diff options
Diffstat (limited to 'src/mainboard/intel/jarrell')
| -rw-r--r-- | src/mainboard/intel/jarrell/Kconfig | 39 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/board_info.txt | 3 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/cmos.layout | 80 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/debug.c | 262 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/devicetree.cb | 80 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/irq_tables.c | 42 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/jarrell_fixups.c | 116 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/mptable.c | 238 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/power_reset_check.c | 22 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/romstage.c | 110 | ||||
| -rw-r--r-- | src/mainboard/intel/jarrell/watchdog.c | 139 |
11 files changed, 0 insertions, 1131 deletions
diff --git a/src/mainboard/intel/jarrell/Kconfig b/src/mainboard/intel/jarrell/Kconfig deleted file mode 100644 index 6ecbc870f1..0000000000 --- a/src/mainboard/intel/jarrell/Kconfig +++ /dev/null @@ -1,39 +0,0 @@ -if BOARD_INTEL_JARRELL - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA604 - select NORTHBRIDGE_INTEL_E7520 - select SOUTHBRIDGE_INTEL_PXHD - select SOUTHBRIDGE_INTEL_I82801EX - select SUPERIO_NSC_PC87427 - select ROMCC - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select UDELAY_TSC - select USE_WATCHDOG_ON_BOOT - select DRIVERS_ATI_RAGEXL - select BOARD_ROMSIZE_KB_2048 - -config MAINBOARD_DIR - string - default intel/jarrell - -config MAINBOARD_PART_NUMBER - string - default "Jarrell" - -config MAX_CPUS - int - default 4 - -config IRQ_SLOT_COUNT - int - default 18 - -config DIMM_MAP_LOGICAL - hex - default 0x0124 - -endif # BOARD_INTEL_JARRELL diff --git a/src/mainboard/intel/jarrell/board_info.txt b/src/mainboard/intel/jarrell/board_info.txt deleted file mode 100644 index e62a179078..0000000000 --- a/src/mainboard/intel/jarrell/board_info.txt +++ /dev/null @@ -1,3 +0,0 @@ -Board name: Jarrell (SE7520JR2) -Category: server -Board URL: http://www.intel.com/support/motherboards/server/se7520jr2/ diff --git a/src/mainboard/intel/jarrell/cmos.layout b/src/mainboard/intel/jarrell/cmos.layout deleted file mode 100644 index 16c2ba447a..0000000000 --- a/src/mainboard/intel/jarrell/cmos.layout +++ /dev/null @@ -1,80 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 376 r 0 reserved_memory -376 1 e 1 power_up_watchdog -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 2 hyper_threading -397 1 e 1 pxhd_bus_speed_100 -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/intel/jarrell/debug.c b/src/mainboard/intel/jarrell/debug.c deleted file mode 100644 index b92a75d76c..0000000000 --- a/src/mainboard/intel/jarrell/debug.c +++ /dev/null @@ -1,262 +0,0 @@ -#include <spd.h> - -static void print_reg(unsigned char index) -{ - unsigned char data; - - outb(index, 0x2e); - data = inb(0x2f); - print_debug("0x"); - print_debug_hex8(index); - print_debug(": 0x"); - print_debug_hex8(data); - print_debug("\n"); - return; -} - -static void xbus_en(void) -{ - /* select the XBUS function in the SIO */ - outb(0x07, 0x2e); - outb(0x0f, 0x2f); - outb(0x30, 0x2e); - outb(0x01, 0x2f); - return; -} - -static void setup_func(unsigned char func) -{ - /* select the function in the SIO */ - outb(0x07, 0x2e); - outb(func, 0x2f); - /* print out the regs */ - print_reg(0x30); - print_reg(0x60); - print_reg(0x61); - print_reg(0x62); - print_reg(0x63); - print_reg(0x70); - print_reg(0x71); - print_reg(0x74); - print_reg(0x75); - return; -} - -static void siodump(void) -{ - int i; - unsigned char data; - - print_debug("\n*** SERVER I/O REGISTERS ***\n"); - for (i=0x10; i<=0x2d; i++) { - print_reg((unsigned char)i); - } -#if 0 - print_debug("\n*** XBUS REGISTERS ***\n"); - setup_func(0x0f); - for (i=0xf0; i<=0xff; i++) { - print_reg((unsigned char)i); - } - - print_debug("\n*** SERIAL 1 CONFIG REGISTERS ***\n"); - setup_func(0x03); - print_reg(0xf0); - - print_debug("\n*** SERIAL 2 CONFIG REGISTERS ***\n"); - setup_func(0x02); - print_reg(0xf0); - -#endif - print_debug("\n*** GPIO REGISTERS ***\n"); - setup_func(0x07); - for (i=0xf0; i<=0xf8; i++) { - print_reg((unsigned char)i); - } - print_debug("\n*** GPIO VALUES ***\n"); - data = inb(0x68a); - print_debug("\nGPDO 4: 0x"); - print_debug_hex8(data); - data = inb(0x68b); - print_debug("\nGPDI 4: 0x"); - print_debug_hex8(data); - print_debug("\n"); - -#if 0 - - print_debug("\n*** WATCHDOG TIMER REGISTERS ***\n"); - setup_func(0x0a); - print_reg(0xf0); - - print_debug("\n*** FAN CONTROL REGISTERS ***\n"); - setup_func(0x09); - print_reg(0xf0); - print_reg(0xf1); - - print_debug("\n*** RTC REGISTERS ***\n"); - setup_func(0x10); - print_reg(0xf0); - print_reg(0xf1); - print_reg(0xf3); - print_reg(0xf6); - print_reg(0xf7); - print_reg(0xfe); - print_reg(0xff); - - print_debug("\n*** HEALTH MONITORING & CONTROL REGISTERS ***\n"); - setup_func(0x14); - print_reg(0xf0); -#endif - return; -} - -static void dump_bar14(unsigned dev) -{ - int i; - unsigned long bar; - - print_debug("BAR 14 Dump\n"); - - bar = pci_read_config32(dev, 0x14); - for(i = 0; i <= 0x300; i+=4) { -#if 0 - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); -#endif - if((i%4)==0) { - print_debug("\n"); - print_debug_hex16(i); - print_debug_char(' '); - } - print_debug_hex32(read32(bar + i)); - print_debug_char(' '); - } - print_debug("\n"); -} - -#if 0 -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - } -} -#endif - -void dump_spd_registers(void) -{ - unsigned device; - device = DIMM0; - while(device <= DIMM7) { - int status = 0; - int i; - print_debug("\n"); - print_debug("dimm "); - print_debug_hex8(device); - - for(i = 0; (i < 256) ; i++) { - unsigned char byte; - if ((i % 16) == 0) { - print_debug("\n"); - print_debug_hex8(i); - print_debug(": "); - } - status = smbus_read_byte(device, i); - if (status < 0) { - print_debug("bad device: "); - print_debug_hex8(-status); - print_debug("\n"); - break; - } - print_debug_hex8(status); - print_debug_char(' '); - } - device++; - print_debug("\n"); - } -} - -void dump_ipmi_registers(void) -{ - unsigned device; - device = 0x42; - while(device <= 0x42) { - int status = 0; - int i; - print_debug("\n"); - print_debug("ipmi "); - print_debug_hex8(device); - - for(i = 0; (i < 8) ; i++) { - unsigned char byte; - status = smbus_read_byte(device, 2); - if (status < 0) { - print_debug("bad device: "); - print_debug_hex8(-status); - print_debug("\n"); - break; - } - print_debug_hex8(status); - print_debug_char(' '); - } - device++; - print_debug("\n"); - } -} diff --git a/src/mainboard/intel/jarrell/devicetree.cb b/src/mainboard/intel/jarrell/devicetree.cb deleted file mode 100644 index 501bc7ed45..0000000000 --- a/src/mainboard/intel/jarrell/devicetree.cb +++ /dev/null @@ -1,80 +0,0 @@ -chip northbridge/intel/e7520 - device domain 0 on - subsystemid 0x8086 0x1079 inherit - device pci 00.0 on end - device pci 00.1 on end - device pci 01.0 on end - device pci 02.0 on - chip southbridge/intel/pxhd # pxhd1 - device pci 00.0 on end - device pci 00.1 on end - device pci 00.2 on - chip drivers/generic/generic - device pci 04.0 on end - device pci 04.1 on end - end - end - device pci 00.3 on end - end - end - device pci 06.0 on end - chip southbridge/intel/i82801ex # i82801er - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.2 on end - device pci 1d.3 off end - device pci 1d.7 on end - device pci 1e.0 on - chip drivers/ati/ragexl - device pci 0c.0 on end - end - end - device pci 1f.0 on - chip superio/nsc/pc87427 - device pnp 2e.0 off end - device pnp 2e.2 on -# io 0x60 = 0x2f8 -# irq 0x70 = 3 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on -# io 0x60 = 0x3f8 -# irq 0x70 = 4 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 on - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a off end - device pnp 2e.f on end - device pnp 2e.10 off end - device pnp 2e.14 off end - end - end - device pci 1f.1 on end - device pci 1f.2 off end - device pci 1f.3 on end - device pci 1f.5 off end - device pci 1f.6 off end - register "gpio[40]" = "ICH5R_GPIO_USE_AS_GPIO" - register "gpio[48]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_OUTPUT | ICH5R_GPIO_LVL_LOW" - register "gpio[41]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_INPUT" - end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 # cpu 0 - device lapic 0 on end - end - chip cpu/intel/socket_mPGA604 # cpu 1 - device lapic 6 on end - end - end -end diff --git a/src/mainboard/intel/jarrell/irq_tables.c b/src/mainboard/intel/jarrell/irq_tables.c deleted file mode 100644 index fdeae8cd09..0000000000 --- a/src/mainboard/intel/jarrell/irq_tables.c +++ /dev/null @@ -1,42 +0,0 @@ -/* PCI: Interrupt Routing Table found at 0x40114180 size = 320 */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - 0x52495024, /* u32 signature */ - 0x0100, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* u16 Table size 32+(16*devices) */ - 0x00, /* u8 Bus 0 */ - 0xf8, /* u8 Device 1, Function 0 */ - 0x0000, /* u16 reserve IRQ for PCI */ - 0x8086, /* u16 Vendor */ - 0x24d0, /* Device ID */ - 0x00000000, /* u32 miniport_data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x38, /* u8 checksum - mod 256 checksum must give zero */ - { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, 0x08, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - {0x00, 0xf8, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - {0x00, 0xe8, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x6b, 0xdcf8}}, 0x00, 0x00}, - {0x02, 0x20, {{0x62, 0xdc78}, {0x63, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - {0x03, 0x28, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - {0x04, 0x60, {{0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00}, - {0x02, 0x08, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}}, 0x04, 0x00}, - {0x02, 0x10, {{0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}, {0x60, 0xdcf8}}, 0x05, 0x00}, - {0x02, 0x18, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0xdcf8}}, 0x06, 0x00}, - {0x03, 0x08, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}}, 0x01, 0x00}, - {0x03, 0x10, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x61, 0xdcf8}}, 0x02, 0x00}, - {0x03, 0x18, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}}, 0x03, 0x00}, - {0x00, 0x10, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}, - {0x00, 0x18, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}, - {0x00, 0x20, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}, - {0x00, 0x28, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}, - {0x00, 0x30, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}, - {0x00, 0x38, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00} - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/intel/jarrell/jarrell_fixups.c b/src/mainboard/intel/jarrell/jarrell_fixups.c deleted file mode 100644 index 90e3ff1613..0000000000 --- a/src/mainboard/intel/jarrell/jarrell_fixups.c +++ /dev/null @@ -1,116 +0,0 @@ -#include <arch/io.h> - -static void mch_reset(void) -{ - device_t dev; - unsigned long value, base; - dev = pci_locate_device_on_bus(PCI_ID(0x8086, 0x24d0), 0); - if (dev != PCI_DEV_INVALID) { - /* I/O space is always enables */ - - /* Set gpio base */ - pci_write_config32(dev, 