diff options
Diffstat (limited to 'src/mainboard/kontron/bsl6/devicetree.cb')
| -rw-r--r-- | src/mainboard/kontron/bsl6/devicetree.cb | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/src/mainboard/kontron/bsl6/devicetree.cb b/src/mainboard/kontron/bsl6/devicetree.cb new file mode 100644 index 0000000000..357f8fa1fa --- /dev/null +++ b/src/mainboard/kontron/bsl6/devicetree.cb @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/intel/skylake + + register "speed_shift_enable" = "1" + + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + register "PmConfigSlpS3MinAssert" = "SLP_S3_MIN_ASSERT_50MS" + register "PmConfigSlpS4MinAssert" = "SLP_S4_MIN_ASSERT_4S" + register "PmConfigSlpSusMinAssert" = "SLP_SUS_MIN_ASSERT_4S" + register "PmConfigSlpAMinAssert" = "SLP_A_MIN_ASSERT_2S" + register "PmConfigPciClockRun" = "1" + register "PmConfigPwrCycDur" = "RESET_POWER_CYCLE_4S" + + # VR Settings Configuration for 2 Domains + #+----------------+-------+-------+ + #| Domain/Setting | VCC | VCCGT | + #+----------------+-------+-------+ + #| Psi1Threshold | 20A | 20A | + #| Psi2Threshold | 5A | 5A | + #| Psi3Threshold | 1A | 1A | + #| Psi3Enable | 1 | 1 | + #| Psi4Enable | 1 | 1 | + #| ImonSlope | 0 | 0 | + #| ImonOffset | 0 | 0 | + #| IccMax | 55A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | + #| AcLoadline | 2.1 | 3.1 | + #| DcLoadline | 2.1 | 3.1 | + #+----------------+-------+-------+ + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(55), + .voltage_limit = 1520, + .ac_loadline = 210, + .dc_loadline = 210, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + # Vendor set Psys Pmax to 30W + register "power_limits_config" = "{ + .psys_pmax = 30, + }" + + # TODO + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 08.0 on end # Gaussian Mixture Model + device pci 14.0 on # USB xHCI + register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" + register "usb2_ports[1]" = "USB2_PORT_LONG(OC0)" + register "usb2_ports[2]" = "USB2_PORT_LONG(OC1)" + register "usb2_ports[3]" = "USB2_PORT_LONG(OC1)" + register "usb2_ports[4]" = "USB2_PORT_LONG(OC2)" # Debug + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on # SATA + register "SataMode" = "KBLFSP_SATA_MODE_AHCI" + register "SataSalpSupport" = "1" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + # SataPortsDevSlp not supported + end + device pci 19.0 off end # UART #2 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on # PCI Express Port 9 (COMe 0) + register "PcieRpEnable[8]" = "1" + end + device pci 1d.1 on # PCI Express Port 10 (COMe 1) + register "PcieRpEnable[9]" = "1" + end + device pci 1d.2 on # PCI Express Port 11 (COMe 2) + register "PcieRpEnable[10]" = "1" + end + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on # LPC Interface + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # EC/kempld at 0xa80/0xa81 + register "gen1_dec" = "0x00000a81" + + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip ec/kontron/kempld + register "uart[0]" = "{ KEMPLD_UART_3F8, 4 }" + device generic 0.0 on end # UART #0 + end + end + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 off end # Intel HDA + device pci 1f.4 on # SMBus + chip drivers/i2c/nct7802y + device i2c 0x2e on end + end + end + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end |