diff options
Diffstat (limited to 'src/mainboard/lippert/roadrunner-lx/romstage.c')
-rw-r--r-- | src/mainboard/lippert/roadrunner-lx/romstage.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c index d70e2c1835..7e0e2a5e01 100644 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ b/src/mainboard/lippert/roadrunner-lx/romstage.c @@ -52,7 +52,7 @@ int spd_read_byte(unsigned int device, unsigned int address) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal 0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset 0x9072, // watchdog triggers PWROK, counts seconds @@ -60,13 +60,13 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) + 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1) 0x46B8, 0x0CB9, // enable pullups on RS485_EN 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) 0x26C8, // config GP15,12,11 as output; GP14 as input 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) + 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use) }; /* Early mainboard specific GPIO setup. */ |