0x58, ICH5_GPIOBASE | 1); - base = ICH5_GPIOBASE; - - /* Enable GPIO Bar */ - value = pci_read_config32(dev, 0x5c); - value |= 0x10; - pci_write_config32(dev, 0x5c, value); - - /* Set GPIO 19 mux to IO usage */ - value = inl(base); - value |= (1 <<19); - outl(value, base); - - /* Pull GPIO 19 low */ - value = inl(base + 0x0c); - value &= ~(1 << 19); - outl(value, base + 0x0c); - } - return; -} - -static void mainboard_set_e7520_pll(unsigned bits) -{ - uint16_t gpio_index; - uint8_t data; - device_t dev; - - /* currently only handle the Jarrell/PC87427 case */ - dev = PC87427_GPIO_DEV; - - - pnp_set_logical_device(dev); - gpio_index = pnp_read_iobase(dev, 0x60); - - /* select SIO GPIO port 4, pin 2 */ - pnp_write_config(dev, PC87427_GPSEL, ((pnp_read_config(dev, PC87427_GPSEL) & 0x88) | 0x42)); - /* set to push-pull, enable output */ - pnp_write_config(dev, PC87427_GPCFG1, 0x03); - - /* select SIO GPIO port 4, pin 4 */ - pnp_write_config(dev, PC87427_GPSEL, ((pnp_read_config(dev, PC87427_GPSEL) & 0x88) | 0x44)); - /* set to push-pull, enable output */ - pnp_write_config(dev, PC87427_GPCFG1, 0x03); - - /* set gpio 42,44 signal levels */ - data = inb(gpio_index + PC87427_GPDO_4); - if ((data & 0x14) == (0xff & (((bits&2)?0:1)<<4 | ((bits&1)?0:1)<<2))) { - print_debug("set_pllsel: correct settings detected!\n"); - return; /* settings already configured */ - } else { - outb((data & 0xeb) | ((bits&2)?0:1)<<4 | ((bits&1)?0:1)<<2, gpio_index + PC87427_GPDO_4); - /* reset */ - print_debug("set_pllsel: settings adjusted, now resetting...\n"); - // hard_reset(); /* should activate a PCI_RST, which should reset MCH, but it doesn't seem to work ???? */ - // mch_reset(); - full_reset(); - } - return; -} - -static void mainboard_set_e7520_leds(void) -{ - uint8_t cnt; - uint8_t data; - device_t dev; - - /* currently only handle the Jarrell/PC87427 case */ - dev = PC87427_GPIO_DEV; - - pnp_set_logical_device(dev); - - /* enable */ - outb(0x30, 0x2e); - outb(0x01, 0x2f); - outb(0x2d, 0x2e); - outb(0x01, 0x2f); - - /* Set auto mode for dimm leds and post */ - outb(0xf0,0x2e); - outb(0x70,0x2f); - outb(0xf4,0x2e); - outb(0x30,0x2f); - outb(0xf5,0x2e); - outb(0x88,0x2f); - outb(0xf6,0x2e); - outb(0x00,0x2f); - outb(0xf7,0x2e); - outb(0x90,0x2f); - outb(0xf8,0x2e); - outb(0x00,0x2f); - - /* Turn the leds off */ - outb(0x00,0x88); - outb(0x00,0x90); - - /* Disable the ports */ - outb(0xf5,0x2e); - outb(0x00,0x2f); - outb(0xf7,0x2e); - outb(0x00,0x2f); - outb(0xf4,0x2e); - outb(0x00,0x2f); - - return; -} diff --git a/src/mainboard/intel/jarrell/mptable.c b/src/mainboard/intel/jarrell/mptable.c deleted file mode 100644 index 21664ceb42..0000000000 --- a/src/mainboard/intel/jarrell/mptable.c +++ /dev/null @@ -1,238 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_pxhd_1; - unsigned char bus_pxhd_2; - unsigned char bus_pxhd_3 = 0; - unsigned char bus_pxhd_4 = 0; - unsigned char bus_pxhd_x = 0; - unsigned char bus_ich5r_1; - unsigned int bus_pxhd_id; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* ich5r */ - dev = dev_find_slot(0, PCI_DEVFN(0x1e,0)); - if (dev) { - bus_ich5r_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1f.0, using defaults\n"); - - bus_ich5r_1 = 4; - } - /* pxhd-1 */ - dev = dev_find_slot(1, PCI_DEVFN(0x0,0)); - if (dev) { - bus_pxhd_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n"); - - bus_pxhd_1 = 2; - } - /* pxhd-2 */ - dev = dev_find_slot(1, PCI_DEVFN(0x00,2)); - if (dev) { - bus_pxhd_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_pxhd_2 = 3; - } - /* test for active riser with 2nd pxh device */ - dev = dev_find_slot(0, PCI_DEVFN(0x06,0)); - if (dev) { - bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID); - if(bus_pxhd_id == 0x35998086) { - bus_pxhd_x = pci_read_config8(dev, PCI_SECONDARY_BUS); - /* pxhd-3 */ - dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x0,0)); - if (dev) { - bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID); - if(bus_pxhd_id == 0x03298086) { - bus_pxhd_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - /* pxhd-4 */ - dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,2)); - if (dev) { - bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID); - if(bus_pxhd_id == 0x032a8086) { - bus_pxhd_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - } - } - } - - mptable_write_buses(mc, NULL, &bus_isa); - - /* IOAPIC handling */ - - smp_write_ioapic(mc, 8, 0x20, IO_APIC_ADDR); - { - struct resource *res; - device_t dev; - /* pxhd apic 3 */ - dev = dev_find_slot(1, PCI_DEVFN(0x00,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x09, 0x20, res->base); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n"); - } - /* pxhd apic 4 */ - dev = dev_find_slot(1, PCI_DEVFN(0x00,3)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x0a, 0x20, res->base); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n"); - } - - /* pxhd apic 5 */ - if(bus_pxhd_3) { /* Active riser pxhd */ - dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,1)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x0b, 0x20, res->base); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.1\n",bus_pxhd_x); - } - } - /* pxhd apic 6 */ - if(bus_pxhd_4) { /* active riser pxhd */ - dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,3)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, 0x0c, 0x20, res->base); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.3\n",bus_pxhd_x); - } - } - } - - mptable_add_isa_interrupts(mc, bus_isa, 0x8, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0a, 0x08, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0b, 0x08, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0a, 0x08, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x07, 0x08, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0b, 0x08, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x05, 0x08, 0x17); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0b, 0x08, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x07, 0x08, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0b, 0x08, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_isa, 0x0a, 0x08, 0x10); - - /* Standard local interrupt assignments */ - mptable_lintsrc(mc, bus_isa); - - /* FIXME verify I have the irqs handled for all of the risers */ - - /* 2:3.0 PCI Slot 1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (3<<2)|0, 0x9, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (3<<2)|1, 0x9, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (3<<2)|2, 0x9, 0x5); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (3<<2)|3, 0x9, 0x4); - - - /* 3:7.0 PCI Slot 2 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (7<<2)|0, 0xa, 0x4); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (7<<2)|1, 0xa, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (7<<2)|2, 0xa, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (7<<2)|3, 0xa, 0x1); - - /* PCI Slot 3 (if active riser) */ - if(bus_pxhd_3) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_3, (1<<2)|0, 0xb, 0x0); - } - - /* PCI Slot 4 (if active riser) */ - if(bus_pxhd_4) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_4, (1<<2)|0, 0xc, 0x0); - } - - /* Onboard SCSI 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (5<<2)|0, 0x9, 0x2); - - /* Onboard SCSI 1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_1, (5<<2)|1, 0x9, 0x1); - - /* Onboard NIC 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (4<<2)|0, 0xa, 0x6); - - /* Onboard NIC 1 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_pxhd_2, (4<<2)|1, 