diff options
Diffstat (limited to 'src/mainboard/google/kahlee/variants/careena/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/kahlee/variants/careena/devicetree.cb | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/src/mainboard/google/kahlee/variants/careena/devicetree.cb b/src/mainboard/google/kahlee/variants/careena/devicetree.cb new file mode 100644 index 0000000000..3863100b63 --- /dev/null +++ b/src/mainboard/google/kahlee/variants/careena/devicetree.cb @@ -0,0 +1,164 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2015-2017 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +chip soc/amd/stoneyridge + register "spd_addr_lookup" = " + { + { {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0 + }" + register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP" + register "uma_mode" = "UMAMODE_SPECIFIED_SIZE" + register "uma_size" = "32 * MiB" + + # Enable I2C0 for audio, USB3 hub at 400kHz + register "i2c[0]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 95, + .fall_time_ns = 3, + }" + + # Enable I2C1 for H1 at 400kHz + register "i2c[1]" = "{ + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 84, + .fall_time_ns = 4, + }" + + # Enable I2C2 for trackpad, pen at 400kHz + register "i2c[2]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 117, + .fall_time_ns = 113, + }" + + # Enable I2C3 for touchscreen at 400kHz + register "i2c[3]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 82, + .fall_time_ns = 67, + }" + + device cpu_cluster 0 on + device lapic 10 on end + end + device domain 0 on + subsystemid 0x1022 0x1410 inherit + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x98e4 + device pci 1.1 on end # Internal Multimedia + device pci 2.0 on end # PCIe Host Bridge + device pci 2.1 on end # + device pci 2.2 on end # + device pci 2.3 on end # + device pci 2.4 on + chip drivers/generic/bayhub + register "power_saving" = "1" + device pci 00.0 on end + end + end # + device pci 2.5 on end # + device pci 8.0 on end # PSP + device pci 9.0 on end # PCIe Host Bridge + device pci 9.2 on end # HDA + device pci 10.0 on end # xHCI + device pci 11.0 on end # SATA + device pci 12.0 on end # EHCI + device pci 14.0 on # SMbus + end # SMbus + device pci 14.3 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC + device pci 14.7 on end # SD + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + end #domain + device mmio 0xfedc2000 on + chip drivers/generic/adau7002 + device generic 0.0 on end + end + chip drivers/i2c/da7219 + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + register "mclk_name" = ""oscout1"" + device i2c 1a on end + end + chip drivers/generic/max98357a + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)" + register "sdmode_delay" = "5" + device generic 0.1 on end + end + end + device mmio 0xfedc3000 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "desc" = ""Cr50 TPM"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" + device i2c 50 on end + end + end + device mmio 0xfedc4000 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)" + register "wake" = "7" + device i2c 15 on end + end + end + device mmio 0xfedc5000 on + chip drivers/i2c/generic + register "hid" = ""RAYD0001"" + register "desc" = ""Raydium Touchscreen"" + register "probed" = "1" + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" + register "reset_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" + register "enable_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 39 on end + end + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "probed" = "1" + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)" + register "reset_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" + register "enable_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 10 on end + end + end +end #chip soc/amd/stoneyridge |