diff options
Diffstat (limited to 'src/mainboard/amd/mandolin/variants/cereme/devicetree.cb')
| -rw-r--r-- | src/mainboard/amd/mandolin/variants/cereme/devicetree.cb | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb b/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb new file mode 100644 index 0000000000..155328871c --- /dev/null +++ b/src/mainboard/amd/mandolin/variants/cereme/devicetree.cb @@ -0,0 +1,184 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/amd/picasso + register "acp_pin_cfg" = "I2S_PINS_MAX_HDA" + + # Set FADT Configuration + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042" + register "fadt_flags" = "ACPI_FADT_SLEEP_BUTTON" # See table 5-34 ACPI 6.3 spec + + register "emmc_config" = "{ + .timing = SD_EMMC_DISABLE, + }" + + register "has_usb2_phy_tune_params" = "1" + + # Controller0 Port0 Default + register "usb_2_port_tune_params[0]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port1 Default + register "usb_2_port_tune_params[1]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port2 Default + register "usb_2_port_tune_params[2]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port3 Default + register "usb_2_port_tune_params[3]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x03, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x6, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port4 Default + register "usb_2_port_tune_params[4]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # Controller0 Port5 Default + register "usb_2_port_tune_params[5]" = "{ + .com_pds_tune = 0x03, + .sq_rx_tune = 0x3, + .tx_fsls_tune = 0x3, + .tx_pre_emp_amp_tune = 0x02, + .tx_pre_emp_pulse_tune = 0x0, + .tx_rise_tune = 0x1, + .rx_vref_tune = 0x5, + .tx_hsxv_tune = 0x3, + .tx_res_tune = 0x01, + }" + + # USB OC pin mapping; all ports share one OC pin + register "usb_port_overcurrent_pin[0]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[1]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[2]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[3]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[4]" = "USB_OC_PIN_0" + register "usb_port_overcurrent_pin[5]" = "USB_OC_PIN_0" + + # SPI Configuration + register "common_config.spi_config" = "{ + .normal_speed = SPI_SPEED_33M, /* MHz */ + .fast_speed = SPI_SPEED_66M, /* MHz */ + .altio_speed = SPI_SPEED_33M, /* MHz */ + .tpm_speed = SPI_SPEED_33M, /* MHz */ + .read_mode = SPI_READ_MODE_QUAD114, + }" + + # eSPI Configuration + register "common_config.espi_config" = "{ + .std_io_decode_bitmap = ESPI_DECODE_IO_0X60_0X64_EN, + .generic_io_range[0] = { + .base = 0x662, + .size = 8, + }, + + .io_mode = ESPI_IO_MODE_SINGLE, + .op_freq_mhz = ESPI_OP_FREQ_33_MHZ, + .crc_check_enable = 1, + .dedicated_alert_pin = 1, + .periph_ch_en = 0, + .vw_ch_en = 0, + .oob_ch_en = 0, + .flash_ch_en = 0, + }" + + # genral purpose PCIe clock output configuration + register "gpp_clk_config[0]" = "GPP_CLK_REQ" + register "gpp_clk_config[1]" = "GPP_CLK_REQ" + register "gpp_clk_config[2]" = "GPP_CLK_REQ" + register "gpp_clk_config[3]" = "GPP_CLK_OFF" + register "gpp_clk_config[4]" = "GPP_CLK_REQ" + register "gpp_clk_config[5]" = "GPP_CLK_OFF" + register "gpp_clk_config[6]" = "GPP_CLK_OFF" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + device pci 0.0 on end # Root Complex + device pci 0.2 on end # IOMMU + device pci 1.0 on end # Dummy Host Bridge + device pci 1.1 on end # Bridge to PCIe Ethernet chip + device pci 8.0 on end # Dummy Host Bridge + device pci 8.1 on # Bridge to Bus A + device pci 0.0 on end # Internal GPU + device pci 0.1 on end # Display HDA + device pci 0.2 on end # Crypto Coprocessor + device pci 0.3 on end # USB 3.1 + device pci 0.4 off end # USB 3.1 + device pci 0.5 on end # Audio + device pci 0.6 on end # HDA + device pci 0.7 on end # non-Sensor Fusion Hub device + end + device pci 8.2 on # Bridge to Bus B + device pci 0.0 off end # AHCI + device pci 0.1 off end # integrated Ethernet MAC + device pci 0.2 off end # integrated Ethernet MAC + end + device pci 14.0 on end # SMBus + device pci 14.3 on # D14F3 bridge + chip superio/smsc/sio1036 # optional debug card + end + end + device pci 14.6 off end # SDHCI + device pci 18.0 on end # Data fabric [0-7] + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + end # domain + + device mmio 0xfedc9000 on end # UART0 + device mmio 0xfedca000 on end # UART1 + device mmio 0xfedce000 off end # UART2 + device mmio 0xfedcf000 off end # UART3 + +end # chip soc/amd/picasso |