0xa, 0x7); - - /* Onboard VGA */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, - bus_ich5r_1, (12<<2)|0, 0x8, 0x11); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/intel/jarrell/power_reset_check.c b/src/mainboard/intel/jarrell/power_reset_check.c deleted file mode 100644 index 0ac526f0ee..0000000000 --- a/src/mainboard/intel/jarrell/power_reset_check.c +++ /dev/null @@ -1,22 +0,0 @@ -void full_reset(void) -{ - /* Enable power on after power fail... */ - unsigned byte; - byte = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); - byte &= 0xfe; - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, byte); - - outb(0x0e, 0xcf9); -} - -static void power_down_reset_check(void) -{ - uint8_t cmos; - - cmos=cmos_read(RTC_BOOT_BYTE)>>4 ; - print_debug("Boot byte = "); - print_debug_hex8(cmos); - print_debug("\n"); - - if((cmos>2)&&(cmos&1)) full_reset(); -} diff --git a/src/mainboard/intel/jarrell/romstage.c b/src/mainboard/intel/jarrell/romstage.c deleted file mode 100644 index fb4d4834f9..0000000000 --- a/src/mainboard/intel/jarrell/romstage.c +++ /dev/null @@ -1,110 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <stdlib.h> -#include <console/console.h> -#include "southbridge/intel/i82801ex/early_smbus.c" -#include "northbridge/intel/e7520/raminit.h" -#include "superio/nsc/pc87427/pc87427.h" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "watchdog.c" -#include "southbridge/intel/i82801ex/reset.c" -#include "power_reset_check.c" -#include "jarrell_fixups.c" -#include "superio/nsc/pc87427/early_init.c" -#include "northbridge/intel/e7520/memory_initialized.c" -#include "cpu/x86/bist.h" -#include <spd.h> -#include "lib/debug.c" // XXX - -#define SIO_GPIO_BASE 0x680 -#define SIO_XBUS_BASE 0x4880 - -#define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, PC87427_SP2) -#define HIDDEN_SERIAL_DEV PNP_DEV(0x2e, PC87427_SP1) - -#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D6F0) -#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/e7520/raminit.c" -#include "lib/generic_sdram.c" -#include "arch/x86/lib/stages.c" - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - static const struct mem_controller mch[] = { - { - .node_id = 0, - .channel0 = { DIMM2, DIMM1, DIMM0, 0 }, - .channel1 = { DIMM6, DIMM5, DIMM4, 0 }, - } - }; - - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - early_mtrr_init(); - if (memory_initialized()) - skip_romstage(); - } - - /* Setup the console */ - pc87427_disable_dev(CONSOLE_SERIAL_DEV); - pc87427_disable_dev(HIDDEN_SERIAL_DEV); - pc87427_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE); - /* Enable Serial 2 lines instead of GPIO */ - outb(0x2c, 0x2e); - outb((inb(0x2f) & (~1<<1)), 0x2f); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - pc87427_enable_dev(PC87427_GPIO_DEV, SIO_GPIO_BASE); - - pc87427_enable_dev(PC87427_XBUS_DEV, SIO_XBUS_BASE); - xbus_cfg(PC87427_XBUS_DEV); - - /* MOVE ME TO A BETTER LOCATION !!! */ - /* config LPC decode for flash memory access */ - device_t dev; - dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); - if (dev == PCI_DEV_INVALID) - die("Missing ich5?"); - pci_write_config32(dev, 0xe8, 0x00000000); - pci_write_config8(dev, 0xf0, 0x00); - -#if 0 - print_pci_devices(); -#endif - enable_smbus(); -#if 0 -// dump_spd_registers(&cpu[0]); - int i; - for(i = 0; i < 1; i++) - dump_spd_registers(); -#endif - disable_watchdogs(); - power_down_reset_check(); -// dump_ipmi_registers(); - mainboard_set_e7520_leds(); - sdram_initialize(ARRAY_SIZE(mch), mch); - ich5_watchdog_on(); -#if 0 - dump_pci_devices(); - dump_pci_device(PCI_DEV(0, 0x00, 0)); - dump_bar14(PCI_DEV(0, 0x00, 0)); -#endif - /* NOTE: ROMCC dies with an internal compiler error if the - * following line is removed. - */ - print_debug("SDRAM is up.