diff options
Diffstat (limited to 'src/mainboard/google/brya/variants/ghost/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/brya/variants/ghost/overridetree.cb | 294 |
1 files changed, 0 insertions, 294 deletions
diff --git a/src/mainboard/google/brya/variants/ghost/overridetree.cb b/src/mainboard/google/brya/variants/ghost/overridetree.cb deleted file mode 100644 index 95c1b4dba0..0000000000 --- a/src/mainboard/google/brya/variants/ghost/overridetree.cb +++ /dev/null @@ -1,294 +0,0 @@ -chip soc/intel/alderlake - #+-------------------+---------------------------+ - #| Field | Value | - #+-------------------+---------------------------+ - #| GSPI1 | FPMCU | - #| I2C0 | Audio | - #| I2C1 | cr50 TPM. Early init is | - #| | required to set up a BAR | - #| | for TPM communication | - #| I2C2 | Misc (Cam, Display, LED) | - #| I2C3 | Touchscreen | - #| I2C4 | NC | - #| I2C5 | Touchpad | - #+-------------------+---------------------------+ - register "common_soc_config" = "{ - .i2c[0] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[1] = { - .early_init = 1, - .speed = I2C_SPEED_FAST, - }, - .i2c[2] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[3] = { - .speed = I2C_SPEED_FAST, - }, - .i2c[5] = { - .speed = I2C_SPEED_FAST, - }, - }" - - # I2C Port Config - register "serial_io_i2c_mode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoPci, - [PchSerialIoIndexI2C1] = PchSerialIoPci, - [PchSerialIoIndexI2C2] = PchSerialIoPci, - [PchSerialIoIndexI2C3] = PchSerialIoPci, - [PchSerialIoIndexI2C4] = PchSerialIoDisabled, - [PchSerialIoIndexI2C5] = PchSerialIoPci, - [PchSerialIoIndexI2C7] = PchSerialIoDisabled, - }" - - # GSPI config - register "serial_io_gspi_mode" = "{ - [PchSerialIoIndexGSPI0] = PchSerialIoPci, - [PchSerialIoIndexGSPI1] = PchSerialIoPci, - }" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 - register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # USB2_C1 - register "usb2_ports[2]" = "USB2_PORT_EMPTY" - register "usb2_ports[3]" = "USB2_PORT_EMPTY" - register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # DCI port - register "usb2_ports[5]" = "USB2_PORT_EMPTY" - register "usb2_ports[8]" = "USB2_PORT_EMPTY" - - register "usb3_ports[0]" = "USB3_PORT_EMPTY" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # DCI port - register "usb3_ports[3]" = "USB3_PORT_EMPTY" - - register "tcss_ports[0]" = "TCSS_PORT_EMPTY" - register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC1)" # TypeC C1 - register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC0)" # TypeC C0 - - device domain 0 on - device ref cnvi_wifi on - chip drivers/wifi/generic - register "wake" = "GPE0_PME_B0" - device generic 0 on end - end - end - device ref pcie_rp6 off end - device ref pcie_rp7 off end - device ref pcie_rp8 off end - device ref tcss_dma0 on - chip drivers/intel/usb4/retimer - register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" - use tcss_usb3_port2 as dfp[0].typec_port - device generic 0 on end - end - end - device ref tcss_dma1 on - chip drivers/intel/usb4/retimer - register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" - use tcss_usb3_port3 as dfp[0].typec_port - device generic 0 on end - end - end - device ref i2c0 on - chip drivers/i2c/cs42l42 - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" - register "ts_inv" = "true" - register "ts_dbnc_rise" = "RISE_DEB_1000_MS" - register "ts_dbnc_fall" = "FALL_DEB_0_MS" - register "btn_det_init_dbnce" = "100" - register "btn_det_event_dbnce" = "10" - register "bias_lvls[0]" = "15" - register "bias_lvls[1]" = "8" - register "bias_lvls[2]" = "4" - register "bias_lvls[3]" = "1" - register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW" - register "hs_bias_sense_disable" = "true" - device i2c 48 on end - end - chip drivers/i2c/max98396 - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" - register "vmon_slot_no" = "0" - register "imon_slot_no" = "1" - register "uid" = "0" - register "desc" = ""Right Speaker Amp"" - register "name" = ""MAXR"" - device i2c 3c on end - end - chip drivers/i2c/max98396 - register "vmon_slot_no" = "2" - register "imon_slot_no" = "3" - register "uid" = "1" - register "desc" = ""Left Speaker Amp"" - register "name" = ""MAXL"" - device i2c 3d on end - end - end - device ref i2c1 on - chip drivers/i2c/tpm - register "hid" = ""GOOG0005"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" - device i2c 50 on end - end - end - device ref i2c2 on - chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI5675"" - register "acpi_uid" = "0" - register "acpi_name" = ""CAM0"" - register "chip_name" = ""Ov 5675 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - register "ssdb.lanes_used" = "2" - register "ssdb.link_used" = "1" - register "num_freq_entries" = "1" - register "link_freq[0]" = "DEFAULT_LINK_FREQ" - register "remote_name" = ""IPU0"" - register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" - - register "has_power_resource" = "1" - - # Controls - register "clk_panel.clks[0].clknum" = "IMGCLKOUT_2" - register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" - - register "gpio_panel.gpio[0].gpio_num" = "GPP_C4" # EN_UCAM_PWR - register "gpio_panel.gpio[1].gpio_num" = "GPP_F20" # UCAM_RST_L - - # ON - register "on_seq.ops_cnt" = "4" - register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - - # OFF - register "off_seq.ops_cnt" = "3" - register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - - device i2c 36 on end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" - register "acpi_uid" = "1" - register "acpi_name" = ""NVM0"" - register "chip_name" = ""M24C64X"" - register "device_type" = "INTEL_ACPI_CAMERA_NVM" - register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" - - register "nvm_size" = "0x2000" - register "nvm_pagesize" = "1" - register "nvm_readonly" = "1" - register "nvm_width" = "0x10" - register "nvm_compat" = ""atmel,24c64"" - device i2c 50 on end - end - end - device ref ipu on - chip drivers/intel/mipi_camera - register "acpi_uid" = "0x50000" - register "acpi_name" = ""IPU0"" - register "device_type" = "INTEL_ACPI_CAMERA_CIO2" - - register "cio2_num_ports" = "1" - register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used - register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" - register "cio2_prt[0]" = "1" - device generic 0 on end - end - end - device ref gspi0 on - chip drivers/nxp/uwb - register "name" = ""UWB0"" - register "desc" = ""NXP UWB Module"" - register "speed" = "1000000" - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_HIGH(GPP_F21)" - register "ce_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A12)" - register "ri_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A7)" - device spi 0 on end - end - end - device ref gspi1 on - chip drivers/spi/acpi - register "name" = ""CRFP"" - register "hid" = "ACPI_DT_NAMESPACE_HID" - register "uid" = "1" - register "compat_string" = ""google,cros-ec-spi"" - register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" - register "wake" = "GPE0_DW2_15" - device spi 0 on end - end # FPMCU - end - device ref pch_espi on - chip ec/google/chromeec - # Replicate Brya, except we have 2 ports instead of 3. - use conn0 as mux_conn[0] - use conn1 as mux_conn[1] - device pnp 0c09.0 on end - end - end - device ref pmc hidden - chip drivers/intel/pmc_mux - device generic 0 on - chip drivers/intel/pmc_mux/conn - # C0: Left side (on DB) - use usb2_port1 as usb2_port - use tcss_usb3_port3 as usb3_port - device generic 0 alias conn0 on end - end - chip drivers/intel/pmc_mux/conn - # C1: Right side (on MLB) - use usb2_port2 as usb2_port - use tcss_usb3_port2 as usb3_port - device generic 1 alias conn1 on end - end - end - end - end - device ref tcss_xhci on - chip drivers/usb/acpi - device ref tcss_root_hub on - chip drivers/usb/acpi - register "desc" = ""USB3 Type-C Port C0 (DB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - # USB C0 is on the LEFT panel, LEFT side (i.e. rear) - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" - device ref tcss_usb3_port3 on end - end - chip drivers/usb/acpi - register "desc" = ""USB3 Type-C Port C1 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - # USB C1 is on the RIGHT panel, RIGHT side (i.e. rear) - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" - device ref tcss_usb3_port2 on end - end - end - end - end - device ref xhci on - chip drivers/usb/acpi - device ref xhci_root_hub on - chip drivers/usb/acpi - register "desc" = ""USB2 Type-C Port C0 (DB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - # USB C0 is on the LEFT panel, LEFT side (i.e. rear) - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" - device ref usb2_port1 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Type-C Port C1 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - # USB C1 is on the RIGHT panel, RIGHT side (i.e. rear) - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" - device ref usb2_port2 on end - end - end - end - end - end -end |