diff options
Diffstat (limited to 'src/mainboard/lenovo/t60')
| -rw-r--r-- | src/mainboard/lenovo/t60/romstage.c | 46 |
1 files changed, 5 insertions, 41 deletions
diff --git a/src/mainboard/lenovo/t60/romstage.c b/src/mainboard/lenovo/t60/romstage.c index ac78aae841..ab49e6e979 100644 --- a/src/mainboard/lenovo/t60/romstage.c +++ b/src/mainboard/lenovo/t60/romstage.c @@ -76,9 +76,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x7654; RCBA16(D27IR) = 0x0010; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -89,35 +86,6 @@ static void rcba_config(void) RCBA64(IOTR3) = 0x000200f0000c0801ULL; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0; @@ -126,15 +94,13 @@ void mainboard_romstage_entry(void) enable_lapic(); + /* Set up GPIO's early since it is needed for dock init */ + i82801gx_setup_bars(); + setup_pch_gpios(&mainboard_gpio_map); + i82801gx_lpc_setup(); mb_lpc_decode(); - /* We want early GPIO setup, to be able to detect legacy I/O module */ - pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); - /* Enable GPIOs */ - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */, 0x10); - setup_pch_gpios(&mainboard_gpio_map); - dock_err = dlpc_init(); /* We prefer Legacy I/O module over docking */ @@ -156,6 +122,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -168,9 +135,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : 0, spd_addrmap); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ |