diff options
Diffstat (limited to 'src/mainboard/google/myst/variants/baseboard')
3 files changed, 55 insertions, 12 deletions
diff --git a/src/mainboard/google/myst/variants/baseboard/Makefile.inc b/src/mainboard/google/myst/variants/baseboard/Makefile.inc index ffa462ab8f..3ef89cac66 100644 --- a/src/mainboard/google/myst/variants/baseboard/Makefile.inc +++ b/src/mainboard/google/myst/variants/baseboard/Makefile.inc @@ -1,5 +1,6 @@ bootblock-y += gpio.c +ramstage-$(CONFIG_FW_CONFIG) += fw_config.c ramstage-y += gpio.c ramstage-y += tpm_tis.c diff --git a/src/mainboard/google/myst/variants/baseboard/fw_config.c b/src/mainboard/google/myst/variants/baseboard/fw_config.c new file mode 100644 index 0000000000..9d5c9236d8 --- /dev/null +++ b/src/mainboard/google/myst/variants/baseboard/fw_config.c @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootstate.h> +#include <console/console.h> +#include <fw_config.h> +#include <gpio.h> + +static const struct soc_amd_gpio fp_spi_gpio_table[] = { + /* SOC_CLK_FPMCU_R */ + PAD_NF(GPIO_70, SPI2_CLK, PULL_NONE), + /* SOC_CLK_FPMCU_R_L */ + PAD_NF(GPIO_75, SPI2_CS1_L, PULL_NONE), + /* SPI_SOC_DO_FPMCU_DI_R */ + PAD_NF(GPIO_104, SPI2_DAT0, PULL_NONE), + /* SPI_SOC_DI_FPMCU_DO_R */ + PAD_NF(GPIO_105, SPI2_DAT1, PULL_NONE), +}; + +static const struct soc_amd_gpio fp_uart_gpio_table[] = { + /* UART1_TXD / FPMCU */ + PAD_NF(GPIO_140, UART1_TXD, PULL_NONE), + /* UART1_RXD / FPMCU */ + PAD_NF(GPIO_142, UART1_RXD, PULL_NONE), +}; + +static void fw_config_handle(void *unused) +{ + if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(FP, DISABLED))) { + return; + } + if (fw_config_probe(FW_CONFIG(FP, SPI))) { + printk(BIOS_INFO, "Enabling SPI FP.\n"); + gpio_configure_pads(fp_spi_gpio_table, ARRAY_SIZE(fp_spi_gpio_table)); + } else if (fw_config_probe(FW_CONFIG(FP, UART))) { + printk(BIOS_INFO, "Enabling UART FP.\n"); + gpio_configure_pads(fp_uart_gpio_table, ARRAY_SIZE(fp_uart_gpio_table)); + } else { + printk(BIOS_INFO, "Invalid Fingerprint Setting, leaving FP disabled."); + } +} + +BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/myst/variants/baseboard/gpio.c b/src/mainboard/google/myst/variants/baseboard/gpio.c index 319635415d..9b0de5a349 100644 --- a/src/mainboard/google/myst/variants/baseboard/gpio.c +++ b/src/mainboard/google/myst/variants/baseboard/gpio.c @@ -76,12 +76,12 @@ static const struct soc_amd_gpio base_gpio_table[] = { PAD_NF(GPIO_68, SPI1_DAT2, PULL_NONE), /* ESPI1_DATA3 */ PAD_NF(GPIO_69, SPI1_DAT3, PULL_NONE), - /* SOC_CLK_FPMCU_R TODO(276939271): Selectively init */ - PAD_NF(GPIO_70, SPI2_CLK, PULL_NONE), + /* SOC_CLK_FPMCU_R if SPI FP populated */ + PAD_NC(GPIO_70), /* EN_TCHSCR_REPORT */ PAD_GPO(GPIO_74, LOW), - /* SOC_CLK_FPMCU_R_L TODO(276939271): Selectively init */ - PAD_NF(GPIO_75, SPI2_CS1_L, PULL_NONE), + /* SOC_CLK_FPMCU_R_L if SPI FP populated */ + PAD_NC(GPIO_75), /* Unused */ PAD_NC(GPIO_76), /* ESPI_SOC_CLK_EC_R */ @@ -106,10 +106,10 @@ static const struct soc_amd_gpio base_gpio_table[] = { PAD_GPI(GPIO_91, PULL_NONE), /* CLK_REQ0_L / WLAN */ PAD_NF(GPIO_92, CLK_REQ0_L, PULL_NONE), - /* SPI_SOC_DO_FPMCU_DI_R TODO(276939271): Selectively init */ - PAD_NF(GPIO_104, SPI2_DAT0, PULL_NONE), - /* SPI_SOC_DI_FPMCU_DO_R TODO(276939271): Selectively init */ - PAD_NF(GPIO_105, SPI2_DAT1, PULL_NONE), + /* SPI_SOC_DO_FPMCU_DI_R if SPI FP populated */ + PAD_NC(GPIO_104), + /* SPI_SOC_DI_FPMCU_DO_R if SPI FP populated */ + PAD_NC(GPIO_105), /* RAM_ID_2 */ PAD_GPI(GPIO_106, PULL_NONE), /* RAM_ID_3 */ @@ -138,12 +138,12 @@ static const struct soc_amd_gpio base_gpio_table[] = { PAD_NC(GPIO_138), /* SOC_BIOS_WP_OD */ PAD_GPI(GPIO_139, PULL_NONE), - /* UART1_TXD / FPMCU TODO(276939271): Selectively init */ - PAD_NF(GPIO_140, UART1_TXD, PULL_NONE), + /* UART1_TXD if UART FP populated */ + PAD_NC(GPIO_140), /* UART0_RXD / DBG */ PAD_NF(GPIO_141, UART0_RXD, PULL_NONE), - /* UART1_RXD / FPMCU TODO(276939271): Selectively init */ - PAD_NF(GPIO_142, UART1_RXD, PULL_NONE), + /* UART1_RXD if UART FP populated */ + PAD_NC(GPIO_142), /* UART0_TXD / DBG */ PAD_NF(GPIO_143, UART0_TXD, PULL_NONE), /* EN_PP3300_TCHSCR */ |