diff options
Diffstat (limited to 'src/mainboard/google/brya/variants/brya4es/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/brya/variants/brya4es/overridetree.cb | 772 |
1 files changed, 0 insertions, 772 deletions
diff --git a/src/mainboard/google/brya/variants/brya4es/overridetree.cb b/src/mainboard/google/brya/variants/brya4es/overridetree.cb deleted file mode 100644 index de10765ceb..0000000000 --- a/src/mainboard/google/brya/variants/brya4es/overridetree.cb +++ /dev/null @@ -1,772 +0,0 @@ -fw_config - field DB_USB 0 3 - option USB_ABSENT 0 - option USB3_PS8815 1 - end - field DB_SD 4 5 - option SD_ABSENT 0 - option SD_GL9755S 1 - end - field KB_BL 7 7 - option KB_BL_ABSENT 0 - option KB_BL_PRESENT 1 - end - field AUDIO 8 10 - option AUDIO_UNKNOWN 0 - option MAX98357_ALC5682I_I2S 1 - option MAX98373_ALC5682_SNDW 2 - option MAX98373_NAU88L25B_I2S 3 - option ALC1019_NAU88L25B_I2S 4 - end - field DB_LTE 11 12 - option LTE_ABSENT 0 - option LTE_USB 1 - option LTE_PCIE 2 - end - field UFC 13 14 - option UFC_USB 0 - option UFC_MIPI_IMX208 1 - end - # Bits 15 and 16 were intended for WFC but never declared here - field HPS 17 17 - option HPS_ABSENT 0 - option HPS_PRESENT 1 - end -end - -chip soc/intel/alderlake - register "sagv" = "SaGv_Enabled" - - register "platform_pmax" = "145" - - register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Type-A MLB Port - - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port - - register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}" - - # FIVR configurations for brya are disabled since the board doesn't have V1p05 and Vnn - # bypass rails implemented. - register "ext_fivr_settings" = "{ - .configure_ext_fivr = 1, - }" - - device domain 0 on - device ref dtt on - chip drivers/intel/dptf - ## sensor information - register "options.tsr[0].desc" = ""DRAM_SOC"" - register "options.tsr[1].desc" = ""Ambient"" - register "options.tsr[2].desc" = ""Charger"" - register "options.tsr[3].desc" = ""WWAN"" - - # TODO: below values are initial reference values only - ## Active Policy - register "policies.active" = "{ - [0] = { - .target = DPTF_CPU, - .thresholds = { - TEMP_PCT(85, 90), - TEMP_PCT(80, 80), - TEMP_PCT(75, 70), - TEMP_PCT(70, 50), - TEMP_PCT(65, 30), - } - }, - [1] = { - .target = DPTF_TEMP_SENSOR_1, - .thresholds = { - TEMP_PCT(50, 90), - TEMP_PCT(48, 70), - TEMP_PCT(46, 60), - TEMP_PCT(43, 40), - TEMP_PCT(40, 30), - } - } - }" - - ## Passive Policy - register "policies.passive" = "{ - [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000), - [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000), - [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 5000), - [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000), - [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 75, 5000), - }" - - ## Critical Policy - register "policies.critical" = "{ - [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), - [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), - [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), - [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), - [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 85, SHUTDOWN), - }" - - register "controls.power_limits" = "{ - .pl1 = { - .min_power = 3000, - .max_power = 15000, - .time_window_min = 28 * MSECS_PER_SEC, - .time_window_max = 32 * MSECS_PER_SEC, - .granularity = 200, - }, - .pl2 = { - .min_power = 55000, - .max_power = 55000, - .time_window_min = 28 * MSECS_PER_SEC, - .time_window_max = 32 * MSECS_PER_SEC, - .granularity = 1000, - } - }" - - ## Charger Performance Control (Control, mA) - register "controls.charger_perf" = "{ - [0] = { 255, 1700 }, - [1] = { 24, 1500 }, - [2] = { 16, 1000 }, - [3] = { 8, 500 } - }" - - ## Fan Performance Control (Percent, Speed, Noise, Power) - register "controls.fan_perf" = "{ - [0] = { 90, 6700, 220, 2200, }, - [1] = { 80, 5800, 180, 1800, }, - [2] = { 70, 5000, 145, 1450, }, - [3] = { 60, 4900, 115, 1150, }, - [4] = { 50, 3838, 90, 900, }, - [5] = { 40, 2904, 55, 550, }, - [6] = { 30, 2337, 30, 300, }, - [7] = { 20, 1608, 15, 150, }, - [8] = { 10, 800, 10, 100, }, - [9] = { 0, 0, 0, 50, } - }" - - ## Fan options - register "options.fan.fine_grained_control" = "1" - register "options.fan.step_size" = "2" - - device generic 0 alias dptf_policy on end - end - end - device ref ipu on - chip drivers/intel/mipi_camera - register "acpi_uid" = "0x50000" - register "acpi_name" = ""IPU0"" - register "device_type" = "INTEL_ACPI_CAMERA_CIO2" - - register "cio2_num_ports" = "1" - register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used - register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" - register "cio2_prt[0]" = "2" - device generic 0 on - # MIPI lanes are split between UFC and WFC depending on - # whether the UFC is USB or MIPI hence probing UFC_USB - probe UFC UFC_USB - end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "0x50000" - register "acpi_name" = ""IPU0"" - register "device_type" = "INTEL_ACPI_CAMERA_CIO2" - - register "cio2_num_ports" = "2" - register "cio2_lanes_used" = "{4,2}" # 4 and 2 CSI Camera lanes are used - register "cio2_lane_endpoint[0]" = ""^I2C0.CAM0"" - register "cio2_lane_endpoint[1]" = ""^I2C2.CAM1"" - register "cio2_prt[0]" = "2" - register "cio2_prt[1]" = "1" - device generic 1 on - probe UFC UFC_MIPI_IMX208 - end - end - end - device ref cnvi_wifi on - chip drivers/wifi/generic - register "wake" = "GPE0_PME_B0" - register "enable_cnvi_ddr_rfim" = "true" - device generic 0 on end - end - end - device ref pcie_rp6 on - # Enable WWAN PCIE 6 using clk 5 - register "pch_pcie_rp[PCH_RP(6)]" = "{ - .clk_src = 5, - .clk_req = 5, - .flags = PCIE_RP_LTR | PCIE_RP_AER, - }" - chip soc/intel/common/block/pcie/rtd3 - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)" - register "reset_off_delay_ms" = "20" - # register "reset_delay_ms" = "1000" - register "srcclk_pin" = "5" - register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL" - register "skip_on_off_support" = "true" - device generic 0 alias rp6_rtd3 on - probe DB_LTE LTE_PCIE - end - end - chip drivers/wwan/fm - register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F21)" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E16)" - register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E0)" - register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A7)" - register "add_acpi_dma_property" = "true" - use rp6_rtd3 as rtd3dev - device generic 0 on - probe DB_LTE LTE_PCIE - end - end - probe DB_LTE LTE_PCIE - end - device ref tcss_dma0 on - chip drivers/intel/usb4/retimer - register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" - use tcss_usb3_port1 as dfp[0].typec_port - device generic 0 on end - end - end - device ref tcss_dma1 on - chip drivers/intel/usb4/retimer - register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" - use tcss_usb3_port3 as dfp[0].typec_port - device generic 0 on end - end - end - device ref pcie_rp8 on - chip soc/intel/common/block/pcie/rtd3 - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)" - register "srcclk_pin" = "3" - device generic 0 on end - end - end #PCIE8 SD card - device ref i2c0 on - chip drivers/i2c/generic - register "hid" = ""10EC5682"" - register "name" = ""RT58"" - register "desc" = ""Headset Codec"" - register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" - # Set the jd_src to RT5668_JD1 for jack detection - register "property_count" = "1" - register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" - register "property_list[0].name" = ""realtek,jd-src"" - register "property_list[0].integer" = "1" - device i2c 