diff options
Diffstat (limited to 'src/mainboard/google/bolt/romstage.c')
-rw-r--r-- | src/mainboard/google/bolt/romstage.c | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/src/mainboard/google/bolt/romstage.c b/src/mainboard/google/bolt/romstage.c deleted file mode 100644 index 817fce9d52..0000000000 --- a/src/mainboard/google/bolt/romstage.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2012 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <string.h> -#include <cbfs.h> -#include <console/console.h> -#include <cpu/intel/haswell/haswell.h> -#include <northbridge/intel/haswell/haswell.h> -#include <northbridge/intel/haswell/raminit.h> -#include <southbridge/intel/lynxpoint/pch.h> -#include <southbridge/intel/lynxpoint/lp_gpio.h> -#include "gpio.h" - -const struct rcba_config_instruction rcba_config[] = { - - /* - * GFX INTA -> PIRQA (MSI) - * D28IP_P1IP PCIE INTA -> PIRQA - * D29IP_E1P EHCI INTA -> PIRQD - * D20IP_XHCI XHCI INTA -> PIRQC (MSI) - * D31IP_SIP SATA INTA -> PIRQF (MSI) - * D31IP_SMIP SMBUS INTB -> PIRQG - * D31IP_TTIP THRT INTC -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQG (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) | - (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)), - RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)), - RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P4IP)), - RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)), - RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)), - RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)), - RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)), - - /* Device interrupt route registers */ - RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */ - RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */ - RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */ - RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */ - RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */ - RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */ - RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */ - RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */ - - /* Disable unused devices (board specific) */ - RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS), - - RCBA_END_CONFIG, -}; - -/* Copy SPD data for on-board memory */ -static void copy_spd(struct pei_data *peid) -{ - char *spd_file; - size_t spd_file_len; - int spd_index = 0; /* No GPIO selection, force index 0 for now */ - - printk(BIOS_DEBUG, "SPD index %d\n", spd_index); - spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD, - &spd_file_len); - if (!spd_file) - die("SPD data not found."); - - if (spd_file_len < - ((spd_index + 1) * sizeof(peid->spd_data[0]))) { - printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); - spd_index = 0; - } - - if (spd_file_len < sizeof(peid->spd_data[0])) - die("Missing SPD data."); - - memcpy(peid->spd_data[0], - spd_file + - spd_index * sizeof(peid->spd_data[0]), - sizeof(peid->spd_data[0])); -} - -void mainboard_romstage_entry(unsigned long bist) -{ - struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = (uintptr_t)DEFAULT_MCHBAR, - .dmibar = (uintptr_t)DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = DEFAULT_PCIEXBAR, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = HPET_ADDR, - .rcba = (uintptr_t)DEFAULT_RCBA, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .temp_mmio_base = 0xfed08000, - .system_type = 5, /* ULT */ - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xff, 0x00, 0xff, 0x00 }, - .ec_present = 1, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 2, - .dimm_channel1_disabled = 2, - .max_ddr3_freq = 1600, - .usb2_ports = { - /* Length, Enable, OCn#, Location */ - /* P0: HOST PORT - J7 */ - { 0x0040, 1, 0, USB_PORT_BACK_PANEL }, - /* P1: HOST PORT - J6 */ - { 0x0040, 1, 1, USB_PORT_BACK_PANEL }, - /* P2: EMPTY */ - { 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - /* P3: SD CARD */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_FLEX }, - /* P4: EMPTY */ - { 0x0000, 0, USB_OC_PIN_SKIP, USB_PORT_SKIP }, - /* P5: WWAN */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, - /* P6: CAMERA */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_FLEX }, - /* P7: BT */ - { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, - }, - .usb3_ports = { - /* Enable, OCn# */ - { 1, 0 }, /* P1: HOST PORT - J7 */ - { 1, 1 }, /* P2: HOST PORT - J6 */ - { 0, USB_OC_PIN_SKIP }, /* P3: EMPTY */ - { 0, USB_OC_PIN_SKIP }, /* P4: EMPTY */ - }, - }; - - struct romstage_params romstage_params = { - .pei_data = &pei_data, - .gpio_map = &mainboard_gpio_map, - .rcba_config = &rcba_config[0], - .bist = bist, - .copy_spd = copy_spd, - }; - - /* Call into the real romstage main with this board's attributes. */ - romstage_common(&romstage_params); -} |