diff options
Diffstat (limited to 'src/mainboard/intel/d945gclf/Options.lb')
| -rw-r--r-- | src/mainboard/intel/d945gclf/Options.lb | 331 |
1 files changed, 331 insertions, 0 deletions
diff --git a/src/mainboard/intel/d945gclf/Options.lb b/src/mainboard/intel/d945gclf/Options.lb new file mode 100644 index 0000000000..5099529383 --- /dev/null +++ b/src/mainboard/intel/d945gclf/Options.lb @@ -0,0 +1,331 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2008 coresystems GmbH +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +# Tables +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_GENERATE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_HAVE_MAINBOARD_RESOURCES +# SMP +uses CONFIG_SMP +uses CONFIG_LOGICAL_CPUS +uses CONFIG_AP_IN_SIPI_WAIT +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_IOAPIC +# Image Size +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET +# Payload +uses CONFIG_ROM_PAYLOAD +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD +# Build Internals +uses CONFIG_RAMBASE +uses CONFIG_ROMBASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_USE_INIT +uses CONFIG_USE_PRINTK_IN_CAR +uses CONFIG_XIP_ROM_BASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_HAVE_SMI_HANDLER +uses CONFIG_PCIE_CONFIGSPACE_HOLE +uses CONFIG_MMCONF_SUPPORT +uses CONFIG_MMCONF_BASE_ADDRESS +uses CONFIG_GFXUMA + +# +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +# Timers +uses CONFIG_UDELAY_LAPIC +# Console +uses CONFIG_CONSOLE_SERIAL8250 +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_CONSOLE_VGA +uses CONFIG_VGA_ROM_RUN +uses CONFIG_PCI_ROM_RUN +uses CONFIG_DEBUG +# Toolchain +uses CC +uses HOSTCC +uses CONFIG_CROSS_COMPILE +uses CONFIG_OBJCOPY +# Tweaks +uses CONFIG_GDB_STUB +uses CONFIG_MAX_REBOOT_CNT +uses CONFIG_USE_WATCHDOG_ON_BOOT +uses COREBOOT_EXTRA_VERSION +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL + +### +### Build options +### + +## +## +default CONFIG_MAX_REBOOT_CNT=3 + +## +## Use the watchdog to break out of a lockup condition +## +default CONFIG_USE_WATCHDOG_ON_BOOT=0 + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default CONFIG_ROM_SIZE=CONFIG_FALLBACK_SIZE*2 + + +## +## Build code for the fallback boot +## +default CONFIG_HAVE_FALLBACK_BOOT=1 + +## +## Delay timer options +## +default CONFIG_UDELAY_LAPIC=1 + +## +## Build code to reset the motherboard from coreboot +## +default CONFIG_HAVE_HARD_RESET=1 + +## +## Build SMI handler +## +default CONFIG_HAVE_SMI_HANDLER=1 + +## +## Leave a hole for mmapped PCIe config space +## + +default CONFIG_PCIE_CONFIGSPACE_HOLE=1 +default CONFIG_MMCONF_SUPPORT=1 +default CONFIG_MMCONF_BASE_ADDRESS=0xf0000000 + +## +## UMA +## +default CONFIG_GFXUMA=1 + +## +## Build code to export a programmable irq routing table +## +default CONFIG_GENERATE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=18 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default CONFIG_GENERATE_MP_TABLE=1 + +## +## Build code to provide ACPI support +## +default CONFIG_GENERATE_ACPI_TABLES=1 +default CONFIG_HAVE_MAINBOARD_RESOURCES=1 +default CONFIG_HAVE_ACPI_RESUME=1 + +## +## Build code to export a CMOS option table +## +default CONFIG_HAVE_OPTION_TABLE=1 + +## +## Move the default CONFIG_coreboot cmos range off of AMD RTC registers +## +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +# There are some network option roms that don't work with +# coreboot's x86emu. Thus, we only execute the VGA option rom +# for now: +default CONFIG_VGA_ROM_RUN=1 +default CONFIG_PCI_ROM_RUN=0 +default CONFIG_DEBUG=0 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 +default CONFIG_LOGICAL_CPUS=1 +default CONFIG_AP_IN_SIPI_WAIT=1 + +## +## enable CACHE_AS_RAM specifics +## +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_SIZE=0x8000 +default CONFIG_DCACHE_RAM_BASE=0xffed8000 +default CONFIG_USE_PRINTK_IN_CAR=1 + +## +## Execute In Place settings +## + +default CONFIG_XIP_ROM_SIZE = 128 * 1024 +default CONFIG_XIP_ROM_BASE = ( CONFIG_ROMBASE - CONFIG_XIP_ROM_SIZE + CONFIG_ROM_IMAGE_SIZE ) + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default CONFIG_MAINBOARD_PART_NUMBER="D945GCLF" +default CONFIG_MAINBOARD_VENDOR= "INTEL" + +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x464c + +### +### coreboot layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 0xb800 + +## +## Use a small 8K stack +## +default CONFIG_STACK_SIZE=0x2000 + +## +## Use a small 32K heap +## +default CONFIG_HEAP_SIZE=0x8000 + + +### +### Compute the location and size of where this firmware image +### (coreboot plus bootloader) will live in the boot rom chip. +### +default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE + +## +## coreboot C code runs at this location in RAM +## +default CONFIG_RAMBASE=0x00100000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD=1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 + +# Select the serial console base port +default CONFIG_TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default CONFIG_TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=5 +## At a maximum only compile in this level of debugging +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 + +## +## Select power on after power fail setting +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end |