1a on - probe AUDIO MAX98357_ALC5682I_I2S - end - end - chip drivers/i2c/nau8825 - register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)" - register "jkdet_enable" = "1" - register "jkdet_pull_enable" = "0" - register "jkdet_polarity" = "1" # ActiveLow - register "vref_impedance" = "2" # 125kOhm - register "micbias_voltage" = "6" # 2.754 - register "sar_threshold_num" = "4" - register "sar_threshold[0]" = "0x0c" - register "sar_threshold[1]" = "0x1c" - register "sar_threshold[2]" = "0x38" - register "sar_threshold[3]" = "0x60" - register "sar_hysteresis" = "1" - register "sar_voltage" = "0" # VDDA - register "sar_compare_time" = "0" # 500ns - register "sar_sampling_time" = "0" # 2us - register "short_key_debounce" = "2" # 100ms - register "jack_insert_debounce" = "7" # 512ms - register "jack_eject_debounce" = "7" # 512ms - device i2c 1a on - probe AUDIO ALC1019_NAU88L25B_I2S - end - end - chip drivers/generic/alc1015 - register "hid" = ""RTL1019"" - register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" - device generic 1 on - probe AUDIO ALC1019_NAU88L25B_I2S - end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI8856"" - register "acpi_uid" = "0" - register "acpi_name" = ""CAM0"" - register "chip_name" = ""Ov 8856 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - register "ssdb.lanes_used" = "4" - register "ssdb.link_used" = "0" - register "ssdb.vcm_type" = "0x0C" - register "vcm_name" = ""VCM0"" - register "num_freq_entries" = "2" - register "link_freq[0]" = "360 * MHz" # 360 MHz - register "link_freq[1]" = "180 * MHz" # 180 MHz - register "remote_name" = ""IPU0"" - - register "has_power_resource" = "1" - #Controls - register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" - register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" - - register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #power_enable_2p8 - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #power_enable_1p2 - register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset - - #_ON - register "on_seq.ops_cnt" = "5" - register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" - - #_OFF - register "off_seq.ops_cnt" = "4" - register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - - device i2c 10 on end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "2" - register "acpi_name" = ""VCM0"" - register "chip_name" = ""DW9768 VCM"" - register "device_type" = "INTEL_ACPI_CAMERA_VCM" - - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" - register "vcm_compat" = ""dongwoon,dw9768"" - - device i2c 0C on end - end - chip drivers/intel/mipi_camera - register "acpi_uid" = "1" - register "acpi_name" = ""NVM0"" - register "chip_name" = ""AT24 EEPROM"" - register "device_type" = "INTEL_ACPI_CAMERA_NVM" - - register "pr0" = ""\\_SB.PCI0.I2C0.CAM0.PRIC"" - register "nvm_compat" = ""atmel,24c1024"" - - register "nvm_size" = "0x2800" - register "nvm_pagesize" = "0x01" - register "nvm_readonly" = "0x01" - register "nvm_width" = "0x10" - - device i2c 58 on end - end - end #I2C0 - device ref i2c1 on - chip drivers/i2c/hid - register "generic.hid" = ""ELAN9050"" - register "generic.desc" = ""ELAN Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" - register "generic.reset_delay_ms" = "300" - register "generic.reset_off_delay_ms" = "1" - register "generic.enable_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" - register "generic.enable_delay_ms" = "6" - register "generic.stop_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" - register "generic.stop_off_delay_ms" = "1" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 0x10 on end - end - chip drivers/i2c/hid - register "generic.hid" = ""GDIX0000"" - register "generic.desc" = ""Goodix Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" - register "generic.reset_delay_ms" = "120" - register "generic.reset_off_delay_ms" = "3" - register "generic.enable_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" - register "generic.enable_delay_ms" = "12" - register "generic.stop_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" - register "generic.stop_off_delay_ms" = "1" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x01" - device i2c 0x5d on end - end - chip drivers/i2c/hid - register "generic.hid" = ""SIS9815"" - register "generic.desc" = ""SIS Touchscreen"" - register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" - register "generic.probed" = "1" - register "generic.reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" - register "generic.stop_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" - register "generic.stop_delay_ms" = "100" - register "generic.enable_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" - register "generic.enable_delay_ms" = "7" - register "generic.has_power_resource" = "1" - register "hid_desc_reg_offset" = "0x00" - device i2c 5c on end - end - end - device ref i2c2 on - chip drivers/i2c/sx9324 - register "desc" = ""SAR1 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "1" - register "reg_gnrl_ctrl0" = "0x16" - register "reg_gnrl_ctrl1" = "0x21" - register "reg_afe_ctrl0" = "0x00" - register "reg_afe_ctrl1" = "0x10" - register "reg_afe_ctrl2" = "0x00" - register "reg_afe_ctrl3" = "0x00" - register "reg_afe_ctrl4" = "0x07" - register "reg_afe_ctrl5" = "0x00" - register "reg_afe_ctrl6" = "0x00" - register "reg_afe_ctrl7" = "0x07" - register "reg_afe_ctrl8" = "0x12" - register "reg_afe_ctrl9" = "0x0f" - register "reg_prox_ctrl0" = "0x12" - register "reg_prox_ctrl1" = "0x12" - register "reg_prox_ctrl2" = "0x90" - register "reg_prox_ctrl3" = "0x60" - register "reg_prox_ctrl4" = "0x0c" - register "reg_prox_ctrl5" = "0x12" - register "reg_prox_ctrl6" = "0x3c" - register "reg_prox_ctrl7" = "0x58" - register "reg_adv_ctrl0" = "0x00" - register "reg_adv_ctrl1" = "0x00" - register "reg_adv_ctrl2" = "0x00" - register "reg_adv_ctrl3" = "0x00" - register "reg_adv_ctrl4" = "0x00" - register "reg_adv_ctrl5" = "0x05" - register "reg_adv_ctrl6" = "0x00" - register "reg_adv_ctrl7" = "0x00" - register "reg_adv_ctrl8" = "0x00" - register "reg_adv_ctrl9" = "0x00" - register "reg_adv_ctrl10" = "0x5c" - register "reg_adv_ctrl11" = "0x52" - register "reg_adv_ctrl12" = "0xb5" - register "reg_adv_ctrl13" = "0x00" - register "reg_adv_ctrl14" = "0x80" - register "reg_adv_ctrl15" = "0x0c" - register "reg_adv_ctrl16" = "0x38" - register "reg_adv_ctrl17" = "0x56" - register "reg_adv_ctrl18" = "0x33" - register "reg_adv_ctrl19" = "0xf0" - register "reg_adv_ctrl20" = "0xf0" - device i2c 28 on end - end - chip drivers/i2c/sx9324 - register "desc" = ""SAR2 Proximity Sensor"" - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)" - register "speed" = "I2C_SPEED_FAST" - register "uid" = "2" - register "reg_gnrl_ctrl0" = "0x16" - register "reg_gnrl_ctrl1" = "0x21" - register "reg_afe_ctrl0" = "0x00" - register "reg_afe_ctrl1" = "0x10" - register "reg_afe_ctrl2" = "0x00" - register "reg_afe_ctrl3" = "0x00" - register "reg_afe_ctrl4" = "0x07" - register "reg_afe_ctrl5" = "0x00" - register "reg_afe_ctrl6" = "0x00" - register "reg_afe_ctrl7" = "0x07" - register "reg_afe_ctrl8" = "0x12" - register "reg_afe_ctrl9" = "0x0f" - register "reg_prox_ctrl0" = "0x12" - register "reg_prox_ctrl1" = "0x12" - register "reg_prox_ctrl2" = "0x90" - register "reg_prox_ctrl3" = "0x60" - register "reg_prox_ctrl4" = "0x0c" - register "reg_prox_ctrl5" = "0x12" - register "reg_prox_ctrl6" = "0x3c" - register "reg_prox_ctrl7" = "0x58" - register "reg_adv_ctrl0" = "0x00" - register "reg_adv_ctrl1" = "0x00" - register "reg_adv_ctrl2" = "0x00" - register "reg_adv_ctrl3" = "0x00" - register "reg_adv_ctrl4" = "0x00" - register "reg_adv_ctrl5" = "0x05" - register "reg_adv_ctrl6" = "0x00" - register "reg_adv_ctrl7" = "0x00" - register "reg_adv_ctrl8" = "0x00" - register "reg_adv_ctrl9" = "0x00" - register "reg_adv_ctrl10" = "0x5c" - register "reg_adv_ctrl11" = "0x52" - register "reg_adv_ctrl12" = "0xb5" - register "reg_adv_ctrl13" = "0x00" - register "reg_adv_ctrl14" = "0x80" - register "reg_adv_ctrl15" = "0x0c" - register "reg_adv_ctrl16" = "0x38" - register "reg_adv_ctrl17" = "0x56" - register "reg_adv_ctrl18" = "0x33" - register "reg_adv_ctrl19" = "0xf0" - register "reg_adv_ctrl20" = "0xf0" - device i2c 2C on end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = ""INT3478"" - register "acpi_uid" = "0" - register "acpi_name" = ""CAM1"" - register "chip_name" = ""imx 208 Camera"" - register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" - - register "ssdb.lanes_used" = "2" - register "ssdb.link_used" = "1" - register "num_freq_entries" = "2" - register "link_freq[0]" = "384 * MHz" # 384 MHz - register "link_freq[1]" = "96 * MHz" # 96 MHz - register "remote_name" = ""IPU0"" - - register "has_power_resource" = "1" - #Controls - register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X - register "gpio_panel.gpio[1].gpio_num" = "GPP_A17" #EN_UCAM_PWR - register "gpio_panel.gpio[2].gpio_num" = "GPP_F20" #reset - register "gpio_panel.gpio[3].gpio_num" = "GPP_H21" #CLK_EN - - #_ON - register "on_seq.ops_cnt" = "5" - register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(3, 0)" - register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" - register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" - - #_OFF - register "off_seq.ops_cnt" = "4" - register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(3, 0)" - register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" - register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" - register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" - - device i2c 10 on - probe UFC UFC_MIPI_IMX208 - end - end - chip drivers/intel/mipi_camera - register "acpi_hid" = ""ACPI_DT_NAMESPACE_HID"" - register "acpi_uid" = "1" - register "acpi_name" = ""NVM1"" - register "chip_name" = ""GT24C16S"" - register "device_type" = "INTEL_ACPI_CAMERA_NVM" - - register "pr0" = ""\\_SB.PCI0.I2C2.CAM1.PRIC"" - register "nvm_compat" = ""atmel,24c1024"" - - register "nvm_size" = "0x800" - register "nvm_pagesize" = "0x01" - register "nvm_readonly" = "0x01" - register "nvm_width" = "0x08" - - device i2c 50 on - probe UFC UFC_MIPI_IMX208 - end - end - chip drivers/i2c/generic - register "hid" = ""GOOG0020"" - register "desc" = ""ChromeOS HPS"" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E7)" # EN_HPS_PWR - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E3_IRQ)" # HPS_INT_ODL - # HPS uses I2C addresses 0x30 and 0x51. - # The address we provide here is not significant because - # neither coreboot nor Linux have a driver for HPS, - # it's only used from userspace. - device i2c 30 on - probe HPS HPS_PRESENT - end - end - end - device ref i2c3 on - chip drivers/i2c/tpm - register "hid" = ""GOOG0005"" - register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" - device i2c 50 on end - end - end - device ref i2c5 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" - register "wake" = "GPE0_DW2_14" - register "detect" = "1" - device i2c 15 on end - end - end - device ref hda on - chip drivers/generic/max98357a - register "hid" = ""MX98357A"" - register "sdmode_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)" - register "sdmode_delay" = "5" - device generic 0 on - probe AUDIO MAX98357_ALC5682I_I2S - end - end - - chip drivers/intel/soundwire - device generic 0 on - probe AUDIO MAX98373_ALC5682_SNDW - chip drivers/soundwire/alc5682 - # SoundWire Link 0 ID 1 - register "desc" = ""Headset