diff options
Diffstat (limited to 'src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb')
| -rw-r--r-- | src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb | 203 |
1 files changed, 198 insertions, 5 deletions
diff --git a/src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb b/src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb index 088b595e93..c0d7864f28 100644 --- a/src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb +++ b/src/mainboard/intel/shadowmountain/variants/baseboard/devicetree.cb @@ -12,6 +12,27 @@ chip soc/intel/alderlake register "pmc_gpe0_dw1" = "GPP_D" register "pmc_gpe0_dw2" = "GPP_E" + # Enable heci communication + register "HeciEnabled" = "1" + + # FSP configuration + register "SaGv" = "SaGv_Disabled" + + # S0ix enable + register "s0ix_enable" = "1" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC1)" # Type-A Port A0 + register "usb2_ports[1]" = "USB2_PORT_MID(OC2)" # Type-A Port A1 + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[3]" = "USB2_PORT_MID(OC0)" # Type-A / Type-C Cl + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera + register "usb2_ports[5]" = "USB2_PORT_MID(OC3)" # Type-A / Type-C Co + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type A port A1 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f register "gen1_dec" = "0x00fc0801" register "gen2_dec" = "0x000c0201" @@ -40,6 +61,123 @@ chip soc/intel/alderlake .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR, }" + # Enable SATA + register "SataEnable" = "1" + register "SataMode" = "0" + register "SataSalpSupport" = "1" + register "SataPortsEnable[0]" = "0" + register "SataPortsEnable[1]" = "1" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[1]" = "1" + register "SataPortsEnableDitoConfig[1]" = "1" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoPci, + [PchSerialIoIndexGSPI1] = PchSerialIoPci, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI3] = PchSerialIoDisabled, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 1, + [PchSerialIoIndexGSPI1] = 1, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 1, + [PchSerialIoIndexGSPI1] = 1, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoPci, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # HD Audio + register "PchHdaDspEnable" = "1" + register "PchHdaAudioLinkHdaEnable" = "0" + register "PchHdaAudioLinkDmicEnable[0]" = "0" + register "PchHdaAudioLinkDmicEnable[1]" = "0" + register "PchHdaAudioLinkSspEnable[0]" = "0" + register "PchHdaAudioLinkSspEnable[1]" = "0" + register "PchHdaAudioLinkSndwEnable[0]" = "0" + register "PchHdaAudioLinkSndwEnable[1]" = "0" + # iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T + register "PchHdaIDispLinkTmode" = "2" + # iDisp-Link Freq 4: 96MHz, 3: 48MHz. + register "PchHdaIDispLinkFrequency" = "4" + # Not disconnected/enumerable + register "PchHdaIDispCodecDisconnect" = "0" + + # DP port + register "DdiPortAConfig" = "1" # eDP + register "DdiPortBConfig" = "0" + + register "DdiPortAHpd" = "1" + register "DdiPortBHpd" = "1" + register "DdiPortCHpd" = "0" + register "DdiPort1Hpd" = "1" + register "DdiPort2Hpd" = "1" + register "DdiPort3Hpd" = "0" + register "DdiPort4Hpd" = "0" + + register "DdiPortADdc" = "0" + register "DdiPortBDdc" = "1" + register "DdiPortCDdc" = "0" + register "DdiPort1Ddc" = "0" + register "DdiPort2Ddc" = "0" + register "DdiPort3Ddc" = "0" + register "DdiPort4Ddc" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| GSPI1 | Fingerprint MCU | + #| I2C0 | SAR0, WWAN, HDMI | + #| I2C1 | Camera | + #| I2C2 | Audio | + #| I2C3 | Touchscreen, USI | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + device domain 0 on device pci 00.0 on end # Host Bridge device pci 02.0 on end # Graphics @@ -74,13 +212,59 @@ chip soc/intel/alderlake device pci 12.6 off end # GSPI2 device pci 13.0 off end # GSPI3 device pci 13.1 off end - device pci 14.0 on end # USB3.1 xHCI + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.9 on end + end + end + end + end # USB3.1 xHCI device pci 14.1 off end # USB3.1 xDCI device pci 14.2 off end # Shared RAM - device pci 14.3 on end # CNVi: WiFi + device pci 14.3 on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end # CNVi: WiFi device pci 15.0 on end # I2C0 device pci 15.1 on end # I2C1 - device pci 15.2 on end # I2C2 + device pci 15.2 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F9)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + register "uid" = "0" + register "desc" = ""Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 31 on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + register "uid" = "1" + register "desc" = ""Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 32 on end + end + end # I2C2 device pci 15.3 on end # I2C3 device pci 16.0 off end # HECI1 device pci 16.1 off end # HECI2 @@ -90,7 +274,16 @@ chip soc/intel/alderlake device pci 16.5 off end # HECI4 device pci 17.0 on end # SATA device pci 19.0 off end # I2C4 - device pci 19.1 on end # I2C5 + device pci 19.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + end # I2C5 device pci 19.2 off end # UART2 device pci 1c.0 off end # RP1 device pci 1c.1 off end # RP2 @@ -114,7 +307,7 @@ chip soc/intel/alderlake end end # eSPI device pci 1f.1 on end # P2SB - device pci 1f.2 hidden end # PMC + device pci 1f.2 hidden end # PMC device pci 1f.3 on end # Intel Audio SNDW device pci 1f.4 on end # SMBus device pci 1f.5 on end # SPI |