triggers POWOK, counts seconds + 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal + 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset + 0x9072, // watchdog triggers PWROK, counts seconds #if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disable watchdog by setting timeout to 0 + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) - 0x1E2C, // VIN6=enabled?, FAN4/5 enabled, VIN7=internal, VIN3=enabled - 0x46B8, 0x0CB9, // enable pullups + 0x46B8, 0x0CB9, // enable pullups on RS485_EN 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) 0x26C8, // config GP15,12,11 as output; GP14 as input diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb index 5eeb7fc8c1..1fd2c54941 100644 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb @@ -49,8 +49,8 @@ chip northbridge/amd/lx irq 0x70 = 7 end device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 + io 0x60 = 0x290 # EC + io 0x62 = 0x298 # PME irq 0x70 = 9 end device pnp 2e.5 on # PS/2 keyboard @@ -62,8 +62,8 @@ chip northbridge/amd/lx irq 0x70 = 12 end device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 - io 0x64 = 0x1200 + io 0x62 = 0x1220 # Simple I/O + io 0x64 = 0x1228 # SPI end device pnp 2e.8 off # MIDI io 0x60 = 0x300 diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c index 5c640cb021..66d92b34eb 100644 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ b/src/mainboard/lippert/spacerunner-lx/romstage.c @@ -129,16 +129,15 @@ static int smc_send_config(unsigned char config_data) static const u16 sio_init_table[] = { // hi=data, lo=index 0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...) - 0x1E2C, // disable ATXPowerGood - 0x0423, // don't delay POWerOK1/2 - 0x9072, // watchdog triggers POWOK, counts seconds + 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal + 0x1423, // don't delay PoWeROK1/2 + 0x9072, // watchdog triggers PWROK, counts seconds #if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disable watchdog by setting timeout to 0 + 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) - 0x072C, // VIN6=enabled?, FAN4/5 disabled, VIN7=internal, VIN3=internal - 0x66B8, 0x0CB9, // enable pullups + 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED 0x07C8, // config GP12-10 as output 0x2DF5, // map Hw Monitor Thermal Output to GP55 |