Codec"" - device generic 0.1 on end - end - chip drivers/soundwire/max98373 - # SoundWire Link 2 ID 3 - register "desc" = ""Left Speaker Amp"" - device generic 2.3 on end - end - chip drivers/soundwire/max98373 - # SoundWire Link 2 ID 7 - register "desc" = ""Right Speaker Amp"" - device generic 2.7 on end - end - end - end - end - device ref gspi1 on - chip drivers/spi/acpi - register "name" = ""CRFP"" - register "hid" = "ACPI_DT_NAMESPACE_HID" - register "uid" = "1" - register "compat_string" = ""google,cros-ec-spi"" - register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" - register "wake" = "GPE0_DW2_15" - register "has_power_resource" = "1" - register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" - register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" - register "enable_delay_ms" = "3" - device spi 0 on end - end # FPMCU - end - device ref pch_espi on - chip ec/google/chromeec - use conn0 as mux_conn[0] - use conn1 as mux_conn[1] - use conn2 as mux_conn[2] - device pnp 0c09.0 on end - end - end - device ref pmc hidden - chip drivers/intel/pmc_mux - device generic 0 on - chip drivers/intel/pmc_mux/conn - use usb2_port1 as usb2_port - use tcss_usb3_port1 as usb3_port - device generic 0 alias conn0 on end - end - chip drivers/intel/pmc_mux/conn - use usb2_port2 as usb2_port - use tcss_usb3_port2 as usb3_port - device generic 1 alias conn1 on end - end - chip drivers/intel/pmc_mux/conn - use usb2_port3 as usb2_port - use tcss_usb3_port3 as usb3_port - device generic 2 alias conn2 on end - end - end - end - end - device ref tcss_xhci on - chip drivers/usb/acpi - device ref tcss_root_hub on - chip drivers/usb/acpi - register "desc" = ""USB3 Type-C Port C0 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))" - device ref tcss_usb3_port1 on end - end - chip drivers/usb/acpi - register "desc" = ""USB3 Type-C Port C1 (DB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" - device ref tcss_usb3_port2 on end - end - chip drivers/usb/acpi - register "desc" = ""USB3 Type-C Port C2 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" - device ref tcss_usb3_port3 on end - end - end - end - end - device ref xhci on - chip drivers/usb/acpi - device ref xhci_root_hub on - chip drivers/usb/acpi - register "desc" = ""USB2 Type-C Port C0 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))" - device ref usb2_port1 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Type-C Port C1 (DB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))" - device ref usb2_port2 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Type-C Port C2 (MLB)"" - register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))" - device ref usb2_port3 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 WWAN"" - register "type" = "UPC_TYPE_INTERNAL" - device ref usb2_port4 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Camera"" - register "type" = "UPC_TYPE_INTERNAL" - device ref usb2_port6 on - probe UFC UFC_USB - end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Type-A Port A0 (DB)"" - register "type" = "UPC_TYPE_A" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" - device ref usb2_port9 on end - end - chip drivers/usb/acpi - register "desc" = ""USB2 Bluetooth"" - register "type" = "UPC_TYPE_INTERNAL" - register "reset_gpio" = - "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" - device ref usb2_port10 on end - end - chip drivers/usb/acpi - register "desc" = ""USB3 Type-A Port A0 (DB)"" - register "type" = "UPC_TYPE_USB3_A" - register "use_custom_pld" = "true" - register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))" - device ref usb3_port1 on end - end - chip drivers/usb/acpi - register "desc" = ""USB3 WWAN"" - register "type" = "UPC_TYPE_INTERNAL" - device ref usb3_port4 on end - end - end - end - end - end -end |