diff options
Diffstat (limited to 'src/mainboard/google/drallion/variants/sarien_cml/devicetree.cb')
| -rw-r--r-- | src/mainboard/google/drallion/variants/sarien_cml/devicetree.cb | 424 |
1 files changed, 0 insertions, 424 deletions
diff --git a/src/mainboard/google/drallion/variants/sarien_cml/devicetree.cb b/src/mainboard/google/drallion/variants/sarien_cml/devicetree.cb deleted file mode 100644 index c466637918..0000000000 --- a/src/mainboard/google/drallion/variants/sarien_cml/devicetree.cb +++ /dev/null @@ -1,424 +0,0 @@ -chip soc/intel/cannonlake - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "PMC_GPP_A" - register "gpe0_dw1" = "PMC_GPP_C" - register "gpe0_dw2" = "PMC_GPP_D" - - # EC host command ranges - register "gen1_dec" = "0x00040931" # 0x930-0x937 - register "gen2_dec" = "0x00040941" # 0x940-0x947 - register "gen3_dec" = "0x000c0951" # 0x950-0x95f - - # FSP configuration - register "SaGv" = "SaGv_Enabled" - register "HeciEnabled" = "0" - register "SataSalpSupport" = "1" - register "SataMode" = "Sata_AHCI" - register "SataPortsEnable[0]" = "1" - register "SataPortsEnable[1]" = "1" - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[0]" = "1" - register "SataPortsDevSlp[1]" = "1" - register "SataPortsDevSlp[2]" = "1" - register "InternalGfx" = "1" - register "SkipExtGfxScan" = "1" - register "PchPmSlpS3MinAssert" = "3" # 50ms - register "PchPmSlpS4MinAssert" = "4" # 4s - register "PchPmSlpSusMinAssert" = "4" # 4s - register "PchPmSlpAMinAssert" = "4" # 2s - - register "speed_shift_enable" = "1" - register "s0ix_enable" = "1" - register "dptf_enable" = "1" - register "satapwroptimize" = "1" - register "AcousticNoiseMitigation" = "1" - register "SlowSlewRateForIa" = "2" - register "SlowSlewRateForGt" = "2" - register "SlowSlewRateForSa" = "2" - register "SlowSlewRateForFivr" = "2" - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" - register "psys_pmax" = "136" - register "Device4Enable" = "1" - # Enable eDP device - register "DdiPortEdp" = "1" - # Enable HPD for DDI ports B/C - register "DdiPortBHpd" = "1" - register "DdiPortCHpd" = "1" - # Enable DDC for DDI port B - register "DdiPortBDdc" = "1" - - register "LanWakeFromDeepSx" = "0" - register "WolEnableOverride" = "0" - - # Disable iDisplay codec enumeration - register "PchHdaIDispCodecDisconnect" = "1" - register "PchHdaAudioLinkHda" = "1" - - # VR Settings Configuration for 4 Domains - #+----------------+-------+-------+-------+-------+ - #| Domain/Setting | SA | IA | GTUS | GTS | - #+----------------+-------+-------+-------+-------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 5A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 6A | 70A | 31A | 31A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #| AcLoadline | 10.3 | 1.8 | 3.1 | 3.1 | - #| DcLoadline | 10.3 | 1.8 | 3.1 | 3.1 | - #+----------------+-------+-------+-------+-------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(6), - .voltage_limit = 1520, - .ac_loadline = 1030, - .dc_loadline = 1030, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(70), - .voltage_limit = 1520, - .ac_loadline = 180, - .dc_loadline = 180, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(31), - .voltage_limit = 1520, - .ac_loadline = 310, - .dc_loadline = 310, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(31), - .voltage_limit = 1520, - .ac_loadline = 310, - .dc_loadline = 310, - }" - - # Intel Common SoC Config - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Left Type-C Port - register "usb2_ports[1]" = "USB2_PORT_LONG(OC0)" # Right Type-A Port 1 - register "usb2_ports[2]" = "USB2_PORT_LONG(OC1)" # Left Type-A Port - register "usb2_ports[3]" = "USB2_PORT_LONG(OC2)" # Right Type-A Port 2 - register "usb2_ports[4]" = "USB2_PORT_EMPTY" - register "usb2_ports[5]" = "USB2_PORT_LONG(OC_SKIP)" # Camera - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # WWAN - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # USH - register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint - register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Left Type-C Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Right Type-A Port 1 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Left Type-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC2)" # Right Type-A Port 2 - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # WWAN - register "usb3_ports[5]" = "USB3_PORT_EMPTY" - - # Intel Common SoC Config - #+-------------------+---------------------------+ - #| Field | Value | - #+-------------------+---------------------------+ - #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | - #| I2C0 | Touchscreen | - #| I2C1 | Touchpad | - #| I2C4 | H1 TPM | - #+-------------------+---------------------------+ - - register "tcc_offset" = "10" - - # PCH Thermal Trip Temperature in deg C - register "common_soc_config.pch_thermal_trip" = "77" - - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - .i2c[0] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 100, - .fall_time_ns = 80, - }, - .i2c[1] = { - .speed = I2C_SPEED_FAST, - .rise_time_ns = 80, - .fall_time_ns = 110, - }, - .i2c[4] = { - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 36, - .fall_time_ns = 99, - }, - }" - - # PCIe port 8 for Card Reader - register "PcieRpEnable[7]" = "1" - register "PcieRpLtrEnable[7]" = "1" - register "PcieClkSrcUsage[4]" = "7" - register "PcieClkSrcClkReq[4]" = "4" - - # PCIe port 9 for LAN - register "PcieRpEnable[8]" = "1" - register "PcieClkSrcUsage[3]" = "PCIE_CLK_LAN" - register "PcieClkSrcClkReq[3]" = "3" - - # PCIe port 10 for M.2 2230 WLAN - register "PcieRpEnable[9]" = "1" - register "PcieClkSrcUsage[1]" = "9" - register "PcieClkSrcClkReq[1]" = "1" - - # PCIe port 13 for M.2 2280 SSD - register "PcieRpEnable[12]" = "1" - register "PcieRpLtrEnable[12]" = "1" - register "PcieClkSrcUsage[2]" = "12" - register "PcieClkSrcClkReq[2]" = "2" - - # GPIO PM programming - register "gpio_override_pm" = "1" - - # GPIO community PM configuration - # Disable dynamic clock gating; with bits 0-5 set in these registers, - # some short interrupt pulses were missed (esp. cr50 irq) - register "gpio_pm[COMM_0]" = "0" - register "gpio_pm[COMM_1]" = "0" - register "gpio_pm[COMM_2]" = "0" - register "gpio_pm[COMM_3]" = "0" - register "gpio_pm[COMM_4]" = "0" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 04.0 on end # SA Thermal device - device pci 12.0 on end # Thermal Subsystem - device pci 12.5 off end # UFS SCS - device pci 12.6 off end # GSPI #2 - device pci 13.0 off end # Integrated Sensor Hub - device pci 14.0 on - chip drivers/usb/acpi - register "desc" = ""Root Hub"" - register "type" = "UPC_TYPE_HUB" - device usb 0.0 on - chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 2.0 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-A Port 1"" - register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 2.1 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-A Port"" - register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" - device usb 2.2 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-A Port 2"" - register "type" = "UPC_TYPE_A" - register "group" = "ACPI_PLD_GROUP(2, 2)" - device usb 2.4 on end - end - chip drivers/usb/acpi - register "desc" = ""Camera"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.5 on end - end - chip drivers/usb/acpi - register "desc" = ""WWAN"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.6 on end - end - chip drivers/usb/acpi - register "desc" = ""USH"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.7 on end - end - chip drivers/usb/acpi - register "desc" = ""Fingerprint"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 2.8 on end - end - chip drivers/usb/acpi - register "desc" = ""Bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H15)" - device usb 2.9 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-C Port"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "group" = "ACPI_PLD_GROUP(1, 1)" - device usb 3.0 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-A Port 1"" - register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(2, 1)" - device usb 3.1 on end - end - chip drivers/usb/acpi - register "desc" = ""Left Type-A Port"" - register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(1, 2)" - device usb 3.2 on end - end - chip drivers/usb/acpi - register "desc" = ""Right Type-A Port 2"" - register "type" = "UPC_TYPE_USB3_A" - register "group" = "ACPI_PLD_GROUP(2, 2)" - device usb 3.3 on end - end - chip drivers/usb/acpi - register "desc" = ""WWAN"" - register "type" = "UPC_TYPE_INTERNAL" - device usb 3.4 on end - end - end - end - end # USB xHCI - device pci 14.1 off end # USB xDCI (OTG) - chip drivers/intel/wifi - register "wake" = "PME_B0_EN_BIT" - device pci 14.3 on end # CNVi wifi - end - device pci 14.5 off end # SDCard - device pci 15.0 on - chip drivers/i2c/hid - register "generic.hid" = ""ELAN900C"" - register "generic.desc" = ""ELAN Touchscreen"" - register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_C23_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E7)" - register "generic.reset_delay_ms" = "10" - register "generic.enable_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" - register "generic.enable_delay_ms" = "55" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - register "generic.device_present_gpio" = "GPP_B4" - register "generic.device_present_gpio_invert" = "1" - device i2c 10 on end - end - chip drivers/i2c/generic - register "hid" = ""MLFS0000"" - register "desc" = ""Melfas Touchscreen"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C23_IRQ)" - register "probed" = "1" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E7)" - register "reset_delay_ms" = "10" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" - register "enable_delay_ms" = "55" - register "has_power_resource" = "1" - register "device_present_gpio" = "GPP_B4" - register "device_present_gpio_invert" = "1" - device i2c 34 on end - end - end # I2C #0 - device pci 15.1 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" - register "probed" = "1" - device i2c 2c on end - end - end # I2C #1 - device pci 15.2 off end # I2C #2 - device pci 15.3 off end # I2C #3 - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 16.5 off end # Management Engine Interface 4 - device pci 17.0 on end # SATA - device pci 19.0 on - chip drivers/i2c/tpm - register "hid" = ""GOOG0005"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D18_IRQ)" - device i2c 50 on end - end - end # I2C #4 - device pci 19.1 off end # I2C #5 - device pci 19.2 on end # UART #2 - device pci 1a.0 off end # eMMC - device pci 1c.0 on end # PCI Express Port 1 (USB) - device pci 1c.1 off end # PCI Express Port 2 (USB) - device pci 1c.2 off end # PCI Express Port 3 (USB) - device pci 1c.3 off end # PCI Express Port 4 (USB) - device pci 1c.4 off end # PCI Express Port 5 (USB) - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 on end # PCI Express Port 8 - device pci 1d.0 on - smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "2230" "SlotDataBusWidth1X" - end # PCI Express Port 9 - device pci 1d.1 on end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1d.4 on - smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "2280" "SlotDataBusWidth4X" - end # PCI Express Port 13 (x4) - device pci 1e.0 off end # UART #0 - device pci 1e.1 off end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - device pci 1f.0 on - chip ec/google/wilco - device pnp 0c09.0 on end - end - end # LPC/eSPI - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end |