diff options
Diffstat (limited to 'src/drivers/i2c')
-rw-r--r-- | src/drivers/i2c/tpm/cr50.c | 46 |
1 files changed, 21 insertions, 25 deletions
diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c index 1423841231..6c12ee4e9e 100644 --- a/src/drivers/i2c/tpm/cr50.c +++ b/src/drivers/i2c/tpm/cr50.c @@ -59,7 +59,7 @@ __weak int tis_plat_irq_status(void) } /* Wait for interrupt to indicate the TPM is ready */ -static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip) +static int cr50_i2c_wait_tpm_ready(void) { struct stopwatch sw; @@ -76,7 +76,6 @@ static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip) /* * cr50_i2c_read() - read from TPM register * - * @chip: TPM chip information * @addr: register address to read from * @buffer: provided by caller * @len: number of bytes to read @@ -87,8 +86,7 @@ static int cr50_i2c_wait_tpm_ready(struct tpm_chip *chip) * * Return -1 on error, 0 on success. */ -static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr, - uint8_t *buffer, size_t len) +static int cr50_i2c_read(uint8_t addr, uint8_t *buffer, size_t len) { if (tpm_dev.addr == 0) return -1; @@ -103,7 +101,7 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr, } /* Wait for TPM to be ready with response data */ - if (cr50_i2c_wait_tpm_ready(chip) < 0) + if (cr50_i2c_wait_tpm_ready() < 0) return -1; /* Read response data from the TPM */ @@ -118,7 +116,6 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr, /* * cr50_i2c_write() - write to TPM register * - * @chip: TPM chip information * @addr: register address to write to * @buffer: data to write * @len: number of bytes to write @@ -129,8 +126,7 @@ static int cr50_i2c_read(struct tpm_chip *chip, uint8_t addr, * * Returns -1 on error, 0 on success. */ -static int cr50_i2c_write(struct tpm_chip *chip, - uint8_t addr, uint8_t *buffer, size_t len) +static int cr50_i2c_write(uint8_t addr, uint8_t *buffer, size_t len) { if (tpm_dev.addr == 0) return -1; @@ -151,7 +147,7 @@ static int cr50_i2c_write(struct tpm_chip *chip, } /* Wait for TPM to be ready */ - return cr50_i2c_wait_tpm_ready(chip); + return cr50_i2c_wait_tpm_ready(); } /* @@ -161,7 +157,7 @@ static int cr50_i2c_write(struct tpm_chip *chip, * This function will make sure that the AP does not proceed with boot until * TPM finished reset processing. */ -static int process_reset(struct tpm_chip *chip) +static int process_reset(void) { struct stopwatch sw; int rv = 0; @@ -180,7 +176,7 @@ static int process_reset(struct tpm_chip *chip) const uint8_t mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY; - rv = cr50_i2c_read(chip, TPM_ACCESS(0), + rv = cr50_i2c_read(TPM_ACCESS(0), &access, sizeof(access)); if (rv || ((access & mask) == mask)) { /* @@ -212,12 +208,12 @@ static int process_reset(struct tpm_chip *chip) * the RO did not release it), or not yet claimed, if this is verstage or the * older RO did release it. */ -static int claim_locality(struct tpm_chip *chip) +static int claim_locality(void) { uint8_t access; const uint8_t mask = TPM_ACCESS_VALID | TPM_ACCESS_ACTIVE_LOCALITY; - if (cr50_i2c_read(chip, TPM_ACCESS(0), &access, sizeof(access))) + if (cr50_i2c_read(TPM_ACCESS(0), &access, sizeof(access))) return -1; if ((access & mask) == mask) { @@ -226,11 +222,11 @@ static int claim_locality(struct tpm_chip *chip) } access = TPM_ACCESS_REQUEST_USE; - if (cr50_i2c_write(chip, TPM_ACCESS(0), + if (cr50_i2c_write(TPM_ACCESS(0), &access, sizeof(access))) return -1; - if (cr50_i2c_read(chip, TPM_ACCESS(0), &access, sizeof(access))) + if (cr50_i2c_read(TPM_ACCESS(0), &access, sizeof(access))) return -1; if ((access & mask) != mask) { @@ -245,7 +241,7 @@ static int claim_locality(struct tpm_chip *chip) static uint8_t cr50_i2c_tis_status(struct tpm_chip *chip) { uint8_t buf[4]; - if (cr50_i2c_read(chip, TPM_STS(chip->vendor.locality), + if (cr50_i2c_read(TPM_STS(chip->vendor.locality), buf, sizeof(buf)) < 0) { printk(BIOS_ERR, "%s: Failed to read status\n", __func__); return 0; @@ -257,7 +253,7 @@ static uint8_t cr50_i2c_tis_status(struct tpm_chip *chip) static void cr50_i2c_tis_ready(struct tpm_chip *chip) { uint8_t buf[4] = { TPM_STS_COMMAND_READY }; - cr50_i2c_write(chip, TPM_STS(chip->vendor.locality), buf, sizeof(buf)); + cr50_i2c_write(TPM_STS(chip->vendor.locality), buf, sizeof(buf)); mdelay(CR50_TIMEOUT_SHORT_MS); } @@ -272,7 +268,7 @@ static int cr50_i2c_wait_burststs(struct tpm_chip *chip, uint8_t mask, stopwatch_init_msecs_expire(&sw, CR50_TIMEOUT_LONG_MS); while (!stopwatch_expired(&sw)) { - if (cr50_i2c_read(chip, TPM_STS(chip->vendor.locality), + if (cr50_i2c_read(TPM_STS(chip->vendor.locality), buf, sizeof(buf)) != 0) { mdelay(CR50_TIMEOUT_SHORT_MS); continue; @@ -310,7 +306,7 @@ static int cr50_i2c_tis_recv(struct tpm_chip *chip, uint8_t *buf, } /* Read first chunk of burstcnt bytes */ - if (cr50_i2c_read(chip, addr, buf, burstcnt) != 0) { + if (cr50_i2c_read(addr, buf, burstcnt) != 0) { printk(BIOS_ERR, "%s: Read failed\n", __func__); goto out_err; } @@ -331,7 +327,7 @@ static int cr50_i2c_tis_recv(struct tpm_chip *chip, uint8_t *buf, goto out_err; len = MIN(burstcnt, expected - current); - if (cr50_i2c_read(chip, addr, buf + current, len) != 0) { + if (cr50_i2c_read(addr, buf + current, len) != 0) { printk(BIOS_ERR, "%s: Read failed\n", __func__); goto out_err; } @@ -390,7 +386,7 @@ static int cr50_i2c_tis_send(struct tpm_chip *chip, uint8_t *buf, size_t len) /* Use burstcnt - 1 to account for the address byte * that is inserted by cr50_i2c_write() */ limit = MIN(burstcnt - 1, len); - if (cr50_i2c_write(chip, TPM_DATA_FIFO(chip->vendor.locality), + if (cr50_i2c_write(TPM_DATA_FIFO(chip->vendor.locality), &buf[sent], limit) != 0) { printk(BIOS_ERR, "%s: Write failed\n", __func__); goto out_err; @@ -409,7 +405,7 @@ static int cr50_i2c_tis_send(struct tpm_chip *chip, uint8_t *buf, size_t len) } /* Start the TPM command */ - if (cr50_i2c_write(chip, TPM_STS(chip->vendor.locality), tpm_go, + if (cr50_i2c_write(TPM_STS(chip->vendor.locality), tpm_go, sizeof(tpm_go)) < 0) { printk(BIOS_ERR, "%s: Start command failed\n", __func__); goto out_err; @@ -454,7 +450,7 @@ static int cr50_i2c_probe(struct tpm_chip *chip, uint32_t *did_vid) for (retries = 20; retries > 0; retries--) { int rc; - rc = cr50_i2c_read(chip, TPM_DID_VID(0), (uint8_t *)did_vid, 4); + rc = cr50_i2c_read(TPM_DID_VID(0), (uint8_t *)did_vid, 4); /* Exit once DID and VID verified */ if (!rc && (*did_vid == CR50_DID_VID)) { @@ -492,10 +488,10 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned int bus, uint32_t dev_addr) return -1; if (ENV_SEPARATE_VERSTAGE || ENV_BOOTBLOCK) - if (process_reset(chip)) + if (process_reset()) return -1; - if (claim_locality(chip)) + if (claim_locality()) return -1; printk(BIOS_DEBUG, "cr50 TPM 2.0 (i2c %u:0x%02x id 0x%x)\n", |