diff options
Diffstat (limited to 'src/mainboard/intel/elkhartlake_crb/variants')
7 files changed, 464 insertions, 0 deletions
diff --git a/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/ec.h b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/ec.h new file mode 100644 index 0000000000..f05cb7722a --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/ec.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __BASEBOARD_EC_H__ +#define __BASEBOARD_EC_H__ + +#include <ec/ec.h> +#include <ec/google/chromeec/ec_commands.h> +#include <baseboard/gpio.h> + +#define MAINBOARD_EC_SCI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)) + +#define MAINBOARD_EC_SMI_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)) + +/* EC can wake from S5 with lid or power button */ +#define MAINBOARD_EC_S5_WAKE_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON)) + +/* + * EC can wake from S3 with lid or power button or key press or + * mode change event. + */ +#define MAINBOARD_EC_S3_WAKE_EVENTS \ + (MAINBOARD_EC_S5_WAKE_EVENTS |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE)) + +/* Log EC wake events plus EC shutdown events */ +#define MAINBOARD_EC_LOG_EVENTS \ + (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\ + EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC)) + +/* + * ACPI related definitions for ASL code. + */ + +/* Enable EC backed ALS device in ACPI */ +#define EC_ENABLE_ALS_DEVICE + +/* Enable EC backed PD MCU device in ACPI */ +#define EC_ENABLE_PD_MCU_DEVICE + +/* Enable LID switch and provide wake pin for EC */ +#define EC_ENABLE_LID_SWITCH +#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE + +#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */ +#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */ +#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */ + +#endif /* __BASEBOARD_EC_H__ */ diff --git a/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/gpio.h b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/gpio.h new file mode 100644 index 0000000000..de0adf6cff --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/gpio.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __BASEBOARD_GPIO_H__ +#define __BASEBOARD_GPIO_H__ + +#include <soc/gpe.h> +#include <soc/gpio.h> + +/* eSPI virtual wire reporting */ +#define EC_SCI_GPI GPE0_ESPI + +/* EC wake is LAN_WAKE# which is a special DeepSX wake pin */ +#define GPE_EC_WAKE GPE0_LAN_WAK + +#endif /* __BASEBOARD_GPIO_H__ */ diff --git a/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/variants.h b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/variants.h new file mode 100644 index 0000000000..8b6d0bd4ee --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/baseboard/include/baseboard/variants.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __BASEBOARD_VARIANTS_H__ +#define __BASEBOARD_VARIANTS_H__ + +#include <soc/gpio.h> +#include <soc/meminit.h> +#include <stdint.h> +#include <vendorcode/google/chromeos/chromeos.h> + +/* The following 2 functions return the gpio table and fill in the number + * of entries for each table. */ +const struct pad_config *variant_gpio_table(size_t *num); +const struct pad_config *variant_early_gpio_table(size_t *num); +const struct cros_gpio *variant_cros_gpios(size_t *num); + +/* This function returns SPD related FSP-M mainboard configs */ +const struct mb_cfg *variant_memcfg_config(uint8_t board_id); + +#endif /*__BASEBOARD_VARIANTS_H__ */ diff --git a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/Makefile.inc b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/Makefile.inc new file mode 100644 index 0000000000..641e814351 --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/Makefile.inc @@ -0,0 +1,5 @@ +## SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += gpio.c +romstage-y += memory.c +ramstage-y += gpio.c diff --git a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb new file mode 100644 index 0000000000..af0c7530f7 --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb @@ -0,0 +1,304 @@ +chip soc/intel/elkhartlake + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 on + chip drivers/intel/dptf + register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 1000)" + register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 119, SHUTDOWN)" + + register "controls.power_limits.pl1" = "{ + .min_power = 3000, + .max_power = 6000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 200,}" + register "controls.power_limits.pl2" = "{ + .min_power = 20000, + .max_power = 20000, + .time_window_min = 1 * MSECS_PER_SEC, + .time_window_max = 1 * MSECS_PER_SEC, + .granularity = 1000,}" + device generic 0 on end + end + end # SA Thermal device + + device pci 05.0 on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "2" + register "cio2_lanes_used" = "{2,2}" + register "cio2_lane_endpoint[0]" = ""^I2C4.CAM0"" + register "cio2_lane_endpoint[1]" = ""^I2C5.CAM1"" + register "cio2_prt[0]" = "0" + register "cio2_prt[1]" = "2" + device generic 0 on end + end + end + device pci 12.0 off end # Thermal Subsystem + device pci 12.5 off end # UFS SCS + device pci 12.6 off end # GSPI #2 + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 2.0 on end + end + chip drivers/usb/acpi + register "desc" = ""WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.1 on end + end + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 1"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 2"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 3"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB C Connector 4"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + device usb 2.6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 2.7 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Lower"" + register "type" = "UPC_TYPE_A" + device usb 3.0 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3/2 Type-A Left Upper"" + register "type" = "UPC_TYPE_A" + device usb 3.1 on end + end + chip drivers/usb/acpi + register "desc" = ""WLAN"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused1"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused2"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Port Unused3"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.5 on end + end + end + end + end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 off end # PMC SRAM + device pci 14.3 on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end # CNVi wifi + device pci 14.5 on end # SDCard + device pci 15.0 on + chip drivers/i2c/max98373 + register "vmon_slot_no" = "4" + register "imon_slot_no" = "5" + register "uid" = "0" + register "desc" = ""RIGHT SPEAKER AMP"" + register "name" = ""MAXR"" + device i2c 31 on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "6" + register "imon_slot_no" = "7" + register "uid" = "1" + register "desc" = ""LEFT SPEAKER AMP"" + register "name" = ""MAXL"" + device i2c 32 on end + end + chip drivers/i2c/da7219 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H16_IRQ)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end + end # I2C #0 Audio + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 16.5 off end # Management Engine Interface 4 + device pci 17.0 off end # SATA + device pci 19.0 on # I2C #4 Cam 0 + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI2740"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 2740 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "has_power_resource" = "1" + + register "ssdb.lanes_used" = "2" + register "num_freq_entries" = "1" + register "link_freq[0]" = "360000000" + register "remote_name" = ""IPU0"" + + #Controls + register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_3 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D5" #reset + register "gpio_panel.gpio[1].gpio_num" = "GPP_B14" #power + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + + device i2c 10 on end + end + end + device pci 19.1 on # I2C #5 Cam 1 and VCM + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI5675"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM1"" + register "chip_name" = ""Ov 5675 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "ssdb.vcm_type" = "0x0C" + register "vcm_name" = ""VCM0"" + register "num_freq_entries" = "1" + register "link_freq[0]" = "DEFAULT_LINK_FREQ" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_3 + register "clk_panel.clks[0].freq" = "1" #19.2 Mhz + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D4" #power_enable + register "gpio_panel.gpio[1].gpio_num" = "GPP_C19" #reset + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + + device i2c 36 on end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "3" + register "acpi_name" = ""VCM0"" + register "chip_name" = ""DW AF DAC"" + register "device_type" = "INTEL_ACPI_CAMERA_VCM" + + register "pr0" = ""\\_SB.PCI0.I2C5.CAM1.PRIC"" + register "vcm_compat" = ""dongwoon,dw9714"" + + register "ssdb.lanes_used" = "2" + register "num_freq_entries" = "1" + register "link_freq[0]" = "DEFAULT_LINK_FREQ" + register "remote_name" = ""IPU0"" + device i2c 0C on end + end + end + + device pci 19.2 on end # UART #2 + device pci 1a.0 on end # eMMC + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 on end # PCI Express Port 2 - WLAN + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 - NVMe + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_H13_IRQ)" + device spi 0 on end + end + end # GSPI #1 + device pci 1f.0 on end # eSPI Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 hidden end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/gpio.c b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/gpio.c new file mode 100644 index 0000000000..f01202b498 --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/gpio.c @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage*/ +static const struct pad_config gpio_table[] = { + /* ToDo: Fill gpio configurations */ +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* ToDo: Fill early gpio configurations */ +}; + +const struct pad_config *variant_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(gpio_table); + return gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +static const struct cros_gpio cros_gpios[] = { + CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_COMM0_NAME), +}; + +const struct cros_gpio *variant_cros_gpios(size_t *num) +{ + *num = ARRAY_SIZE(cros_gpios); + return cros_gpios; +} diff --git a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/memory.c b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/memory.c new file mode 100644 index 0000000000..e764fdc7f3 --- /dev/null +++ b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/memory.c @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <baseboard/variants.h> +#include <baseboard/gpio.h> +#include <gpio.h> +#include <soc/meminit.h> +#include <soc/romstage.h> + +/* ToDo : Fill EHL related memory configs */ + +const struct mb_cfg *variant_memcfg_config(uint8_t board_id) +{ + /* ToDo : Fill EHL related memory configs */ + + die("unsupported board id : 0x%x\n", board_id); +} |