diff options
Diffstat (limited to 'src/mainboard/intel/kblrvp/variants')
-rw-r--r-- | src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb | 267 | ||||
-rw-r--r-- | src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h | 221 |
2 files changed, 488 insertions, 0 deletions
diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb new file mode 100644 index 0000000000..e79c046b8f --- /dev/null +++ b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb @@ -0,0 +1,267 @@ +chip soc/intel/skylake + + # SATA port 0 + register "EnableSata" = "1" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + + # Enable deep Sx states + register "deep_s5_enable" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Enable DPTF + register "dptf_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "PmTimerDisabled" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled + register "SerialIrqConfigSirqEnable" = "0x01" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + register "domain_vr_config[VR_RING]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0, \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0 ,\ + .voltage_limit = 0x0 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x0, \ + .voltage_limit = 0x0 \ + }" + + register "FspSkipMpInit" = "1" + + # Enable Root ports. + register "PcieRpEnable[2]" = "1" + register "PcieRpEnable[3]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[8]" = "1" + + # Enable CLKREQ# + register "PcieRpClkReqSupport[2]" = "1" + register "PcieRpClkReqSupport[3]" = "1" + register "PcieRpClkReqSupport[4]" = "1" + register "PcieRpClkReqSupport[5]" = "1" + register "PcieRpClkReqSupport[8]" = "1" + + # RP 9 uses SRCCLKREQ5# + register "PcieRpClkReqNumber[2]" = "5" + register "PcieRpClkReqNumber[3]" = "2" + register "PcieRpClkReqNumber[4]" = "3" + register "PcieRpClkReqNumber[5]" = "4" + register "PcieRpClkReqNumber[8]" = "1" + + + # USB 2.0 Enable all ports + register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port + register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port + register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + + # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ + }" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable/Disable VMX feature + register "VmxEnable" = "0" + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_G5" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 on end # PCI Express Port 3 + device pci 1c.3 on end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 on end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h b/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h new file mode 100644 index 0000000000..7a8314ee4f --- /dev/null +++ b/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h @@ -0,0 +1,221 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 Google Inc. + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _GPIORVP7_H +#define _GPIORVP7_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* TCA6424A I/O Expander */ +#define IO_EXPANDER_BUS 4 +#define IO_EXPANDER_0_ADDR 0x22 +#define IO_EXPANDER_P0CONF 0x0C /* Port 0 conf offset */ +#define IO_EXPANDER_P0DOUT 0x04 /* Port 0 data offset */ +#define IO_EXPANDER_P1CONF 0x0D +#define IO_EXPANDER_P1DOUT 0x05 +#define IO_EXPANDER_P2CONF 0x0E +#define IO_EXPANDER_P2DOUT 0x06 +#define IO_EXPANDER_1_ADDR 0x23 + + +/* GPE_EC_WAKE */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +/* CHROMEEC in RVP */ +#define EC_SCI_GPI GPP_E16 +#define EC_SMI_GPI GPP_E15 +/* + * Gpio based irq for touchpad, 18th index in North Bank + * MAX_DIRECT_IRQ + GPSW_SIZE + 19 + */ +#define KBLRVP_TOUCHPAD_IRQ 33 + +#define KBLRVP_TOUCH_IRQ 31 + +#define BOARD_TOUCHPAD_NAME "touchpad" +#define BOARD_TOUCHPAD_IRQ KBLRVP_TOUCHPAD_IRQ +#define BOARD_TOUCHPAD_I2C_BUS 0 +#define BOARD_TOUCHPAD_I2C_ADDR 0x20 + +#define BOARD_TOUCHSCREEN_NAME "touchscreen" +#define BOARD_TOUCHSCREEN_IRQ KBLRVP_TOUCH_IRQ +#define BOARD_TOUCHSCREEN_I2C_BUS 0 +#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { +/* PM_SLP_S0ix_R_N*/ PAD_CFG_GPO(GPP_A7, 1, DEEP), +/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), +/* PCH_CLK_PCI_TPM */ PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1), +/* PCH_LPC_CLK */ PAD_CFG_GPI_APIC(GPP_A11, NONE, DEEP), +/* ISH_KB_PROX_INT */ PAD_CFG_GPO(GPP_A12, 1, RSMRST), +/* PCH_SUSPWRACB */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), +/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, 