diff options
Diffstat (limited to 'src/mainboard/hp/dl145_g3/irq_tables.c')
-rw-r--r-- | src/mainboard/hp/dl145_g3/irq_tables.c | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/src/mainboard/hp/dl145_g3/irq_tables.c b/src/mainboard/hp/dl145_g3/irq_tables.c new file mode 100644 index 0000000000..27458a109c --- /dev/null +++ b/src/mainboard/hp/dl145_g3/irq_tables.c @@ -0,0 +1,59 @@ +/* This file was generated by getpir.c, do not modify! + * (but if you do, please run checkpir on it to verify) + * + * Contains the IRQ Routing Table dumped directly from your + * memory, which BIOS sets up. + * + * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx + */ + +#ifdef GETPIR +#include "pirq_routing.h" +#else +#include <arch/pirq_routing.h> +#endif + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*15, /* There can be total 19 devices on the bus */ + 0x0, /* Where the interrupt router lies (bus) */ + (0x2<<3)|0x4, + 0, /* IRQs devoted exclusively to PCI usage */ + 0, /* Vendor */ + 0, /* Device */ + 0, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x2a, /* u8 checksum. This has to be set to some + value that would give 0 after the sum of all + bytes for this structure (including checksum) */ + { + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + {0x00,(0x02<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 legacy southbridge + {0x00,(0x03<<3)|0x0, {{0x02, 0x0400}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 usb + {0x00,(0x04<<3)|0x0, {{0x18, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // VGA Contr + {0x00,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom ht1000 pci/pci-x bridge + {0x01,(0x0e<<3)|0x0, {{0x08, 0x00a0}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom BCM5785 [HT1000] SATA + {0x01,(0x0d<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5785 [HT1000] PCI/PCI-X Bridge + //{0x02,(0x01<<3)|0x0, {{0x11, 0x08a8}, {0x12, 0x08a8}, {0x13, 0x08a8}, {0x14, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x06<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x03,(0x00<<3)|0x0, {{0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x08a8}, {0x21, 0x008a8}}, 0x1, 0x0}, + {0x00,(0x07<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x08<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + {0x00,(0x09<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x06,(0x00<<3)|0x0, {{0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x08a8}, {0x24, 0x008a8}}, 0x2, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x2f, 0x08a8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Broadcom HT2100 PCI-Express Bridge + //{0x07,(0x00<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, + {0x08,(0x04<<3)|0x0, {{0x25, 0x08a8}, {0x25, 0x08a8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // BCM5715 Gigabit Ethernet + {0x00,(0x18<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // Host Bridge + //{0x10,(0x01<<3)|0x0, {{0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x8000}, {0x28, 0x08000}}, 0x1, 0x0}, + {0x40,(0x01<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0}, // HTX slot + } +}; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} + |