diff options
Diffstat (limited to 'src/mainboard/lippert/toucan-af/platform_cfg.h')
-rw-r--r-- | src/mainboard/lippert/toucan-af/platform_cfg.h | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/src/mainboard/lippert/toucan-af/platform_cfg.h b/src/mainboard/lippert/toucan-af/platform_cfg.h deleted file mode 100644 index b029efb069..0000000000 --- a/src/mainboard/lippert/toucan-af/platform_cfg.h +++ /dev/null @@ -1,229 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - -/** - * @def BIOS_SIZE - * BIOS_SIZE_{1,2,4,8,16}M - * - * In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1) -#endif /* BIOS_SIZE */ - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CONFIG 0x0F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1E - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#define SATA_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_MODE CONFIG_SB800_SATA_MODE - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#define SATA_IDE_MODE IDE_LEGACY_MODE - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#define AZALIA_CONTROLLER AZALIA_AUTO - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#define AZALIA_PIN_CONFIG 1 - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#define AZALIA_SDIN_PIN 0x2A - -/** - * @def GPP_CONTROLLER - */ -#define GPP_CONTROLLER CIMX_OPTION_ENABLED - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#define GPP_CFGMODE GPP_CFGMODE_X1111 - -/** - * @def NB_SB_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define NB_SB_GEN2 TRUE - -/** - * @def SB_GPP_GEN2 - * 0 - Disable - * 1 - Enable - */ -#define SB_GPP_GEN2 TRUE - -/** - * @def SB_GPP_UNHIDE_PORTS - * TRUE - ports visible always, even port empty - * FALSE - ports invisible if port empty - */ -#define SB_GPP_UNHIDE_PORTS FALSE - -/** - * @def GEC_CONFIG - * 0 - Enable - * 1 - Disable - */ -#define GEC_CONFIG 1 - -static const CODECENTRY sample_codec_alc886[] = /* Realtek ALC886/8 */ -{ - /* NID, PinConfig (Verbs 71F..C) */ - {0x11, 0x411111F0}, /* NPC */ - {0x12, 0x411111F0}, /* DMIC */ - {0x14, 0x01214110}, /* FRONT (Port-D) */ - {0x15, 0x01011112}, /* SURR (Port-A) */ - {0x16, 0x01016111}, /* CEN/LFE (Port-G) */ - {0x17, 0x411111F0}, /* SIDESURR (Port-H) */ - {0x18, 0x01A19930}, /* MIC1 (Port-B) */ - {0x19, 0x411111F0}, /* MIC2 (Port-F) */ - {0x1A, 0x0181313F}, /* LINE1 (Port-C) */ - {0x1B, 0x411111F0}, /* LINE2 (Port-E) */ - {0x1C, 0x411111F0}, /* CD-IN */ - {0x1D, 0x40132601}, /* BEEP-IN */ - {0x1E, 0x01441120}, /* S/PDIF-OUT */ - {0x1F, 0x01C46140}, /* S/PDIF-IN */ - {0xff, 0xffffffff} /* end of table */ -}; - -static const CODECTBLLIST codec_tablelist[] = -{ - {0x10ec0888, (CODECENTRY*)&sample_codec_alc886[0]}, - {0xFFFFFFFF, (CODECENTRY*)0xFFFFFFFFL} -}; - -/** - * @def AZALIA_OEM_VERB_TABLE - * Mainboard specific codec verb table list - */ -#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0]) - -#endif |