diff options
Diffstat (limited to 'src/mainboard/amd/mayan/devicetree_morgana.cb')
-rw-r--r-- | src/mainboard/amd/mayan/devicetree_morgana.cb | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/src/mainboard/amd/mayan/devicetree_morgana.cb b/src/mainboard/amd/mayan/devicetree_morgana.cb new file mode 100644 index 0000000000..cfcacfa013 --- /dev/null +++ b/src/mainboard/amd/mayan/devicetree_morgana.cb @@ -0,0 +1,226 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# TODO: Update for mayan + +chip soc/amd/morgana + register "common_config.espi_config" = "{ + .std_io_decode_bitmap = ESPI_DECODE_IO_0x80_EN | ESPI_DECODE_IO_0X2E_0X2F_EN | ESPI_DECODE_IO_0X60_0X64_EN, + .generic_io_range[0] = { + .base = 0x3f8, + .size = 8, + }, + .generic_io_range[1] = { + .base = 0x600, + .size = 256, + }, + .io_mode = ESPI_IO_MODE_QUAD, + .op_freq_mhz = ESPI_OP_FREQ_16_MHZ, + .crc_check_enable = 1, + .alert_pin = ESPI_ALERT_PIN_PUSH_PULL, + .periph_ch_en = 1, + .vw_ch_en = 1, + .oob_ch_en = 1, + .flash_ch_en = 0, + }" + + register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | + GPIO_I2C2_SCL | GPIO_I2C3_SCL" + + register "i2c[0].early_init" = "1" + register "i2c[1].early_init" = "1" + register "i2c[2].early_init" = "1" + register "i2c[3].early_init" = "1" + + # I2C Pad Control RX Select Configuration + register "i2c_pad[0].rx_level" = "I2C_PAD_RX_1_8V" + register "i2c_pad[1].rx_level" = "I2C_PAD_RX_1_8V" + register "i2c_pad[2].rx_level" = "I2C_PAD_RX_1_8V" + register "i2c_pad[3].rx_level" = "I2C_PAD_RX_1_8V" + + register "s0ix_enable" = "true" + + register "pspp_policy" = "DXIO_PSPP_DISABLED" # TODO: reenable when PSPP works + + register "usb_phy_custom" = "1" + register "usb_phy" = "{ + .Usb2PhyPort[0] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb2PhyPort[1] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb2PhyPort[2] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb2PhyPort[3] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb2PhyPort[4] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb2PhyPort[5] = { + .compdistune = 0x3, + .pllbtune = 0x1, + .pllitune = 0x0, + .pllptune = 0xe, + .sqrxtune = 0x3, + .txfslstune = 0x3, + .txpreempamptune = 0x2, + .txpreemppulsetune = 0x0, + .txrisetune = 0x1, + .txvreftune = 0x3, + .txhsxvtune = 0x3, + .txrestune = 0x2, + }, + .Usb3PhyPort[0] = { + .tx_term_ctrl = 0x2, + .rx_term_ctrl = 0x2, + .tx_vboost_lvl_en = 0x0, + .tx_vboost_lvl = 0x5, + }, + .Usb3PhyPort[1] = { + .tx_term_ctrl = 0x2, + .rx_term_ctrl = 0x2, + .tx_vboost_lvl_en = 0x0, + .tx_vboost_lvl = 0x5, + }, + .Usb3PhyPort[2] = { + .tx_term_ctrl = 0x2, + .rx_term_ctrl = 0x2, + .tx_vboost_lvl_en = 0x0, + .tx_vboost_lvl = 0x5, + }, + .ComboPhyStaticConfig[0] = USB_COMBO_PHY_MODE_USB_C, + .ComboPhyStaticConfig[1] = USB_COMBO_PHY_MODE_USB_C, + .BatteryChargerEnable = 0, + .PhyP3CpmP4Support = 0, + }" + + register "gpp_clk_config[0]" = "GPP_CLK_REQ" + register "gpp_clk_config[1]" = "GPP_CLK_REQ" + register "gpp_clk_config[2]" = "GPP_CLK_OFF" + register "gpp_clk_config[3]" = "GPP_CLK_REQ" + + device domain 0 on + device ref iommu on end + device ref gpp_bridge_0 on end # GBE + device ref gpp_bridge_1 on end # WIFI + device ref gpp_bridge_2 on end # NVMe SSD + device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A + device ref gfx on end # Internal GPU (GFX) + device ref gfx_hda on end # Display HD Audio Controller (GFXAZ) + device ref crypto on end # Crypto Coprocessor + device ref xhci_0 on # USB 3.1 (USB0) + chip drivers/usb/acpi + device ref xhci_0_root_hub on + chip drivers/usb/acpi + device ref usb3_port0 on end + end + chip drivers/usb/acpi + device ref usb2_port0 on end + end + chip drivers/usb/acpi + device ref usb2_port1 on end + end + end + end + end + device ref xhci_1 on # USB 3.1 (USB1) + chip drivers/usb/acpi + device ref xhci_1_root_hub on + chip drivers/usb/acpi + device ref usb3_port2 on end + end + chip drivers/usb/acpi + device ref usb3_port3 on end + end + chip drivers/usb/acpi + device ref usb2_port2 on end + end + chip drivers/usb/acpi + device ref usb2_port3 on end + end + chip drivers/usb/acpi + device ref usb2_port4 on end + end + end + end + end + device ref acp on end # Audio Processor (ACP) + end + device ref gpp_bridge_c on # Internal GPP Bridge 2 to Bus C + device ref xhci_2 on + chip drivers/usb/acpi + register "type" = "UPC_TYPE_HUB" + device usb 0.0 alias xhci_2_root_hub on + chip drivers/usb/acpi + device usb 2.0 alias usb2_port5 on end + end + end + end + end + end + end + + device ref i2c_0 on end + device ref i2c_1 on end + device ref i2c_2 on end + device ref i2c_3 on end + device ref uart_0 on end # UART0 + +end |