diff options
Diffstat (limited to 'src/mainboard/google/poppy/variants/atlas')
| -rw-r--r-- | src/mainboard/google/poppy/variants/atlas/devicetree.cb | 2 | ||||
| -rw-r--r-- | src/mainboard/google/poppy/variants/atlas/gpio.c | 57 |
2 files changed, 50 insertions, 9 deletions
diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb index 34bc4d45b7..f58ba8feee 100644 --- a/src/mainboard/google/poppy/variants/atlas/devicetree.cb +++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb @@ -45,7 +45,6 @@ chip soc/intel/skylake register "ScsEmmcEnabled" = "1" register "ScsEmmcHs400Enabled" = "1" register "ScsSdCardEnabled" = "0" - register "IshEnable" = "0" # FIXME: enable once ISH is ready register "PttSwitch" = "0" register "InternalGfx" = "1" register "SkipExtGfxScan" = "1" @@ -255,6 +254,7 @@ chip soc/intel/skylake device domain 0 on device pci 00.0 on end # Host Bridge device pci 02.0 on end # Integrated Graphics Device + device pci 13.0 off end # Integrated Sensor Hub device pci 14.0 on end # USB xHCI device pci 14.1 on end # USB xDCI (OTG) device pci 14.2 on end # Thermal Subsystem diff --git a/src/mainboard/google/poppy/variants/atlas/gpio.c b/src/mainboard/google/poppy/variants/atlas/gpio.c index d99a0e4d82..51dbf69f54 100644 --- a/src/mainboard/google/poppy/variants/atlas/gpio.c +++ b/src/mainboard/google/poppy/variants/atlas/gpio.c @@ -16,6 +16,8 @@ #include <baseboard/gpio.h> #include <baseboard/variants.h> #include <commonlib/helpers.h> +#include <device/device.h> +#include <soc/pci_devs.h> /* Pad configuration in ramstage */ /* Leave eSPI pins untouched from default settings */ @@ -51,10 +53,6 @@ static const struct pad_config gpio_table[] = { PAD_CFG_NC(GPP_A17), /* A18 : ISH_GP0 ==> ISH_GP0 */ PAD_CFG_NC(GPP_A18), - /* A19 : ISH_GP1 ==> TRACKPAD_INT_L */ - PAD_CFG_GPI_APIC(GPP_A19, NONE, PLTRST), - /* A20 : ISH_GP2 ==> ISH_UART0_RXD */ - PAD_CFG_NC(GPP_A20), /* A21 : ISH_GP3 */ PAD_CFG_NC(GPP_A21), /* A22 : ISH_GP4 */ @@ -186,10 +184,6 @@ static const struct pad_config gpio_table[] = { PAD_CFG_NF_1V8(GPP_D11, NONE, DEEP, NF1), /* D12 : ISH_SPI_MOSI ==> ISH_SPI_MOSI */ PAD_CFG_NF_1V8(GPP_D12, NONE, DEEP, NF1), - /* D13 : ISH_UART0_RXD ==> ISH_UART0_RXD */ - PAD_CFG_NF_1V8(GPP_D13, NONE, DEEP, NF1), - /* D14 : ISH_UART0_TXD ==> ISH_UART0_TXD */ - PAD_CFG_NF_1V8(GPP_D14, NONE, DEEP, NF1), /* D15 : ISH_UART0_RTS# ==> NC */ PAD_CFG_NC(GPP_D15), /* D16 : ISH_UART0_CTS# ==> NC */ @@ -388,3 +382,50 @@ const struct pad_config *variant_early_gpio_table(size_t *num) *num = ARRAY_SIZE(early_gpio_table); return early_gpio_table; } + +static const struct pad_config ish_enabled_gpio_table[] = { + /* A19 : ISH_GP1 ==> TRACKPAD_INT_L + * trackpad interrupt to ISH + */ + PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1), + /* A20 : ISH_GP2 ==> ISH_UART0_RXD + * ISH_UART0_RXD signal goes to this ISH GPIO pin. + * It is used as wake up source in ISH firmware. + * Implementation is in ISH firmware also. + */ + PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1), + + /* D13 : ISH_UART0_RXD ==> ISH_UART0_RXD */ + PAD_CFG_NF_1V8(GPP_D13, NONE, DEEP, NF1), + /* D14 : ISH_UART0_TXD ==> ISH_UART0_TXD */ + PAD_CFG_NF_1V8(GPP_D14, NONE, DEEP, NF1), +}; + + +static const struct pad_config ish_disabled_gpio_table[] = { + /* A19 : GPP_A19 ==> TRACKPAD_INT_L + * trackpad interrupt to PCH + */ + PAD_CFG_GPI_APIC(GPP_A19, NONE, PLTRST), + /* A20 : ISH_GP2 ==> NC */ + PAD_CFG_NC(GPP_A20), + + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_CFG_NC(GPP_D13), + /* D14 : ISH_UART0_TXD ==> NC */ + PAD_CFG_NC(GPP_D14), +}; + +const struct pad_config *variant_sku_gpio_table(size_t *num) +{ + const struct pad_config *board_gpio_tables; + const struct device *dev = dev_find_slot(0, PCH_DEVFN_ISH); + if (dev && dev->enabled) { + *num = ARRAY_SIZE(ish_enabled_gpio_table); + board_gpio_tables = ish_enabled_gpio_table; + } else { + *num = ARRAY_SIZE(ish_disabled_gpio_table); + board_gpio_tables = ish_disabled_gpio_table; + } + return board_gpio_tables; +} |