summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kunimitsu/acpi
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/intel/kunimitsu/acpi')
-rw-r--r--src/mainboard/intel/kunimitsu/acpi/mainboard.asl40
1 files changed, 39 insertions, 1 deletions
diff --git a/src/mainboard/intel/kunimitsu/acpi/mainboard.asl b/src/mainboard/intel/kunimitsu/acpi/mainboard.asl
index 22f8403094..4f6251b9de 100644
--- a/src/mainboard/intel/kunimitsu/acpi/mainboard.asl
+++ b/src/mainboard/intel/kunimitsu/acpi/mainboard.asl
@@ -143,6 +143,44 @@ Scope (\_SB.PCI0.I2C4)
Name (_HID, "10508825")
Name (_DDN, "NAU88L25 Codec")
Name (_UID, 1)
+ Name (_DSD, Package () {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ /* Enable jack detection via JKDET pin */
+ Package () { "nuvoton,jkdet-enable", 1 },
+ /*
+ * JKDET pin is pulled up by R389 on board.
+ * JKDET pin polarity = active low
+ */
+ Package () { "nuvoton,jkdet-pull-enable", 1 },
+ Package () { "nuvoton,jkdet-pull-up", 1 },
+ Package () { "nuvoton,jkdet-polarity", 1 },
+ /* VDDA(1.8) * 1.53 = 2.754 */
+ Package () { "nuvoton,micbias-voltage", 6 },
+ /* VREF Impedance = 125 kOhm */
+ Package () { "nuvoton,vref-impedance", 2 },
+ /*
+ * Setup 4 buttons impedance according to
+ * Android specification
+ */
+ Package () { "nuvoton,sar-threshold-num", 4 },
+ Package () { "nuvoton,sar-threshold",
+ Package() { 0x0a, 0x14, 0x26, 0x73 } },
+ /*
+ * Coeff 0-15 used to adjust threshold level
+ * 0 for low resist range
+ */
+ Package () { "nuvoton,sar-hysteresis", 0 },
+ /* SAR tracking gain based on 2.754 micbias-voltage */
+ Package () { "nuvoton,sar-voltage", 6 },
+ /* 100ms short key press debounce */
+ Package () { "nuvoton,short-key-debounce", 3 },
+ /* 2^(7+2) = 512 ms insert/eject debounce */
+ Package () { "nuvoton,jack-insert-debounce", 7 },
+ /* debounce not needed for eject normally */
+ Package () { "nuvoton,jack-eject-debounce", 0 },
+ }
+ })
Name (_CRS, ResourceTemplate()
{
@@ -153,7 +191,7 @@ Scope (\_SB.PCI0.I2C4)
AddressingMode7Bit,
"\\_SB.PCI0.I2C4",
)
- Interrupt (ResourceConsumer, Edge, ActiveLow)
+ Interrupt (ResourceConsumer, Level, ActiveLow)
{
BOARD_HP_MIC_CODEC_IRQ
}