diff options
Diffstat (limited to 'src/mainboard/asrock/939a785gmh/romstage.c')
-rw-r--r-- | src/mainboard/asrock/939a785gmh/romstage.c | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c deleted file mode 100644 index d6a85ccee8..0000000000 --- a/src/mainboard/asrock/939a785gmh/romstage.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <spd.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <southbridge/amd/sb700/sb700.h> -#include <southbridge/amd/sb700/smbus.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) -#define GPIO2345_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(u32 device, u32 address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} - -#include <southbridge/amd/rs780/rs780.h> -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_init(void) -{ - u8 reg; - - pnp_enter_ext_func_mode(GPIO2345_DEV); - pnp_set_logical_device(GPIO2345_DEV); - - /* Pin 119 ~ 120 is GP21, GP20 */ - reg = pnp_read_config(GPIO2345_DEV, 0x29); - pnp_write_config(GPIO2345_DEV, 0x29, (reg | 2)); - - /* Turn on the Power LED ("Suspend LED" in Super I/O) */ - reg = pnp_read_config(GPIO2345_DEV, 0xf3); - pnp_write_config(GPIO2345_DEV, 0xf3, (reg | 0x40)); - - /* todo document this */ - pnp_write_config(GPIO2345_DEV, 0x2c, 0x1); - pnp_write_config(GPIO2345_DEV, 0x2d, 0x1); - - /* GPO20 - sideport voltage 1 = 1.82 0 = 1.92 - GPI21 - unknown input (NC?) - GPI22 - unknown input (NC?) - GPO23 - mgpuV bit0 - GP24-27 - PS/2 mouse/keyb (only keyb is connected use flip interface for mouse) - */ - pnp_write_config(GPIO2345_DEV, 0x30, 0x07); /* Enable GPIO 2,3,4. */ - pnp_write_config(GPIO2345_DEV, 0xe3, 0xf6); /* dir of GPIO2 11110110*/ - pnp_write_config(GPIO2345_DEV, 0xe4, 0x0e); /* data */ - pnp_write_config(GPIO2345_DEV, 0xe5, 0x00); /* No inversion */ - - /* GPIO30 - unknown output, set to 0 - GPI31 - unknown input NC? - GPI32 - unknown input NC? - GPIO33 - unknown output, set to 0. - GPI34 - unknown input NC? - GPO35 - loadline control 1 = enabled (2 phase clock) 0 = disabled 4 phase clock - GPIO36 - input = HT voltage 1.30V output (low) = HT voltage 1.35V - GP37 - unknown input NC? */ - - pnp_write_config(GPIO2345_DEV, 0xf0, 0xd6); /* dir of GPIO3 11010110*/ - pnp_write_config(GPIO2345_DEV, 0xf1, 0x96); /* data */ - pnp_write_config(GPIO2345_DEV, 0xf2, 0x00); /* No inversion */ - - /* GPO40 - mgpuV bit2 - GPO41 - mgpuV bit1 - GPO42 - IRTX - GPO43 - IRRX - GPIO44 - memory voltage bit2 (input/outputlow) - GPIO45 - memory voltage bit1 (2.60 (000) - 2.95 (111)) - GPIO46 - memory voltage bit0 - GPIO47 - unknown input? */ - - pnp_write_config(GPIO2345_DEV, 0xf4, 0xd0); /* dir of GPIO4 11010000 */ - pnp_write_config(GPIO2345_DEV, 0xf5, 0x83); /* data */ - pnp_write_config(GPIO2345_DEV, 0xf6, 0x00); /* No inversion */ - - pnp_write_config(GPIO2345_DEV, 0xf7, 0x00); /* MFC */ - pnp_write_config(GPIO2345_DEV, 0xf8, 0x00); /* MFC */ - pnp_write_config(GPIO2345_DEV, 0xfe, 0x07); /* trig type */ - pnp_exit_ext_func_mode(GPIO2345_DEV); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - /* sb7xx_51xx_lpc_port80(); */ - sb7xx_51xx_pci_port80(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - enable_rs780_dev8(); - sb7xx_51xx_lpc_init(); - - sio_init(); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid); - - setup_939a785gmh_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs780_early_setup(); - sb7xx_51xx_early_setup(); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if ((cpuid1.edx & 0x6) == 0x6) { - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - } else { - printk(BIOS_DEBUG, "Changing FIDVID not supported\n"); - } - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs780_htinit(); - printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset); - - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - sb7xx_51xx_before_pci_init(); -} |