diff options
Diffstat (limited to 'src/mainboard/asus/kfsn4-dre/devicetree.cb')
-rw-r--r-- | src/mainboard/asus/kfsn4-dre/devicetree.cb | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/src/mainboard/asus/kfsn4-dre/devicetree.cb b/src/mainboard/asus/kfsn4-dre/devicetree.cb deleted file mode 100644 index 50e286272f..0000000000 --- a/src/mainboard/asus/kfsn4-dre/devicetree.cb +++ /dev/null @@ -1,194 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1043 0x8162 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - register "maximum_memory_capacity" = "0x1000000000" # 64GB - device pci 18.0 on end # Link 0 == LDT 0 - device pci 18.0 on # Link 1 == LDT 1 [SB on link 1] - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 2e.0 on # Floppy - # Set up interface resources - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off end # Parallel port - device pnp 2e.2 on # Com1 - # Set up interface resources - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - # Set up interface resources - io 0x60 = 0x2f8 - irq 0x70 = 3 - # Select correct package I/O pins - io 0xf1 = 0x04 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - # Set up interface resources - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.7 off end # Game port, MIDI, GPIO 1 & 5 - device pnp 2e.8 off end # GPIO 2 - device pnp 2e.9 on end # GPIO 3, GPIO 4 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - # Set up interface resources - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM n-0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM n-0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM n-0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM n-0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM n-1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM n-1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM n-1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM n-1-1-1 - device i2c 57 on end - end - chip drivers/i2c/w83793 - register "mfc" = "0x29" # Enable FANIN1/FANIN12, FANIN9/FANIN10, and FANIN8/FANCTRL8 inputs - register "fanin" = "0x7f" # Enable monitoring of FANIN6 - FANIN12 - register "fanin_sel" = "0x0f" # Connect FANIN9 - FANIN12 to pins 37 - 40 - register "peci_agent_conf" = "0x33" # Set Intel CPU PECI agent domain (not used by AMD but may affect chip operation) - register "tcase0" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase1" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase2" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tcase3" = "94" # Set maximum Intel CPU case temperature to 94°C (not used by AMD but may affect chip operation) - register "tr_enable" = "0x03" # Enable montoring of TR1 and TR2 - register "td_mode_select" = "0x05" # Use internal temperature sensors and disable unconnected TD3/TD4 - register "td1_critical_temperature" = "85" # Set TD1 (CPU0) critical temperature to 85°C - register "td1_critical_hysteresis" = "80" # Set TD1 (CPU0) critical hysteresis temperature to 80°C - register "td1_warning_temperature" = "70" # Set TD1 (CPU0) warning temperature to 70°C - register "td1_warning_hysteresis" = "65" # Set TD1 (CPU0) warning hysteresis temperature to 65°C - register "td2_critical_temperature" = "85" # Set TD2 (CPU1) critical temperature to 85°C - register "td2_critical_hysteresis" = "80" # Set TD2 (CPU1) critical hysteresis temperature to 80°C - register "td2_warning_temperature" = "70" # Set TD2 (CPU1) warning temperature to 70°C - register "td2_warning_hysteresis" = "65" # Set TD2 (CPU1) warning hysteresis temperature to 65°C - register "tr1_critical_temperature" = "60" # Set TR1 (mainboard) critical temperature to 60°C - register "tr1_critical_hysteresis" = "55" # Set TR1 (mainboard) critical hysteresis temperature to 55°C - register "tr1_warning_temperature" = "50" # Set TR1 (mainboard) warning temperature to 50°C - register "tr1_warning_hysteresis" = "45" # Set TR1 (mainboard) warning hysteresis temperature to 45°C - register "critical_temperature" = "80" # Set critical temperature to 80°C - register "fanctrl1" = "0x48" # Set Fan 4 and Fan 7 to output buffer mode, all others to open drain - register "fanctrl2" = "0x01" # Set Fan 4 to Fan 7 to output buffer mode, Fan 1 to DC mode - register "first_valid_fan_number" = "2" # Fan 1/Fan 2 controls and sensors are not connected to anything - register "td1_fan_select" = "0x00" # All fans to manual mode (no dependence on TD1) - register "td2_fan_select" = "0x00" # All fans to manual mode (no dependence on TD2) - register "td3_fan_select" = "0x00" # All fans to manual mode (no dependence on TD3) - register "td4_fan_select" = "0x00" # All fans to manual mode (no dependence on TD4) - register "tr1_fan_select" = "0x00" # All fans to manual mode (no dependence on TR1) - register "tr2_fan_select" = "0x00" # All fans to manual mode (no dependence on TR2) - register "fan1_nonstop" = "7" # Set Fan 1 minimum speed - register "fan2_nonstop" = "7" # Set Fan 2 minimum speed - register "fan3_nonstop" = "7" # Set Fan 3 minimum speed - register "fan4_nonstop" = "7" # Set Fan 4 minimum speed - register "fan5_nonstop" = "7" # Set Fan 5 minimum speed - register "fan6_nonstop" = "7" # Set Fan 6 minimum speed - register "fan7_nonstop" = "7" # Set Fan 7 minimum speed - register "fan8_nonstop" = "7" # Set Fan 8 minimum speed - register "default_speed" = "100" # All fans to full speed on power up - register "fan1_duty" = "100" # Fan 1 to full speed - register "fan2_duty" = "100" # Fan 2 to full speed - register "fan3_duty" = "100" # Fan 3 to full speed - register "fan4_duty" = "100" # Fan 4 to full speed - register "fan5_duty" = "100" # Fan 5 to full speed - register "fan6_duty" = "100" # Fan 6 to full speed - register "fan7_duty" = "100" # Fan 7 to full speed - register "fan8_duty" = "100" # Fan 8 to full speed - register "vcorea_high_limit_mv" = "1500" # VCOREA (Node 0) high limit to 1.5V - register "vcorea_low_limit_mv" = "900" # VCOREA (Node 0) low limit to 0.9V - register "vcoreb_high_limit_mv" = "1500" # VCOREB (Node 1) high limit to 1.5V - register "vcoreb_low_limit_mv" = "900" # VCOREB (Node 1) low limit to 0.9V - register "vtt_high_limit_mv" = "1250" # VTT (HT link voltage) high limit to 1.25V - register "vtt_low_limit_mv" = "1150" # VTT (HT link voltage) low limit to 1.15V - register "vsen1_high_limit_mv" = "1900" # VSEN1 (Node 0 RAM voltage) high limit to 1.9V - register "vsen1_low_limit_mv" = "1700" # VSEN1 (Node 0 RAM voltage) low limit to 1.7V - register "vsen2_high_limit_mv" = "1900" # VSEN2 (Node 1 RAM voltage) high limit to 1.9V - register "vsen2_low_limit_mv" = "1700" # VSEN2 (Node 1 RAM voltage) low limit to 1.7V - register "vsen3_high_limit_mv" = "3500" # VSEN3 (+3.3V) high limit to 3.5V - register "vsen3_low_limit_mv" = "3100" # VSEN3 (+3.3V) low limit to 3.1V - register "vsen4_high_limit_mv" = "1070" # VSEN4 (+12V, scaling factor ~12.15) high limit to 13V - register "vsen4_low_limit_mv" = "905" # VSEN4 (+12V, scaling factor ~12.15) low limit to 11V - register "vdd_high_limit_mv" = "5200" # 5VDD high limit to 5.2V - register "vdd_low_limit_mv" = "4800" # 5VDD low limit to 4.8V - register "vsb_high_limit_mv" = "5200" # 5VSB high limit to 5.2V - register "vsb_low_limit_mv" = "4800" # 5VSB low limit to 4.8V - register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V - register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V - device i2c 0x2f on end - end - end - device pci 1.1 on end # SM 1 - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # AC'97 Audio (N/A) - device pci 4.1 off end # AC'97 Modem (N/A) - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 0 - device pci 8.0 on end # SATA 1 - device pci 9.0 on # Bridge - device pci 4.0 on end # VGA - end - device pci a.0 off end - device pci b.0 on # Bridge - device pci 0.0 on end # NIC A - end - device pci c.0 on # Bridge - device pci 0.0 on end # LSI SAS - end - device pci d.0 on # Bridge - device pci 0.0 on end # NIC B - end - device pci e.0 on # Bridge - # Slot # PCI E 0 - end - device pci f.0 off end - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end -end |