diff options
Diffstat (limited to 'src/mainboard/iwill/dk8_htx')
-rw-r--r-- | src/mainboard/iwill/dk8_htx/Config.lb | 337 | ||||
-rw-r--r-- | src/mainboard/iwill/dk8_htx/Options.lb | 326 |
2 files changed, 0 insertions, 663 deletions
diff --git a/src/mainboard/iwill/dk8_htx/Config.lb b/src/mainboard/iwill/dk8_htx/Config.lb deleted file mode 100644 index c5019183dd..0000000000 --- a/src/mainboard/iwill/dk8_htx/Config.lb +++ /dev/null @@ -1,337 +0,0 @@ -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/failovercalculation.lb - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -#dir /drivers/si/3114 - -#needed by irq_tables and mptable and acpi_tables -object get_bus_conf.o - -if CONFIG_GENERATE_MP_TABLE - object mptable.o -end - -if CONFIG_GENERATE_PIRQ_TABLE - object irq_tables.o -end - -#if CONFIG_GENERATE_ACPI_TABLES -# object acpi_tables.o -# object fadt.o -# if CONFIG_SB_HT_CHAIN_ON_BUS0 -# object dsdt_bus0.o -# else -# object dsdt.o -# end -# object ssdt.o -# if CONFIG_ACPI_SSDTX_NUM -# if CONFIG_SB_HT_CHAIN_ON_BUS0 -# object ssdt2_bus0.o -# else -# object ssdt2.o -# end -# end -#end - -if CONFIG_GENERATE_ACPI_TABLES - object acpi_tables.o - object fadt.o - makerule dsdt.c - depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl" - action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl" - action "mv dsdt_lb.hex dsdt.c" - end - object ./dsdt.o - - #./ssdt.o is moved to northbridge/amd/amdk8/Config.lb - - if CONFIG_ACPI_SSDTX_NUM - makerule ssdt2.c - depends "$(CONFIG_MAINBOARD)/dx/pci2.asl" - action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex" - action "mv pci2.hex ssdt2.c" - end - object ./ssdt2.o - makerule ssdt3.c - depends "$(CONFIG_MAINBOARD)/dx/pci3.asl" - action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex" - action "mv pci3.hex ssdt3.c" - end - object ./ssdt3.o - makerule ssdt4.c - depends "$(CONFIG_MAINBOARD)/dx/pci4.asl" - action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex" - action "mv pci4.hex ssdt4.c" - end - object ./ssdt4.o - makerule ssdt5.c - depends "$(CONFIG_MAINBOARD)/dx/pci5.asl" - action "iasl -p $(CURDIR)/pci5 -tc $(CONFIG_MAINBOARD)/dx/pci5.asl" - action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex" - action "mv pci5.hex ssdt5.c" - end - object ./ssdt5.o - end -end - - if CONFIG_USE_INIT - # compile cache_as_ram.c to auto.o - makerule ./cache_as_ram_auto.o - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - end - - else - #compile cache_as_ram.c to auto.inc - makerule ./cache_as_ram_auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" - end - - end - -if CONFIG_USE_FAILOVER_IMAGE -else - if CONFIG_AP_CODE_IN_CAR - makerule ./apc_auto.o - depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" - end - ldscript /arch/i386/init/ldscript_apc.lb - end -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## - -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end -end - -mainboardinit cpu/x86/32bit/entry32.inc - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end - - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds - else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds - end -end - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - - ## - ## Setup Cache-As-Ram - ## - mainboardinit cpu/amd/car/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_HAVE_FAILOVER_BOOT - if CONFIG_USE_FAILOVER_IMAGE - ldscript /arch/i386/lib/failover_failover.lds - end -else - if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - end -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## - if CONFIG_USE_INIT - initobject cache_as_ram_auto.o - else - mainboardinit ./cache_as_ram_auto.inc - end - -## -## Include the secondary Configuration files -## -config chip.h - -dir /southbridge/amd/amd8132 - -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on end - device pci 1.1 on end - end - chip southbridge/amd/amd8111 - # this "device pci 0.0" is the parent the next one - # PCI bridge - device pci 0.0 on - device pci 0.0 on end - device pci 0.1 on end - device pci 0.2 off end - device pci 1.0 off end - end - device pci 1.