20K_PD, DEEP, NF1), +/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), +/* SD_PWR_EN */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), +/* ACCEL INTERRUPT */ PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), +/* ISH_GP1 */ PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1), +/* GYRO_DRDY */ PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1), +/* FLIP_ACCEL_INT */ PAD_CFG_NF(GPP_A21, NONE, DEEP, NF1), +/* GYRO_INT */ PAD_CFG_GPO(GPP_A22, 1, DEEP), +/* ISH_GP5 */ PAD_CFG_GPI_APIC(GPP_A23, NONE, DEEP), +/* CORE_VID0 */ PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), +/* CORE_VID1 */ PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), +/* HSJ_MIC_DET */ PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1), +/* TRACKPAD_INT */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST), +/* BT_RF_KILL */ PAD_CFG_GPO(GPP_B4, 1, DEEP), +/* SRCCLKREQ0# */ PAD_CFG_GPI_APIC(GPP_B5, NONE, DEEP), +/* MPHY_EXT_PWR_GATE */ PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1), +/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), +/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), +/* GPP_B_14_SPKR */ PAD_CFG_TERM_GPO(GPP_B14, 1, 20K_PD, DEEP), +/* WLAN_PCIE_WAKE */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, PLTRST, YES), +/* TBT_CIO_PLUG_EVT */ PAD_CFG_GPI_ACPI_SCI(GPP_B17, 20K_PU, PLTRST, YES), +/* PCH_SLOT1_WAKE_N */ PAD_CFG_GPI_ACPI_SCI(GPP_B18, 20K_PU, PLTRST, YES), +/* CCODEC_SPI_CS */ PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1), +/* CODEC_SPI_CLK */ PAD_CFG_NF(GPP_B20, 20K_PD, DEEP, NF1), +/* CODEC_SPI_MISO */ PAD_CFG_NF(GPP_B21, 20K_PD, DEEP, NF1), +/* CODEC_SPI_MOSI */ PAD_CFG_NF(GPP_B22, 20K_PD, DEEP, NF1), +/* SM1ALERT# */ PAD_CFG_TERM_GPO(GPP_B23, 1, 20K_PD, DEEP), +/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), +/* SMB_DATA */ PAD_CFG_NF(GPP_C1, 20K_PD, DEEP, NF1), +/* SMBALERT# */ PAD_CFG_TERM_GPO(GPP_C2, 1, 20K_PD, DEEP), +/* M2_WWAN_PWREN */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), +/* SML0DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), +/* SML0ALERT# */ PAD_CFG_GPI_APIC(GPP_C5, 20K_PD, DEEP), +/* EC_IN_RW */ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1), +/* USB_CTL */ PAD_CFG_NF(GPP_C7, 20K_PD, DEEP, NF1), +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +/* NFC_RST* */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1), +/* EN_PP3300_KEPLER */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1), +/* PCH_MEM_CFG0 */ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), +/* PCH_MEM_CFG1 */ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), +/* PCH_MEM_CFG2 */ PAD_CFG_NF(GPP_C14, NONE, DEEP, NF1), +/* PCH_MEM_CFG3 */ PAD_CFG_NF(GPP_C15, NONE, DEEP, NF1), +/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), +/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), +/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), +/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), +/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), +/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), +/* TCH_PNL_PWREN */ PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1), +/* SPI_WP_STATUS */ PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1), +/* ITCH_SPI_CS */ PAD_CFG_NF(GPP_D0, NONE, DEEP, NF1), +/* ITCH_SPI_CLK */ PAD_CFG_NF(GPP_D1, NONE, DEEP, NF1), +/* ITCH_SPI_MISO_1 */ PAD_CFG_NF(GPP_D2, NONE, DEEP, NF1), +/* ITCH_SPI_MISO_0 */ PAD_CFG_NF(GPP_D3, NONE, DEEP, NF1), +/* CAM_FLASH_STROBE */ PAD_CFG_NF(GPP_D4, NONE, DEEP, NF1), +/* EN_PP3300_DX_EMMC */ PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), +/* EN_PP1800_DX_EMMC */ PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), +/* SH_I2C1_SDA */ PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), +/* SH_I2C1_SCL */ PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_D9, NONE, DEEP), +/* SD_D3_WAKE */ PAD_CFG_GPI(GPP_D10, NONE, DEEP), +/* USB_A1_ILIM_SEL */ PAD_CFG_GPI(GPP_D11, NONE, DEEP), +/* EN_PP3300_DX_CAM */ PAD_CFG_GPI(GPP_D12, NONE, DEEP), +/* EN_PP1800_DX_AUDIO */PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1), +/* ISH_UART0_TXD */ PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1), +/* ISH_UART0_RTS */ PAD_CFG_NF(GPP_D15, NONE, DEEP, NF1), +/* ISH_UART0_CTS */ PAD_CFG_NF(GPP_D16, NONE, DEEP, NF1), +/* DMIC_CLK_1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), +/* DMIC_DATA_1 */ PAD_CFG_NF(GPP_D18, 20K_PD, DEEP, NF1), +/* DMIC_CLK_0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1), +/* DMIC_DATA_0 */ PAD_CFG_NF(GPP_D20, 20K_PD, DEEP, NF1), +/* ITCH_SPI_D2 */ PAD_CFG_NF(GPP_D21, NONE, DEEP, NF1), +/* ITCH_SPI_D3 */ PAD_CFG_NF(GPP_D22, NONE, DEEP, NF1), +/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1), +/* SPI_TPM_IRQ */ PAD_CFG_GPI_APIC(GPP_E0, 20K_PD, DEEP), +/* SATAXPCIE1 */ PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1), +/* SSD_PEDET */ PAD_CFG_GPI(GPP_E2, NONE, DEEP), +/* CPU_GP0 */ PAD_CFG_GPO(GPP_E3, 1, RSMRST), +/* SATA_DEVSLP1 */ PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), +/* SATA_DEVSLP2 */ PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), +/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), +/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), +/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), +/* DDI1_HPD */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), +/* DDI2_HPD */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), +/* EC_SMI */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), +/* EC_SCI */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, PLTRST, YES), +/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), +/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1), +/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, 20K_PD, DEEP, NF1), +/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1), +/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), +/* PCH_CODEC_IRQ */ PAD_CFG_GPI_APIC(GPP_E22, NONE, DEEP), +/* TCH_PNL_RST */ PAD_CFG_TERM_GPO(GPP_E23, 1, 20K_PD, DEEP), +/* I2S2_SCLK */ PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), +/* I2S2_SFRM */ PAD_CFG_NF(GPP_F1, NONE, DEEP, NF1), +/* I2S2_TXD */ PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1), +/* I2S2_RXD */ PAD_CFG_NF(GPP_F3, NONE, DEEP, NF1), +/* I2C2_SDA */ PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1), +/* I2C2_SCL */ PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1), +/* I2C3_SDA */ PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), +/* I2C3_SCL */ PAD_CFG_NF(GPP_F7, NONE, DEEP, NF1), +/* I2C4_SDA */ PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1), +/* I2C4_SDA */ PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1), +/* AUDIO_IRQ */ PAD_CFG_NF(GPP_F10, NONE, DEEP, NF2), +/* I2C5_SCL */ PAD_CFG_NF(GPP_F11, NONE, DEEP, NF2), +/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1), +/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1), +/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1), +/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), +/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), +/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), +/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1), +/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), +/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), +/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), +/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1), +/* WWAN_UIM_SIM_DET */ PAD_CFG_GPI_APIC(GPP_F23, NONE, DEEP), +/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), +/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), +/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), +/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), +/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), +/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), +/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), +/* SD_WP */ PAD_CFG_NF(GPP_G7, NONE, DEEP, NF1), +/* PCH_BATLOW */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1), +/* EC_PCH_ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1), +/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1), +/* EC_PCH_PWRBTN */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1), +/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1), +/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1), +/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1), + PAD_CFG_NF(GPD7, NONE, DEEP, NF1), +/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1), +/* PCH_SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, DEEP, NF1), +/* PM_SLP_S5# */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1), +/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1), +}; + +/* Early pad configuration in romstage. */ +static const struct pad_config early_gpio_table[] = { +/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), +/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), +}; + + +#endif + +#endif + |