summaryrefslogtreecommitdiff
path: root/src/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'src/cpu')
-rw-r--r--src/cpu/amd/family_10h-family_15h/fidvid.c39
-rw-r--r--src/cpu/amd/family_10h-family_15h/init_cpus.c2
2 files changed, 26 insertions, 15 deletions
diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c
index 2eb55e8499..d59f23a7a8 100644
--- a/src/cpu/amd/family_10h-family_15h/fidvid.c
+++ b/src/cpu/amd/family_10h-family_15h/fidvid.c
@@ -122,7 +122,7 @@ static void enable_fid_change(u8 fid)
{
u32 dword;
u32 nodes;
- device_t dev;
+ pci_devfn_t dev;
int i;
nodes = get_nodes();
@@ -139,7 +139,8 @@ static void enable_fid_change(u8 fid)
}
}
-static void applyBoostFIDOffset(device_t dev, uint32_t nodeid) {
+static void applyBoostFIDOffset(pci_devfn_t dev, uint32_t nodeid)
+{
// BKDG 2.4.2.8
// Fam10h revision E only, but E is apparently not supported yet, therefore untested
if ((cpuid_edx(0x80000007) & CPB_MASK)
@@ -164,7 +165,8 @@ static void applyBoostFIDOffset(device_t dev, uint32_t nodeid) {
}
}
-static void enableNbPState1( device_t dev ) {
+static void enableNbPState1(pci_devfn_t dev)
+{
uint64_t cpuRev = mctGetLogicalCPUID(0xFF);
if (cpuRev & AMD_FAM10_C3) {
u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK);
@@ -184,7 +186,8 @@ static void enableNbPState1( device_t dev ) {
}
}
-static u8 setPStateMaxVal(device_t dev) {
+static u8 setPStateMaxVal(pci_devfn_t dev)
+{
u8 i, maxpstate=0;
for (i = 0; i < NM_PS_REG; i++) {
msr_t msr = rdmsr(PS_REG_BASE + i);
@@ -204,7 +207,8 @@ static u8 setPStateMaxVal(device_t dev) {
return maxpstate;
}
-static void dualPlaneOnly( device_t dev ) {
+static void dualPlaneOnly(pci_devfn_t dev)
+{
// BKDG 2.4.2.7
uint64_t cpuRev = mctGetLogicalCPUID(0xFF);
@@ -248,7 +252,8 @@ static int vidTo100uV(u8 vid)
return voltage;
}
-static void setVSRamp(device_t dev) {
+static void setVSRamp(pci_devfn_t dev)
+{
/* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime]
* If this field accepts 8 values between 10 and 500 us why
* does page 324 say "BIOS should set this field to 001b."
@@ -263,7 +268,7 @@ static void setVSRamp(device_t dev) {
pci_write_config32(dev, 0xd8, dword);
}
-static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
+static void recalculateVsSlamTimeSettingOnCorePre(pci_devfn_t dev)
{
u8 pviModeFlag;
u8 highVoltageVid, lowVoltageVid, bValue;
@@ -447,7 +452,8 @@ static u32 power_up_down(int node, u8 procPkg) {
}
static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) {
- device_t dev = NODE_PCI(node, 3);
+
+ pci_devfn_t dev = NODE_PCI(node, 3);
/* Program fields in Clock Power/Control register0 (F3xD4) */
@@ -471,7 +477,9 @@ static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t pr
}
-static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t procPkg) {
+static void config_power_ctrl_misc_reg(pci_devfn_t dev, uint64_t cpuRev,
+ uint8_t procPkg)
+{
/* check PVI/SVI */
uint32_t dword = pci_read_config32(dev, 0xa0);
@@ -504,7 +512,8 @@ static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t pr
pci_write_config32(dev, 0xa0, dword);
}
-static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) {
+static void config_nb_syn_ptr_adj(pci_devfn_t dev, uint64_t cpuRev)
+{
/* Note the following settings are additional from the ported
* function setFidVidRegs()
*/
@@ -526,7 +535,9 @@ static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) {
pci_write_config32(dev, 0xdc, dword);
}
-static void config_acpi_pwr_state_ctrl_regs(device_t dev, uint64_t cpuRev, uint8_t procPkg) {
+static void config_acpi_pwr_state_ctrl_regs(pci_devfn_t dev, uint64_t cpuRev,
+ uint8_t procPkg)
+{
if (is_fam15h()) {
/* Family 15h BKDG Rev. 3.14 D18F3x80 recommended settings */
pci_write_config32(dev, 0x80, 0xe20be281);
@@ -594,7 +605,7 @@ static void prep_fid_change(void)
{
u32 dword;
u32 nodes;
- device_t dev;
+ pci_devfn_t dev;
int i;
/* This needs to be run before any Pstate changes are requested */
@@ -809,7 +820,7 @@ static u32 needs_NB_COF_VID_update(void)
static u32 init_fidvid_core(u32 nodeid, u32 coreid)
{
- device_t dev;
+ pci_devfn_t dev;
u32 vid_max;
u32 fid_max = 0;
u8 nb_cof_vid_update = needs_NB_COF_VID_update();
@@ -973,7 +984,7 @@ static void finalPstateChange(void)
static void init_fidvid_stage2(u32 apicid, u32 nodeid)
{
msr_t msr;
- device_t dev;
+ pci_devfn_t dev;
u32 reg1fc;
u32 dtemp;
u32 nbvid;
diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c
index 4405e3cf95..3c13e36fca 100644
--- a/src/cpu/amd/family_10h-family_15h/init_cpus.c
+++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c
@@ -541,7 +541,7 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
static u32 is_core0_started(u32 nodeid)
{
u32 htic;
- device_t device;
+ pci_devfn_t device;
device = NODE_PCI(nodeid, 0);
htic = pci_read_config32(device, HT_INIT_CONTROL);
htic &= HTIC_ColdR_Detect;