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 on # GPIO2 - io 0x07 = 0x08ff - io 0x30 = 0x01ff - io 0x2b = 0xd0ff - io 0xf0 = 0xef16 - end - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end - device pci 1.2 on end - device pci 1.3 on - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # acpi - device pci 1.5 off end - device pci 1.6 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - end - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - - end #pci_domain -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 on end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 off end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# end - -end - - diff --git a/src/mainboard/iwill/dk8_htx/Options.lb b/src/mainboard/iwill/dk8_htx/Options.lb deleted file mode 100644 index f35afb4f81..0000000000 --- a/src/mainboard/iwill/dk8_htx/Options.lb +++ /dev/null @@ -1,326 +0,0 @@ -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_ACPI_RESUME -uses CONFIG_ACPI_SSDTX_NUM -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_USE_FAILOVER_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_FAILOVER_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_LOGICAL_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses CONFIG_FALLBACK_SIZE -uses CONFIG_FAILOVER_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses COREBOOT_EXTRA_VERSION -uses CONFIG_RAMBASE -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_HAVE_INIT_TIMER -uses CONFIG_GDB_STUB -uses CONFIG_GDB_STUB -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses CONFIG_HW_MEM_HOLE_SIZEK -uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC -uses CONFIG_K8_HT_FREQ_1G_SUPPORT - -uses CONFIG_HT_CHAIN_UNITID_BASE -uses CONFIG_HT_CHAIN_END_UNITID_BASE -uses CONFIG_SB_HT_CHAIN_ON_BUS0 -uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE -uses CONFIG_USE_INIT - -uses CONFIG_SERIAL_CPU_INIT - -uses CONFIG_ENABLE_APIC_EXT_ID -uses CONFIG_APIC_ID_OFFSET -uses CONFIG_LIFT_BSP_APIC_ID - -uses CONFIG_PCI_64BIT_PREF_MEM - -uses CONFIG_RAMTOP - -uses CONFIG_AP_CODE_IN_CAR - -uses CONFIG_MEM_TRAIN_SEQ - -uses CONFIG_WAIT_BEFORE_CPUS_INIT - -uses CONFIG_USE_PRINTK_IN_CAR - -### -### Build options -### - -## -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=524288 - -## -## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use -## - -#FALLBACK: 256K-8K -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE -#FAILOVER: 8K -default CONFIG_FAILOVER_SIZE=0x02000 - -#more 1M for pgtbl -default CONFIG_RAMTOP=2048*1024 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 -default CONFIG_HAVE_FAILOVER_BOOT=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=11 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## ACPI tables will be included -default CONFIG_GENERATE_ACPI_TABLES=1 -## extra SSDT num -default CONFIG_ACPI_SSDTX_NUM=3 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_LOGICAL_CPUS=1 - -default CONFIG_SERIAL_CPU_INIT=0 - -default CONFIG_ENABLE_APIC_EXT_ID=0 -default CONFIG_APIC_ID_OFFSET=0x10 -default CONFIG_LIFT_BSP_APIC_ID=1 - -#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. -#2G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 -#1G -#default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 -#512M -default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 - -#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 - -#Opteron K8 1G HT Support -default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 - -#VGA Console -default CONFIG_CONSOLE_VGA=1 -default CONFIG_PCI_ROM_RUN=1 - -#HT Unit ID offset, default is 1, the typical one -default CONFIG_HT_CHAIN_UNITID_BASE=0xa - -#real SB Unit ID, default is 0x20, mean dont touch it at last -default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 - -#make the SB HT chain on bus 0, default is not (0) -default CONFIG_SB_HT_CHAIN_ON_BUS0=2 - -#only offset for SB chain?, default is yes(1) -#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - -#allow capable device use that above 4G -#default CONFIG_PCI_64BIT_PREF_MEM=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_BASE=0xc4000 -default CONFIG_DCACHE_RAM_SIZE=0x0c000 -default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 -default CONFIG_USE_INIT=0 - -## -## for rev F training on AP purpose -## -#default CONFIG_AP_CODE_IN_CAR=1 -#default CONFIG_MEM_TRAIN_SEQ=1 -#default CONFIG_WAIT_BEFORE_CPUS_INIT=1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="dk8_htx" -default CONFIG_MAINBOARD_VENDOR="IWILL" -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 -default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) - -## -## Coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00100000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD = 1 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## -default CONFIG_USE_PRINTK_IN_CAR=1 - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end |