\n"); -} diff --git a/src/mainboard/intel/jarrell/watchdog.c b/src/mainboard/intel/jarrell/watchdog.c deleted file mode 100644 index 7f7a039068..0000000000 --- a/src/mainboard/intel/jarrell/watchdog.c +++ /dev/null @@ -1,139 +0,0 @@ -#include <device/pnp_def.h> -#include <pc80/mc146818rtc.h> - -#define NSC_WD_DEV PNP_DEV(0x2e, 0xa) -#define NSC_WDBASE 0x600 -#define ICH5_WDBASE 0x400 -#define ICH5_GPIOBASE 0x500 - -static void disable_sio_watchdog(device_t dev) -{ - /* FIXME move me somewhere more appropriate */ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 1); - pnp_set_iobase(dev, PNP_IDX_IO0, NSC_WDBASE); - /* disable the sio watchdog */ - outb(0, NSC_WDBASE + 0); - pnp_set_enable(dev, 0); -} - -static void disable_ich5_watchdog(void) -{ - /* FIXME move me somewhere more appropriate */ - device_t dev; - unsigned long value, base; - dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); - if (dev == PCI_DEV_INVALID) { - die("Missing ich5?"); - } - /* Enable I/O space */ - value = pci_read_config16(dev, 0x04); - value |= (1 << 10); - pci_write_config16(dev, 0x04, value); - - /* Set and enable acpibase */ - pci_write_config32(dev, 0x40, ICH5_WDBASE | 1); - pci_write_config8(dev, 0x44, 0x10); - base = ICH5_WDBASE + 0x60; - - /* Set bit 11 in TCO1_CNT */ - value = inw(base + 0x08); - value |= 1 << 11; - outw(value, base + 0x08); - - /* Clear TCO timeout status */ - outw(0x0008, base + 0x04); - outw(0x0002, base + 0x06); -} - -static void disable_jarell_frb3(void) -{ - device_t dev; - unsigned long value, base; - dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); - if (dev == PCI_DEV_INVALID) { - die("Missing ich5?"); - } - /* Enable I/O space */ - value = pci_read_config16(dev, 0x04); - value |= (1 << 0); - pci_write_config16(dev, 0x04, value); - - /* Set gpio base */ - pci_write_config32(dev, 0x58, ICH5_GPIOBASE | 1); - base = ICH5_GPIOBASE; - - /* Enable GPIO Bar */ - value = pci_read_config32(dev, 0x5c); - value |= 0x10; - pci_write_config32(dev, 0x5c, value); - - /* Configure GPIO 48 and 40 as GPIO */ - value = inl(base + 0x30); - value |= (1 << 16) | ( 1 << 8); - outl(value, base + 0x30); - - /* Configure GPIO 48 as Output */ - value = inl(base + 0x34); - value &= ~(1 << 16); - outl(value, base + 0x34); - - /* Toggle GPIO 48 high to low */ - value = inl(base + 0x38); - value |= (1 << 16); - outl(value, base + 0x38); - value &= ~(1 << 16); - outl(value, base + 0x38); - -} - -static void disable_watchdogs(void) -{ - disable_sio_watchdog(NSC_WD_DEV); - disable_ich5_watchdog(); - disable_jarell_frb3(); - print_debug("Watchdogs disabled\n"); -} - -static void ich5_watchdog_on(void) -{ - device_t dev; - unsigned long value, base; - unsigned char byte; - - /* check cmos options */ - byte = cmos_read(RTC_BOOT_BYTE-1); - if(!(byte & 1)) return; /* no boot watchdog */ - byte = cmos_read(RTC_BOOT_BYTE); - if(!(byte & 2)) return; /* fallback so ignore */ - - dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0); - if (dev == PCI_DEV_INVALID) { - die("Missing ich5?"); - } - /* Enable I/O space */ - value = pci_read_config16(dev, 0x04); - value |= (1 << 10); - pci_write_config16(dev, 0x04, value); - - /* Set and enable acpibase */ - pci_write_config32(dev, 0x40, ICH5_WDBASE | 1); - pci_write_config8(dev, 0x44, 0x10); - base = ICH5_WDBASE + 0x60; - - /* Clear TCO timeout status */ - outw(0x0008, base + 0x04); - outw(0x0002, base + 0x06); - - /* set the time value 1 cnt = .6 sec */ - outw(0x0010, base + 0x01); - /* reload the timer with the value */ - outw(0x0001, base + 0x00); - - /* clear bit 11 in TCO1_CNT to start watchdog */ - value = inw(base + 0x08); - value &= ~(1 << 11); - outw(value, base + 0x08); - - print_debug("Watchdog ICH5 enabled\n"); -} |