summaryrefslogtreecommitdiff
path: root/src/mainboard/asi/mb_5blmp
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/asi/mb_5blmp')
-rw-r--r--src/mainboard/asi/mb_5blmp/Config.lb26
-rw-r--r--src/mainboard/asi/mb_5blmp/Options.lb126
-rw-r--r--src/mainboard/asi/mb_5blmp/auto.c2
3 files changed, 77 insertions, 77 deletions
diff --git a/src/mainboard/asi/mb_5blmp/Config.lb b/src/mainboard/asi/mb_5blmp/Config.lb
index 6697a42bfa..f0008f7a65 100644
--- a/src/mainboard/asi/mb_5blmp/Config.lb
+++ b/src/mainboard/asi/mb_5blmp/Config.lb
@@ -1,5 +1,5 @@
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
##
@@ -14,7 +14,7 @@ arch i386 end
driver mainboard.o
-if HAVE_PIRQ_TABLE
+if CONFIG_HAVE_PIRQ_TABLE
object irq_tables.o
end
@@ -22,22 +22,22 @@ end
## Romcc output
##
# makerule ./failover.E
-# depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-# action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+# depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
+# action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
# end
#
# makerule ./failover.inc
-# depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
-# action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+# depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
+# action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
# end
makerule ./auto.E
- depends "$(MAINBOARD)/auto.c ../romcc"
- action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
+ action "../romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c ../romcc"
- action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
+ action "../romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
##
@@ -51,7 +51,7 @@ ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where coreboot is entered)
##
-if USE_FALLBACK_IMAGE
+if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
@@ -73,7 +73,7 @@ ldscript /arch/i386/lib/id.lds
### Things are delicate and we test to see if we should
### failover to another image.
###
-# if USE_FALLBACK_IMAGE
+# if CONFIG_USE_FALLBACK_IMAGE
# ldscript /arch/i386/lib/failover.lds
# mainboardinit ./failover.inc
# end
diff --git a/src/mainboard/asi/mb_5blmp/Options.lb b/src/mainboard/asi/mb_5blmp/Options.lb
index c1ea8c4e24..de9cd83c43 100644
--- a/src/mainboard/asi/mb_5blmp/Options.lb
+++ b/src/mainboard/asi/mb_5blmp/Options.lb
@@ -1,52 +1,52 @@
-uses HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
uses CONFIG_CBFS
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
uses CONFIG_ROM_PAYLOAD
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_ARCH
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESS
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses CROSS_COMPILE
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_RAMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_CROSS_COMPILE
uses CC
-uses HOSTCC
-uses OBJCOPY
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
# uses CONFIG_CONSOLE_VGA
# uses CONFIG_PCI_ROM_RUN
uses CONFIG_VIDEO_MB
-uses PIRQ_ROUTE
+uses CONFIG_PIRQ_ROUTE
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE = 256 * 1024
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+default CONFIG_ROM_SIZE = 256 * 1024
###
### Build options
@@ -55,12 +55,12 @@ default ROM_SIZE = 256 * 1024
##
## Build code for the fallback boot
##
-default HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
-default HAVE_HARD_RESET=0
+default CONFIG_HAVE_HARD_RESET=0
## Delay timer options
##
@@ -70,49 +70,49 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
## Build code to export a programmable irq routing table
##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=5 # TODO?
-default PIRQ_ROUTE=1
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=5 # TODO?
+default CONFIG_PIRQ_ROUTE=1
##
## Build code to export a CMOS option table
##
-# default HAVE_OPTION_TABLE=0
+# default CONFIG_HAVE_OPTION_TABLE=0
###
### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 64 * 1024
-default FALLBACK_SIZE = 128 * 1024
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
+default CONFIG_FALLBACK_SIZE = 128 * 1024
##
## Use a small 8K stack
##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
-default HEAP_SIZE=0x4000
+default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-# default USE_OPTION_TABLE = 0
+#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+# default CONFIG_USE_OPTION_TABLE = 0
-default _RAMBASE = 0x00004000
+default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
-default CROSS_COMPILE=""
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CONFIG_CROSS_COMPILE=""
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
##
## The Serial Console
@@ -122,21 +122,21 @@ default HOSTCC="gcc"
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
@@ -148,13 +148,13 @@ default TTYS0_LCS=0x3
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
-## DEBUG 8 debug-level messages
+## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=9
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=9
## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=9
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9
# VGA Console
# default CONFIG_CONSOLE_VGA=1
diff --git a/src/mainboard/asi/mb_5blmp/auto.c b/src/mainboard/asi/mb_5blmp/auto.c
index 8e8b61c717..a98d640acc 100644
--- a/src/mainboard/asi/mb_5blmp/auto.c
+++ b/src/mainboard/asi/mb_5blmp/auto.c
@@ -38,7 +38,7 @@
static void main(unsigned long bist)
{
/* Initialize the serial console. */
- pc87351_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ pc87351_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();