diff options
Diffstat (limited to 'src/cpu/samsung/exynos5250/dmc_common.c')
| -rw-r--r-- | src/cpu/samsung/exynos5250/dmc_common.c | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/src/cpu/samsung/exynos5250/dmc_common.c b/src/cpu/samsung/exynos5250/dmc_common.c deleted file mode 100644 index 624097b12b..0000000000 --- a/src/cpu/samsung/exynos5250/dmc_common.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Mem setup common file for different types of DDR present on SMDK5250 boards. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <delay.h> -#include "setup.h" -#include "dmc.h" -#include "clk.h" -#include "setup.h" - -#define ZQ_INIT_TIMEOUT 10000 - -int dmc_config_zq(struct mem_timings *mem, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val = 0; - int i; - - /* - * ZQ Calibration: - * Select Driver Strength, - * long calibration for manual calibration - */ - val = PHY_CON16_RESET_VAL; - val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT; - val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT; - val |= ZQ_CLK_DIV_EN; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* Disable termination */ - if (mem->zq_mode_noterm) - val |= PHY_CON16_ZQ_MODE_NOTERM_MASK; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* ZQ_MANUAL_START: Enable */ - val |= ZQ_MANUAL_STR; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* ZQ_MANUAL_START: Disable */ - val &= ~ZQ_MANUAL_STR; - - /* - * Since we are manually calibrating the ZQ values, - * we are looping for the ZQ_init to complete. - */ - i = ZQ_INIT_TIMEOUT; - while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - udelay(1); - i--; - } - if (!i) - return -1; - writel(val, &phy0_ctrl->phy_con16); - - i = ZQ_INIT_TIMEOUT; - while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - udelay(1); - i--; - } - if (!i) - return -1; - writel(val, &phy1_ctrl->phy_con16); - - return 0; -} - -void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) -{ - unsigned long val; - - if (mode == DDR_MODE_DDR3) { - val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE; - writel(val, &dmc->phycontrol0); - } - - /* Update DLL Information: Force DLL Resynchronization */ - val = readl(&dmc->phycontrol0); - val |= FP_RSYNC; - writel(val, &dmc->phycontrol0); - - /* Reset Force DLL Resynchronization */ - val = readl(&dmc->phycontrol0); - val &= ~FP_RSYNC; - writel(val, &dmc->phycontrol0); -} - -void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - int channel, chip; - - for (channel = 0; channel < mem->dmc_channels; channel++) { - unsigned long mask; - - mask = channel << DIRECT_CMD_CHANNEL_SHIFT; - for (chip = 0; chip < mem->chips_to_configure; chip++) { - int i; - - mask |= chip << DIRECT_CMD_CHIP_SHIFT; - - /* Sending NOP command */ - writel(DIRECT_CMD_NOP | mask, &dmc->directcmd); - - /* - * TODO(alim.akhtar@samsung.com): Do we need these - * delays? This one and the next were not there for - * DDR3. - */ - udelay(100); - - /* Sending EMRS/MRS commands */ - for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { - writel(mem->direct_cmd_msr[i] | mask, - &dmc->directcmd); - udelay(100); - } - - if (mem->send_zq_init) { - /* Sending ZQINIT command */ - writel(DIRECT_CMD_ZQINIT | mask, - &dmc->directcmd); - /* - * FIXME: This was originally sdelay(10000) - * in the imported u-boot code. That may have - * been meant to be sdelay(0x10000) since that - * was used elsewhere in this function. Either - * way seems to work, though. - */ - udelay(12); - } - } - } -} - -void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - int channel, chip; - - for (channel = 0; channel < mem->dmc_channels; channel++) { - unsigned long mask; - - mask = channel << DIRECT_CMD_CHANNEL_SHIFT; - for (chip = 0; chip < mem->chips_per_channel; chip++) { - mask |= chip << DIRECT_CMD_CHIP_SHIFT; - - /* PALL (all banks precharge) CMD */ - writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); - udelay(100); - } - } -} - -void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - writel(mem->memconfig, &dmc->memconfig0); - writel(mem->memconfig, &dmc->memconfig1); - writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); - writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); -} |